Skip to the content
4 layers266.2 × 144.3 mmEnigma encoder, the printed circuit board in 3D

A repository containing data, designs and software for an Enigma Machine.

Size
266.2 × 144.3 mm
Copper layers
4
Thickness
1.6 mm
Parts
59
Nets
126
Pads
312
Tracks, vias
432, 33
Pours
54
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 Oct 2025
Updated
4 Nov 2026

Overview

Enigma encoder is an open-source printed circuit board by thepinkmile, from the thepinkmile/STEM-Enigma repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 266.2 × 144.3 mm with 59 parts on 126 nets, routed with 432 tracks and 33 vias.

It is built around the EPM570T144C5N, SIT8918BAU71-33E-50.000000G and VJ0402A150FXQCW1BC. Its parts include 38 connectors, 14 capacitors, 1 resistor, 1 IC and 1 crystal. It belongs with the FPGA and CPLD boards of this library.

Main components

3

README

README.md

STEM-Enigma

A repository containing data, designs and software for an Enigma Machine.

Parts

59
QtyValueFootprintReferences
3653258-0329SamacSys_Footprints:SHDR3W120P0X350_1X3_1260X760X1050PJ1, J2, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23 +20
13GRM033Z71A104ME14DSamacSys_Footprints:GRM033D70J224ME01DC1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13
4TestPoint_SmallTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3, TP4
1Conn_02x05_Odd_EvenConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ38
1Conn_02x06_Odd_EvenConnector_IDC:IDC-Header_2x06_P2.54mm_VerticalJ37
1EPM570T144C5NSamacSys_Footprints:QFP50P2200X2200X160-144NIC1
1ERJ-1GNF1001CSamacSys_Footprints:ERJ1GN__0201_R1
1SIT8918BAU71-33E-50.000000GSamacSys_Footprints:SIT8918BAU7133E50000000GY1
1VJ0402A150FXQCW1BCSamacSys_Footprints:CAPC1005X55NC14

Similar boards

  • 4 layers80 × 80 mmTap, the printed circuit board in 3D

    Tap

    ervanalb/lens

    Tap live cabling for inspection and injection

    59 parts515
  • 4 layers23.7 × 34.2 mmSmartWatch V5, the printed circuit board in 3D

    SmartWatch V5

    Bellafaire/ESP32-Smart-Watch

    An open source smartwatch based on the ESP32 compatible with the Arduino IDE.

    59 parts258MIT
  • 4 layers97 × 80.9 mmModule17-HMI, the printed circuit board in 3D

    Module17-HMI

    M17-Project/Module_17

    M17 modem board for 9600-baud capable radios

    59 parts129CERN-OHL-W-2.0
  • 4 layers25 × 40 mmScarab, the printed circuit board in 3D

    Scarab

    MarkR42/malenki-nano

    Speed controller and receiver for small robots

    59 parts73GPL-3.0
  • 4 layers283.2 × 131.5 mmHandyWork PCB, the printed circuit board in 3D

    HandyWork PCB

    AxelVoitier/keebs

    Axel's keebs

    59 parts71
  • 4 layers17.8 × 51.6 mmBonsai C4, the printed circuit board in 3D

    Bonsai C4

    customMK/Bonsai-C

    An open-source ARM-based microcontroller board

    59 parts71
  • 4 layers37 × 27.5 mmThreeDeeO, the printed circuit board in 3D

    ThreeDeeO

    citrus3000psi/3DORGB

    RGB Project for most 3DO consoles.

    59 parts44

Questions

How big is the Enigma encoder PCB?

It measures 266.2 × 144.3 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Enigma encoder use?

59 parts, built around the EPM570T144C5N, SIT8918BAU71-33E-50.000000G and VJ0402A150FXQCW1BC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Enigma encoder KiCad files?

From the thepinkmile/STEM-Enigma repository on GitHub, at the commit this page was made from: the board is Electronics/KiCad/enigma_encoder/enigma_encoder.kicad_pcb and its schematic Electronics/KiCad/enigma_encoder/enigma_encoder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Enigma encoder design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).