
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

an electronic wind instrument / clarinet / flute / not sure
Clarinoid devboard is an open-source printed circuit board by thenfour, from the thenfour/Clarinoid repository on GitHub. It is a 2-layer board of 257 × 174 mm with 218 parts on 320 nets, routed with 2,017 tracks and 363 vias.
It is built around the CY8CMBR3108-LQXIT, TLV75733PDBV and PCM5102APW, with the WS2812, 1N4148WS and PTR902-2020K-A103 among its other parts. Its parts include 65 ICs, 33 connectors, 32 capacitors, 25 resistors and 10 diodes. It belongs with the microcontroller boards boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | mb1 | clarinoid2:mouse-bite-2mm-slot | U20, U21, U22, U23, U24, U25, U26, U27, U28, U29, U30, U31, U32, U33, U34, U35 +23 |
| 12 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C6, C13, C14, C23, C24, C25, C26, C27, C28, C31, C32 |
| 10 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H6, H7, H8, H9, H10, H11, H12, H13, H14, H15 |
| 7 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C10, C11, C15, C16 |
| 7 | 470R | Resistor_SMD:R_1206_3216Metric | R5, R6, R22, R34, R35, R36, R37 |
| 6 | 22uF | Capacitor_SMD:C_0805_2012Metric | C17, C18, C19, C20, C21, C22 |
| 4 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C7, C8, C9, C12 |
| 4 | SW_Push | SamacSys_Parts:B3F-4055 | SW2, SW3, SW4, SW5 |
| 4 | female 1x6 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6, J45, J52, J53 |
| 4 | male 1x6 MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J46, J47, J50, J51 |
| 4 | power template | clarinoid2:dev board power board template | U16, U17, U18, U39 |
| 3 | 22R | Resistor_SMD:R_1206_3216Metric | R1, R2, R3 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H2, H3, H5 |
| 3 | captouch board template | clarinoid2:dev board captouch board template | U4, U46, U47 |
| 3 | processor board template | clarinoid2:dev board processor subboard template | U42, U43, U44 |
| 2 | 0.22uF | Capacitor_SMD:C_0805_2012Metric | C2, C30 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric | R14, R15 |
| 2 | 10k | Resistor_SMD:R_1206_3216Metric | R4, R10 |
| 2 | 4.7k | Resistor_SMD:R_1206_3216Metric | R40, R41 |
| 2 | 47R | Resistor_SMD:R_1206_3216Metric | R20, R21 |
| 2 | 4p MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J34, J36 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric | R7, R8 |
| 2 | Conn_01x08 MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J40, J42 |
| 2 | Conn_01x20 MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J39, J41 |
| 2 | SW_Push | clarinoid2:XKB switch jlcpcb SW_TS-1187A-B-A-B | SW1, SW6 |
| 2 | TLV75733PDBV | Package_TO_SOT_SMD:SOT-23-5 | U7, U19 |
| 2 | blue | LED_SMD:LED_0603_1608Metric | D5, D7 |
| 2 | green | LED_SMD:LED_0603_1608Metric | D8, D9 |
| 2 | header_power tap | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J32, J33 |
| 2 | male 1x4 MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J48, J49 |
| 1 | 0.5R | Resistor_SMD:R_1206_3216Metric | R11 |
| 1 | 100% | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D6 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C29 |
| 1 | 1uH | clarinoid2:Inductor_MCS0630-1R0MN2 | L1 |
| 1 | 220R | Resistor_SMD:R_1206_3216Metric | R19 |
| 1 | 25% | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | 2R | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 3.3v | Diode_SMD:D_MiniMELF | D12 |
| 1 | 4p | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J31 |
| 1 | 4p-manual | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J30 |
| 1 | 50% | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm | U8 |
| 1 | 75% | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | 75k | Resistor_SMD:R_1206_3216Metric | R12 |
| 1 | A3v3 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP8 |
| 1 | AGND | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | APCI0108-P001A Teensy_4.0_MicroMod | SamacSys_Parts:21992304 | U40 |
| 1 | AudioOut | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | CY8CMBR3108-LQXIT | SamacSys_Parts:QFN50P300X300X60-17N-D | IC3 |
| 1 | CapTouchSlider_3x3x1 | CapTouchSliders:CaptouchSlider_Masked_H3x3_A1.0mm_x12 | J20 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J44 |
| 1 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J43 |
| 1 | D3v3 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6 |
| 1 | Injoinic IP5306 battery charge | SamacSys_Parts:SOIC127P599X155-9N | IC2 |
| 1 | M.2 riser 2.5mm | clarinoid2:Sinhoo SMTSO2530CTJ | H4 |
| 1 | MIDI IN | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J10 |
| 1 | MIDI OUT | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J11 |
| 1 | MPR121, 0x5A | Package_DFN_QFN:UQFN-20_3x3mm_P0.4mm | U45 |
| 1 | Micromod outline | clarinoid2:Teensy_4.0_MicroMod outline fab | U41 |
| 1 | MountingHole | clarinoid2:MountingHole_3.2mm_M3_Pad_SQUARE | H1 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PCA9554APW,118 | SamacSys_Parts:SOP65P640X110-16N | IC1 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | PTR902-2020K-A103 | SamacSys_Parts:PTR902-2020K-A103 | R13 |
| 1 | Placeholder | clarinoid2:Teensy41_graphic | U6 |
| 1 | RotaryEncoder_Switch_ABC12 | clarinoid2:Bourns_ENC_PEC11R-4215F-S0024 | SW7 |
| 1 | SSD1306 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J12 |
| 1 | Teensy4.1_LEFT | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | U3 |
| 1 | Teensy4.1_RIGHT | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | U2 |
| 1 | WS2812 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | U38 |
| 1 | XKB_U262-16XN-4BVC11 USB-C recept | clarinoid2:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | captouch 3x3x1 header B | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J13 |
| 1 | captouch 3x3x1 headerA | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | captouch3x3x1 graphic | CapTouchSliders:captouch dev board subboard template | U9 |
| 1 | captouch4x4x.5 | CapTouchSliders:CaptouchSlider_Masked_H4x4_A0.5mm_x12 | J23 |
| 1 | captouch4x4x.5 graphic | CapTouchSliders:captouch dev board subboard template | U13 |
| 1 | captouch4x4x.5 header B | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J21 |
| 1 | captouch4x4x.5 headerA | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J19 |
The 193 most common of 218 parts.

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure


thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

rohamid/chroma-pixel-zeta
The minimal configuration of Chroma Pixel board for GUI application

Dschadu/Geistwerk-BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.

xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice

LispEngineer/stm-midi-poc1
MIDI synthesizer built around an STM32 - Proof of Concept #1 (counting from 0)

cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip

It measures 257 × 174 mm and has 2 copper layers, 1.6 mm thick.
218 parts, built around the CY8CMBR3108-LQXIT, TLV75733PDBV, PCM5102APW and WS2812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thenfour/Clarinoid repository on GitHub, at the commit this page was made from: the board is CAD/clarinoid-devboard/clarinoid-devboard-05/clarinoid-devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thenfour before reusing the design.