
Sony scopeman
lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.

An open source "Fake" walkie-talkie for the Fake Ghost Tours for my friends in Vancouver.
Gb walkie is an open-source printed circuit board by idlehandsdev, from the idlehandsdev/gb_walkie_talkie repository on GitHub. It is a 2-layer board of 65 × 67.5 mm with 75 parts on 100 nets, routed with 786 tracks and 90 vias.
It is built around the PAM8302AADCR. Its parts include 20 capacitors, 20 resistors, 5 ICs, 5 switches and 5 inductors. It belongs with the SAM D and SAM boards of this library.
If you're reading this, it means I have started a new project but have neglected to update the README file. Please notify me of this by any means possible.
Twitter: @idlehandsdev Instagram: @idlehandsdev
Since you're reading this, go check out my YouTube Channel! http://youtube.com/seanhodginsfilms
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100K | Resistor_SMD:R_0805_2012Metric | R2, R8, R9, R10, R11, R13, R17 |
| 7 | 1uF | Capacitor_SMD:C_0805_2012Metric | C2, C9, C10, C12, C14, C19, C20 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric | R12, R15, R18, R19, R20 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C15, C17, C18 |
| 4 | 100R | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R14, R16 |
| 3 | LED | LED_THT:LED_D5.0mm | D1, D2, D3 |
| 3 | RST | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4, JP5, JP7 |
| 2 | 10nF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 220pF | Capacitor_SMD:C_0805_2012Metric | C11, C13 |
| 2 | 220uF | Capacitor_SMD:CP_Elec_5x5.3 | C7, C8 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | AFLTR | Inductor_SMD:L_0805_2012Metric | L1, L2 |
| 2 | SPFLTR | Inductor_SMD:L_0805_2012Metric | L4, L5 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H13mm | SW2, SW3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 12.288MHz | project_footprints:crystal_fa128 | Y1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 1v8EN | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP8 |
| 1 | AP2127K-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | Battery | project_footprints:BatteryHolder_BH3AAPC_3xAA | BT1 |
| 1 | CODECODER-VS1053B(LQFP48) | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | FGPMM0PA6H | project_footprints:FGPMMOPA6H | U4 |
| 1 | GFLTR | Inductor_SMD:L_0805_2012Metric | L3 |
| 1 | HPJACK | project_footprints:Jack_3.5mm_35RASMT4BHNTRX_Horizontal | J2 |
| 1 | LOGO | logos:SH_Logo | G*** |
| 1 | LOGO | logos:GBoys_Logo | G*** |
| 1 | LOGO | logos:GBoys_Logo_words | G*** |
| 1 | LOGO | logos:SH_Logo_cu | G*** |
| 1 | MP3RXSEL | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J3 |
| 1 | PAM8302AAD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | POWER | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW5 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | RESET1 |
| 1 | R_POT | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | RV1 |
| 1 | Rotary_Encoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SAMD21_MOD | project_footprints:SAMD_HCC_G_FOOT | U1 |
| 1 | SW_DIP_x03 | Button_Switch_SMD:SW_DIP_SPSTx03_Slide_6.7x9.18mm_W6.73mm_P2.54mm_LowProfile_JPin | SW6 |
| 1 | Speaker | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type059_RT06302HBWC_1x02_P3.50mm_Horizontal | LS1 |
| 1 | USB_OTG | Connector_USB:USB_Micro-B_Wuerth_614105150721_Vertical | J1 |

lucysrausch/sony-scopeman
Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.

FromDarkHell/EmuToLife
A Raspberry Pi Pico based emulator for toys to life games (LEGO Dimensions)

evabits/EMI_sniffer_beursgadget_WOTS_2026
Schematics. Layout and Firmware of the WOTS2026 beursgadget.


emeb/RP2040_Projects
A collection of random projects based on the Raspberry Pi RP2040 MCU

CoreElectronics/CE-Makerverse-PAM8302-Class-D-Amplifier
This is the repo for the Core Electronics Makerverse PAM8302 Class D Amplifier.


ndesserich/ECE-36200-Final-Project-PCB
A PCB that integrates an RP2350 and various peripherals to play games.
It measures 65 × 67.5 mm and has 2 copper layers, 1.6 mm thick.
75 parts, built around the PAM8302AADCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the idlehandsdev/gb_walkie_talkie repository on GitHub, at the commit this page was made from: the board is PCB/gb_walkie.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask idlehandsdev before reusing the design.