2 layers53.5 × 101.8 mm
Sony scopeman
lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.
135 parts69
2 layers84.6 × 42.3 mm
Clementine clock copy
themagicfrog/clementine-clock1a PCB & 3D-printed clementine-themed clock for alarms & timers
- Size
- 84.6 × 42.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 26
- Pads
- 89
- Tracks, vias
- 124, 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Nov 2025
- Updated
- 3 Dec 2025
Overview
Clementine clock copy is an open-source printed circuit board by themagicfrog, from the themagicfrog/clementine-clock repository on GitHub. It is a 2-layer board of 84.6 × 42.3 mm with 23 parts on 26 nets, routed with 124 tracks and 8 vias.
It is built around the PAM8302AADCR and MIC5219-3.3YM5. Its parts include 6 capacitors, 3 switches, 2 resistors and 1 IC. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
Main components
2README
README.mdclementine clock
this is an orange/mandarin-themed clock to set timers & alarms for my room. I decided to make a clock because I usually don't have access to my phone when I go to sleep at school, and I needed an easy way to know the time and to wake up at the right time. I chose a clementine theme because I like oranges.
on the main PCB board, there is a 4-digit 7-segment LCD display (showing the time), a small button, and a speaker. there is also wires on the main PCB board connecting a rotary encoder (adjusting the time) on the top of the orange, a 3 AA battery case, and a big button (snooze & stop) at the "stem" of the clementine. the case is a 3D-printed cylindrical clementine case.
bill of materials
made for Blueprint
find the Journal (devlogs) and project on Blueprint here
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | , | ||
| 2 | LOGO | Graphics:orange | G***, G*** |
| 1 | 0.22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 10 µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 22µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 4.5V (3xAA) | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BATTERY |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | LCD _Screen | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | DISPLAY |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | PAM8302AAD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | AMPLIFIER |
| 1 | RotaryEncoder_Switch | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | KNOB |
| 1 | SW_Push | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | SW2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_PCM12 | SW4 |
| 1 | Speaker | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | SPEAKER |
| 1 | XIAO-RP2040-DIP | KiCad:XIAO-RP2040-DIP | XIAO RP2040 |
Similar boards
- 2 layers47 × 61.7 mm
Basic emulator
FromDarkHell/EmuToLife
A Raspberry Pi Pico based emulator for toys to life games (LEGO Dimensions)
34 parts11MIT - 4 layers127.5 × 51.5 mm
EMIsniffer
evabits/EMI_sniffer_beursgadget_WOTS_2026
Schematics. Layout and Firmware of the WOTS2026 beursgadget.
174 parts7MIT - 2 layers132 × 100 mm
- 2 layers65 × 67.5 mm
Gb walkie
idlehandsdev/gb_walkie_talkie
An open source "Fake" walkie-talkie for the Fake Ghost Tours for my friends in Vancouver.
75 parts4 - 2 layers48.3 × 22.9 mm
Buddhabox
emeb/RP2040_Projects
A collection of random projects based on the Raspberry Pi RP2040 MCU
51 parts3MIT - 2 layers25.4 × 17.8 mm
CE Makerverse PAM8302-Class D Amplifier
CoreElectronics/CE-Makerverse-PAM8302-Class-D-Amplifier
This is the repo for the Core Electronics Makerverse PAM8302 Class D Amplifier.
27 parts1 - 2 layers108 × 53.1 mm
Questions
How big is the Clementine clock copy PCB?
It measures 84.6 × 42.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clementine clock copy use?
23 parts, built around the PAM8302AADCR and MIC5219-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clementine clock copy KiCad files?
From the themagicfrog/clementine-clock repository on GitHub, at the commit this page was made from: the board is PCB/clementine clock copy.kicad_pcb and its schematic PCB/clementine clock copy.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clementine clock copy design in my own project?
Its repository states no licence, so its author keeps all rights: ask themagicfrog before reusing the design.