
Clarinoid devboard
thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

an electronic wind instrument / clarinet / flute / not sure
Clarinoid devboard is an open-source printed circuit board by thenfour, from the thenfour/Clarinoid repository on GitHub. It is a 2-layer board of 125 × 142 mm with 95 parts on 102 nets, routed with 681 tracks and 167 vias.
It is built around the PCM5102APW, TLV75733PDBV and WS2812, with the 1N4148WS and PTR902-2020K-A103 among its other parts. Its parts include 20 connectors, 18 capacitors, 18 resistors, 16 ICs and 5 diodes. It belongs with the microcontroller boards boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 470R | Resistor_SMD:R_1206_3216Metric | R5, R6, R22, R34, R35, R36, R37 |
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C6, C13, C14, C23, C27 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H7, H8, H13, H14, H15 |
| 5 | mb1 | clarinoid2:mouse-bite-2mm-slot | U9, U10, U15, U48, U50 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C5, C10, C11 |
| 4 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C7, C8, C9, C12 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric | C17, C20, C21, C22 |
| 4 | SW_Push | SamacSys_Parts:B3F-4055 | SW2, SW3, SW4, SW5 |
| 4 | female 1x6 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6, J45, J52, J53 |
| 3 | 22R | Resistor_SMD:R_1206_3216Metric | R1, R2, R3 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H2, H3, H5 |
| 3 | power template | clarinoid2:dev board power board template | U16, U17, U18 |
| 2 | 4.7k | Resistor_SMD:R_1206_3216Metric | R40, R41 |
| 2 | 47R | Resistor_SMD:R_1206_3216Metric | R20, R21 |
| 2 | 5.1k | Resistor_SMD:R_1206_3216Metric | R7, R8 |
| 2 | blue | LED_SMD:LED_0603_1608Metric | D5, D7 |
| 2 | green | LED_SMD:LED_0603_1608Metric | D8, D9 |
| 2 | header_power tap | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J32, J33 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D6 |
| 1 | 220R | Resistor_SMD:R_1206_3216Metric | R19 |
| 1 | 4p | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J31 |
| 1 | 4p MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J36 |
| 1 | 4p-manual | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J30 |
| 1 | 6N138 | Package_DIP:DIP-8_W7.62mm | U8 |
| 1 | A3v3 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP8 |
| 1 | AGND | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | AudioOut | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J1 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J44 |
| 1 | Conn_01x20 | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J43 |
| 1 | D3v3 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6 |
| 1 | MIDI IN | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J10 |
| 1 | MIDI OUT | clarinoid2:SWITCHCRAFT_35RAPC4BV4_OvalHoles | J11 |
| 1 | MountingHole | clarinoid2:MountingHole_3.2mm_M3_Pad_SQUARE | H1 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | PCA9554APW,118 | SamacSys_Parts:SOP65P640X110-16N | IC1 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | PTR902-2020K-A103 | SamacSys_Parts:PTR902-2020K-A103 | R13 |
| 1 | RotaryEncoder_Switch_ABC12 | clarinoid2:Bourns_ENC_PEC11R-4215F-S0024 | SW7 |
| 1 | SSD1306 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J12 |
| 1 | TLV75733PDBV | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | WS2812 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | U38 |
| 1 | XKB_U262-16XN-4BVC11 USB-C recept | clarinoid2:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J2 |
| 1 | captouch board template | clarinoid2:dev board captouch board template | U4 |
| 1 | female 1x4 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J8 |
| 1 | header_i2c | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J5 |
| 1 | header_power tap-MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J35 |
| 1 | header_power tap_MANUAL | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J37 |
| 1 | processor board template | clarinoid2:dev board processor subboard template | U44 |
| 1 | ssd1306_graphic | clarinoid2:SSD1306_128x64_approximate | U12 |

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure


thenfour/Clarinoid
an electronic wind instrument / clarinet / flute / not sure

rohamid/chroma-pixel-zeta
The minimal configuration of Chroma Pixel board for GUI application

Dschadu/Geistwerk-BigCore
An ESP32-based open hardware control board designed for Bottango-powered animatronic and motion projects.

xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice

LispEngineer/stm-midi-poc1
MIDI synthesizer built around an STM32 - Proof of Concept #1 (counting from 0)

cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip

It measures 125 × 142 mm and has 2 copper layers, 1.6 mm thick.
95 parts, built around the PCM5102APW, TLV75733PDBV, WS2812 and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the thenfour/Clarinoid repository on GitHub, at the commit this page was made from: the board is CAD/clarinoid-devboard/clarinoid-devboard-06-asmA/clarinoid-devboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask thenfour before reusing the design.