
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure
Texas InstrumentsExtended
-40℃~+85℃ 1.65V~5.5V 10mA 25mA 3.5uA 400kHz 4V 500mV 8 8 I2C、SMBus Interrupt Output Push-Pull Reset function、Cascading and address extension、Built-in LED driver TSSOP-16 I/O Expanders ROHS
The TCA9554PW is an i, O Expander made by Texas Instruments in a TSSOP-16 package with 16 pins. -40℃~+85℃ 1.65V~5.5V 10mA 25mA 3.5uA 400kHz 4V 500mV 8 8 I2C、SMBus Interrupt Output Push-Pull Reset function、Cascading and address extension、Built-in LED driver TSSOP-16 I/O Expanders ROHS.
PCBKit's library has its KiCad symbol (Interface_Expansion:TCA9554PW, from KiCad's library) and its footprint (Package_SO:TSSOP-16_4.4x5mm_P0.65mm, from KiCad's library), ready for a KiCad board. 5,673 are in stock at JLCPCB (part C477924). 11 open-source boards in 4 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | Over operating free-air temperature range | min -0.5 · max 6 V | 5 |
| Input voltage VI | Over operating free-air temperature range; footnote (2) | min -0.5 · max 6 V | 5 |
| Output voltage (2) VO | Over operating free-air temperature range | min -0.5 · max 6 V | 5 |
| Input clamp current IIK | VI < 0 | max -20 mA | 5 |
| Output clamp current IOK | VO < 0 | max -20 mA | 5 |
| Input-output clamp current IIOK | VO < 0 or VO > VCC; limit printed ±20 | max 20 mA | 5 |
| Continuous output low current through a single P-port IOL | VO = 0 to VCC | max 50 mA | 5 |
| Continuous output high current through a single P-port IOH | VO = 0 to VCC | max -50 mA | 5 |
| Continuous current through GND by all P-ports ICC | max 250 mA | 5 | |
| Continuous current through VCC ICC | max -160 mA | 5 | |
| Maximum junction temperature Tj(MAX) | max 100 °C | 5 | |
| Storage temperature Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 (1); value printed ±2000 | max 2000 V | 5 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101 (2); value printed ±1000 | max 1000 V | 5 |
| Supply voltage VCC | min 1.65 · max 5.5 V | 5 | |
| High-level input voltage VIH | A0, A1, A2, P7–P0; VCC = 1.65 V to 2.7 V; minimum 0.7 × VCC | max 5.5 V | 5 |
| High-level input voltage VIH | A0, A1, A2, P7–P0; VCC = 3 V to 5.5 V; minimum 0.8 × VCC | max 5.5 V | 5 |
| Low-level input voltage VIL | SCL, SDA; VCC = 1.65 V to 5.5 V; maximum 0.3 × VCC | min -0.5 V | 5 |
| Low-level input voltage VIL | A0, A1, A2, P7–P0; VCC = 1.65 V to 2.7 V; maximum 0.3 × VCC | min -0.5 V | 5 |
| Low-level input voltage VIL | A0, A1, A2, P7–P0; VCC = 3 V to 5.5 V; maximum 0.2 × VCC | min -0.5 V | 5 |
| Low-level output current (2) IOL | P00–P07, P10–P17; Tj ≤ 65°C | max 25 mA | 5 |
| Low-level output current (2) IOL | P00–P07, P10–P17; Tj ≤ 85°C | max 18 mA | 5 |
| Low-level output current (2) IOL | P00–P07, P10–P17; Tj ≤ 100°C | max 9 mA | 5 |
| Low-level output current (2) IOL | INT, SDA; Tj ≤ 85°C | max 6 mA | 5 |
| Low-level output current (2) IOL | INT, SDA; Tj ≤ 100°C | max 3 mA | 5 |
| High-level output current IOH | Any P-port, P7–P0 | max -10 mA | 5 |
| Continuous current through GND ICC | All P-ports P7-P0, INT, and SDA | max 200 mA | 5 |
| Continuous current through VCC ICC | All P-ports P7-P0 | max -80 mA | 5 |
| Operating free-air temperature TA | min -40 · max 85 °C | 6 | |
| Junction-to-ambient thermal resistance RθJA | PW (TSSOP), 16 PINS | typ 122 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | PW (TSSOP), 16 PINS | typ 56.4 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | PW (TSSOP), 16 PINS | typ 67.1 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | PW (TSSOP), 16 PINS | typ 10.8 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | PW (TSSOP), 16 PINS | typ 66.5 °C/W | 6 |
