
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

an electronic wind instrument / clarinet / flute / not sure
Enclosurefinal01 is an open-source printed circuit board by thenfour, from the thenfour/Clarinoid repository on GitHub. It is a 2-layer board of 527.9 × 725.5 mm with 332 parts on 218 nets, routed with 3,028 tracks and 474 vias.
It is built around the SN74AHCT125N, TCA9554PW and TLV75733PDBV, with the PCM5102APW, 1N4148WS and PDC54-11GWA among its other parts. Its parts include 94 resistors, 78 connectors, 66 capacitors, 36 diodes and 22 ICs. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 220 | Resistor_SMD:R_0805_2012Metric | R47, R47, R48, R48, R49, R49, R50, R50, R51, R51, R52, R52, R53, R53, R54, R54 +14 |
| 26 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15, R15, R16, R16, R17, R17, R18, R18, R19, R19, R20, R20, R21, R21, R22, R22 +10 |
| 22 | LED | clarinoid2:LED_D5.0mm_withbottomtext | D10, D10, D11, D11, D12, D12, D13, D13, D14, D14, D15, D15, D21, D21, D22, D22 +6 |
| 22 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H2, H2, H3, H3, H4, H4, H5, H5, H6, H6, H10, H10, H11, H11, H12, H12 +6 |
| 20 | 22uF | Capacitor_SMD:C_1206_3216Metric | C21, C21, C22, C22, C23, C23, C24, C24, C27, C27, C28, C28, C29, C29, C30, C30 +4 |
| 20 | Conn_01x04 | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J34, J34, J49, J49, J50, J50, J51, J51, J52, J52, J53, J53, J55, J55, J58, J58 +4 |
| 14 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C2, C9, C9, C10, C10, C12, C12, C15, C15, C19, C19, C25, C25 |
| 10 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C1, C6, C6, C7, C7, C11, C11, C13, C13 |
| 8 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C3, C3, C4, C4, C5, C5, C8, C8 |
| 8 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J9, J9, J26, J26, J54, J54, J56, J56 |
| 8 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J20, J20, J21, J21, J23, J23, J24, J24 |
| 6 | 22R | Resistor_SMD:R_1206_3216Metric | R1, R1, R2, R2, R3, R3 |
| 6 | 470R | Resistor_SMD:R_1206_3216Metric | R4, R4, R5, R5, R11, R11 |
| 6 | Amphenol ACJS-MHOM | SamacSys_Parts:ACJSMHOM | J11, J11, J12, J12, J14, J14 |
| 4 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C20, C20, C33, C33 |
| 4 | 0.22uF | Capacitor_SMD:C_0805_2012Metric | C14, C14, C18, C18 |
| 4 | 10uF | Capacitor_SMD:C_1206_3216Metric | C16, C16, C26, C26 |
| 4 | 4.7k | Resistor_SMD:R_1206_3216Metric | R6, R6, R7, R7 |
| 4 | 47R | Resistor_SMD:R_1206_3216Metric | R12, R12, R13, R13 |
| 4 | 5.1k | Resistor_SMD:R_1206_3216Metric | R14, R14, R25, R25 |
| 4 | Conn_01x06 | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J22, J22, J57, J57 |
| 4 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J10, J10, J19, J19 |
| 4 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J3, J3, J4, J4 |
| 4 | Conn_01x12 | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J15, J15, J16, J16 |
| 4 | NetTie_2 | clarinoid2:NetTie-2_SMD_Pad1.0mm | NT4, NT4, NT5, NT5 |
| 4 | R | Resistor_THT:R_Axial_Power_L25.0mm_W9.0mm_P27.94mm | R30, R30, R31, R31 |
| 4 | SN74AHCT125N | SamacSys_Parts:DIP794W53P254L1930H508Q14N | IC1, IC1, IC2, IC2 |
| 4 | TLV75733PDBV | Package_TO_SOT_SMD:SOT-23-5 | U2, U2, U3, U3 |
| 2 | 0.5R | Resistor_SMD:R_1206_3216Metric | R29, R29 |
| 2 | 100% | LED_SMD:LED_0805_2012Metric | D20, D20 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric | R8, R8 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R28, R28 |
| 2 | 1N4148WS | Diode_SMD:D_SOD-323 | D2, D2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C17, C17 |
| 2 | 1uH-psa | clarinoid2:Inductor_MCS0630-1R0MN2 | L1, L1 |
| 2 | 220R | Resistor_SMD:R_1206_3216Metric | R10, R10 |
| 2 | 25% | LED_SMD:LED_0805_2012Metric | D17, D17 |
| 2 | 2R | Resistor_SMD:R_1206_3216Metric | R27, R27 |
| 2 | 3.3v | Diode_SMD:D_MiniMELF | D1, D1 |
| 2 | 50% | LED_SMD:LED_0805_2012Metric | D18, D18 |
| 2 | 6N138 | Package_DIP:DIP-8_W7.62mm | U7, U7 |
| 2 | 75% | LED_SMD:LED_0805_2012Metric | D19, D19 |
| 2 | APCI0108-P001A Teensy_4.0_MicroMod | clarinoid2:APCI0108-P001A M.2 MicroMod 21992304 | U4, U4 |
| 2 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1, BT1 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5, J5 |
| 2 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J18, J18 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1, J1 |
| 2 | Conn_01x08 | Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J33, J33 |
| 2 | Conn_01x09 | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J13, J13 |
| 2 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2, J2 |
| 2 | Conn_01x09 | Connector_JST:JST_PH_B9B-PH-K_1x09_P2.00mm_Vertical | J25, J25 |
| 2 | Injoinic IP5306 battery charge | clarinoid2:SOIC127P599X155-9N (IP5306) | IC3, IC3 |
| 2 | M.2 riser 2.5mm | clarinoid2:Sinhoo SMTSO2530CTJ | H1, H1 |
| 2 | Micromod outline | clarinoid2:Teensy_4.0_MicroMod outline fab | U6, U6 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT1 |
| 2 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1, U1 |
| 2 | PDC54-11GWA | SamacSys_Parts:DIPS1524W75P254L2520H805Q18N | DS1, DS1 |
| 2 | RJ45_LED_Shielded | Connector_RJ:RJ45_Amphenol_RJHSE538X | J17, J17 |
| 2 | TCA9554PW | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U5, U5 |
| 2 | USB_A | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J32, J32 |
| 2 | XKB_U262-16XN-4BVC11 USB-C recept | clarinoid2:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J6, J6 |
| 2 | korgpwr | LED_SMD:LED_0805_2012Metric | D16, D16 |
| 2 | ssd1306_graphic | clarinoid2:SSD1306_128x64_approximate | U8, U8 |

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure


thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

/2.0/ChannelSelector.kicad_pcb.jpg?size=s&soon)

bobby1321/High-Current-5V-Regulator
High Current 5V DC Buck Converter Board

gitlunard/HW
Il progetto è descritto nella cartella hw-doc. Essendo il progetto giovane, qualcosa potrebbe mancare!!! Aiutaci a completarlo!!!


rohamid/chroma-pixel-zeta
The minimal configuration of Chroma Pixel board for GUI application
xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice
It measures 527.9 × 725.5 mm and has 2 copper layers, 1.6 mm thick.
332 parts, built around the SN74AHCT125N, TCA9554PW, TLV75733PDBV and PCM5102APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thenfour/Clarinoid repository on GitHub, at the commit this page was made from: the board is CAD/bommanoid/06 enclosure final/enclosurefinal01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thenfour before reusing the design.