| Input diode clamp voltage VIK | II = –18 mA; VCC = 1.65 V to 5.5 V | min -1.2 V | 6 |
| Power-on reset voltage, VCC rising VPORR | VI = VCC or GND, IO = 0 | typ 1.2 · max 1.5 V | 6 |
| Power-on reset voltage, VCC falling VPORF | VI = VCC or GND, IO = 0 | min 0.75 · typ 1 V | 6 |
| P-port high-level output voltage (2) VOH | IOH = –8 mA; VCC = 1.65 V | min 1.2 V | 6 |
| P-port high-level output voltage (2) VOH | IOH = –8 mA; VCC = 2.3 V | min 1.8 V | 6 |
| P-port high-level output voltage (2) VOH | IOH = –8 mA; VCC = 3 V | min 2.6 V | 6 |
| P-port high-level output voltage (2) VOH | IOH = –8 mA; VCC = 4.5 V | min 4.1 V | 6 |
| P-port high-level output voltage (2) VOH | IOH = –10 mA; VCC = 1.65 V | min 1.1 V | 6 |
| P-port high-level output voltage (2) VOH | IOH = –10 mA; VCC = 2.3 V | min 1.7 V | 6 |
| P-port high-level output voltage (2) VOH | IOH = –10 mA; VCC = 3 V | min 2.5 V | 6 |
| P-port high-level output voltage (2) VOH | IOH = –10 mA; VCC = 4.5 V | min 4 V | 6 |
| SDA (3) IOL | VOL = 0.4 V; VCC = 1.65 V to 5.5 V | min 3 · typ 11 mA | 6 |
| P port IOL | VOL = 0.5 V; VCC = 1.65 V; footnote (4) | min 8 · typ 10 mA | 6 |
| P port IOL | VOL = 0.5 V; VCC = 2.3 V; footnote (4) | min 8 · typ 13 mA | 6 |
| P port IOL | VOL = 0.5 V; VCC = 3 V; footnote (4) | min 8 · typ 15 mA | 6 |
| P port IOL | VOL = 0.5 V; VCC = 4.5 V; footnote (4) | min 8 · typ 17 mA | 6 |
| P port IOL | VOL = 0.7 V; VCC = 1.65 V; footnote (4) | min 10 · typ 14 mA | 6 |
| P port IOL | VOL = 0.7 V; VCC = 2.3 V; footnote (4) | min 10 · typ 17 mA | 6 |
| P port IOL | VOL = 0.7 V; VCC = 3 V; footnote (4) | min 10 · typ 20 mA | 6 |
| P port IOL | VOL = 0.7 V; VCC = 4.5 V; footnote (4) | min 10 · typ 24 mA | 6 |
| INT (5) IOL | VOL = 0.4 V; VCC = 1.65 V to 5.5 V | min 3 · typ 7 mA | 6 |
| SCL, SDA II | VI = VCC or GND; VCC = 1.65 V to 5.5 V; limit printed ±1 | max 1 uA | 6 |
| A0, A1, A2 II | VI = VCC or GND; VCC = 1.65 V to 5.5 V; limit printed ±1 | max 1 uA | 6 |
| P port IIH | VI = VCC; VCC = 1.65 V to 5.5 V | max 1 uA | 6 |
| P port IIL | VI = GND; VCC = 1.65 V to 5.5 V | max -100 uA | 6 |
| Operating mode ICC | VCC = 5.5 V; VI = VCC or GND, IO = 0, I/O = inputs, fSCL = 400 kHz, no load, tr,max = 300 ns | typ 34 uA | 7 |
| Operating mode ICC | VCC = 3.6 V; VI = VCC or GND, IO = 0, I/O = inputs, fSCL = 400 kHz, no load, tr,max = 300 ns | typ 15 uA | 7 |
| Operating mode ICC | VCC = 2.7 V; VI = VCC or GND, IO = 0, I/O = inputs, fSCL = 400 kHz, no load, tr,max = 300 ns | typ 9 uA | 7 |
| Operating mode ICC | VCC = 1.65 V; VI = VCC or GND, IO = 0, I/O = inputs, fSCL = 400 kHz, no load, tr,max = 300 ns | typ 5 uA | 7 |
| Standby mode ICC | VCC = 5.5 V; VI = VCC; I/O = inputs, fSCL = 0 kHz | typ 1.9 · max 3.5 uA | 7 |
| Standby mode ICC | VCC = 3.6 V; VI = VCC; I/O = inputs, fSCL = 0 kHz | typ 1.1 · max 1.8 uA | 7 |
| Standby mode ICC | VCC = 2.7 V; VI = VCC; I/O = inputs, fSCL = 0 kHz | typ 1 · max 1.6 uA | 7 |
| Standby mode ICC | VCC = 1.95 V; VI = VCC; I/O = inputs, fSCL = 0 kHz | typ 0.4 · max 1 uA | 7 |
| Standby mode ICC | VCC = 5.5 V; VI = GND; I/O = inputs, fSCL = 0 kHz | typ 0.45 · max 0.7 mA | 7 |
| Standby mode ICC | VCC = 3.6 V; VI = GND; I/O = inputs, fSCL = 0 kHz | typ 0.3 · max 0.6 mA | 7 |
| Standby mode ICC | VCC = 2.7 V; VI = GND; I/O = inputs, fSCL = 0 kHz | typ 0.23 · max 0.5 mA | 7 |
| Standby mode ICC | VCC = 1.95 V; VI = GND; I/O = inputs, fSCL = 0 kHz | typ 0.23 · max 0.5 mA | 7 |
| SCL Ci | VI = VCC or GND; VCC = 1.65 V to 5.5 V | typ 3 · max 8 pF | 7 |
| SDA Cio | VIO = VCC or GND; VCC = 1.65 V to 5.5 V | typ 5.5 · max 9.5 pF | 7 |
| P port Cio | VIO = VCC or GND; VCC = 1.65 V to 5.5 V | typ 8 · max 9.5 pF | 7 |
| I2C clock frequency fscl | STANDARD MODE | min 0 · max 100 kHz | 8 |
| I2C clock high time tsch | STANDARD MODE | min 4 us | 8 |
| I2C clock low time tscl | STANDARD MODE | min 4.7 us | 8 |
| I2C spike time tsp | STANDARD MODE | max 50 ns | 8 |
| I2C serial-data setup time tsds | STANDARD MODE | min 250 ns | 8 |
| I2C serial-data hold time tsdh | STANDARD MODE | min 0 ns | 8 |
| I2C input rise time ticr | STANDARD MODE | max 1000 ns | 8 |
| I2C input fall time ticf | STANDARD MODE | max 300 ns | 8 |
| I2C output fall time tocf | STANDARD MODE; 10-pF to 400-pF bus | max 300 ns | 8 |
| I2C bus free time between Stop and Start tbuf | STANDARD MODE | min 4.7 us | 8 |
| I2C Start or repeated Start condition setup tsts | STANDARD MODE | min 4.7 us | 8 |
| I2C Start or repeated Start condition hold tsth | STANDARD MODE | min 4 us | 8 |
| I2C Stop condition setup tsps | STANDARD MODE | min 4 us | 8 |
| Valid data time tvd(data) | STANDARD MODE; SCL low to SDA output valid | max 3.45 us | 8 |
| Valid data time of ACK condition tvd(ack) | STANDARD MODE; ACK signal from SCL low to SDA (out) low | max 3.45 us | 8 |
| I2C bus capacitive load Cb | STANDARD MODE | max 400 pF | 8 |
| I2C clock frequency fscl | FAST MODE | min 0 · max 400 kHz | 8 |
| I2C clock high time tsch | FAST MODE | min 0.6 us | 8 |
| I2C clock low time tscl | FAST MODE | min 1.3 us | 8 |
| I2C spike time tsp | FAST MODE | max 50 ns | 8 |
| I2C serial-data setup time tsds | FAST MODE | min 100 ns | 8 |
| I2C serial-data hold time tsdh | FAST MODE | min 0 ns | 8 |
| I2C input rise time ticr | FAST MODE | min 20 · max 300 ns | 8 |
| I2C input fall time ticf | FAST MODE; minimum 20 × (VDD / 5.5 V) | max 300 ns | 8 |
| I2C output fall time tocf | FAST MODE; 10-pF to 400-pF bus; minimum 20 × (VDD / 5.5 V) | max 300 ns | 8 |
| I2C bus free time between Stop and Start tbuf | FAST MODE | min 1.3 us | 8 |
| I2C Start or repeated Start condition setup tsts | FAST MODE | min 0.6 us | 8 |
| I2C Start or repeated Start condition hold tsth | FAST MODE | min 0.6 us | 8 |
| I2C Stop condition setup tsps | FAST MODE | min 0.6 us | 8 |
| Valid data time tvd(data) | FAST MODE | max 0.9 us | 8 |
| Valid data time of ACK condition tvd(ack) | FAST MODE | max 0.9 us | 8 |
| I2C bus capacitive load Cb | FAST MODE | max 400 pF | 8 |
| Interrupt valid time tiv | STANDARD MODE and FAST MODE; P port to INT | max 4 us | 8 |
| Interrupt reset delay time tir | STANDARD MODE and FAST MODE; SCL to INT | max 4 us | 8 |
| Output data valid tpv | STANDARD MODE and FAST MODE; SCL to P7–P0 | max 350 ns | 8 |
| Input data setup time tps | STANDARD MODE and FAST MODE; P port to SCL | min 100 ns | 8 |
| Input data hold time tph | STANDARD MODE and FAST MODE; P port to SCL | min 1 us | 8 |

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure
/2.0/ChannelSelector.kicad_pcb.jpg?size=s&soon)

bobby1321/High-Current-5V-Regulator
High Current 5V DC Buck Converter Board
Yes. The symbol is Interface_Expansion:TCA9554PW and the footprint Package_SO:TSSOP-16_4.4x5mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
TSSOP-16, with 16 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C477924, with 5,673 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the PCA9554PW by NXP Semiconductors, the PCA9557PW by NXP Semiconductors, the TCA9534PW by Texas Instruments and the TCA9534APW by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
11 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.