
Fpc
theheraldproject/herald-hardware
Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.
Wearable is an open-source printed circuit board by theheraldproject, from the theheraldproject/herald-hardware repository on GitHub. It is a 4-layer board of 28 × 34.7 mm with 82 parts on 68 nets, routed with 746 tracks and 167 vias.
It is built around the APDS-9250, MAX30102 and TMP1075D, with the DT1446-04V, LIS2DE12 and PCF85063ATL/1 among its other parts. Its parts include 25 capacitors, 12 resistors, 11 ICs, 3 connectors and 2 diodes. It belongs with the wearables and radio and wireless boards of this library.
Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.
This repository aims to provide opensource hardware designs that can be used either as-is or with modification by any Public Health Authority (PHA), NGO working on disease outbreaks, or commercial company.
Several envisaged uses for these hardware designs are possible. The initial design targets include:-
We aim to provide a range of design files in this repository, including:-
Our Main website will contain documentation including quick start guides and application development guides.
Software and sample applications to run on this hardware can be found on the main Herald Proximity project website.
Our main hardware platform are Nordic Semiconductor's nRF52 and 53 series SoCs. In particular the nRF52833 provides a good balance between memory availability and processing power.
We also use Nordic Semiconductor's nRF Connect SDK (NCS), which is based on the Zephyr RTOS, as our target Operating System.
Herald's C++ API and samples are first tested on nRF52832DK, nRF52833DK, nRF52840DK and nRF5340DK, and then tested on the hardware designs in this repository.
We have created some custom Zephyr drivers based on our own sensor needs. We will be contributing these to upstream Zephyr as PRs. This process may take some time. If you cannot compile our demo apps for your device then please visit the Zephyr Devices repository from The Herald Project at the below URL:
https://github.com/theheraldproject/zephyr-devices
This repository is licensed under CERN-OHL-P v2.
More information on this license can be found in LICENSE.txt or at https://ohwr.org/project/cernohl/wikis/Documents/CERN-OHL-version-2
All files in the external/ subdirectory are covered by distribution terms of their respectable owners.
All works are copyright 2021 Herald Project Contributors. See the NOTICE.txt file for details.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C42, C43, C61, C71, C92, C111 |
| 6 | 10uF | Capacitor_SMD:C_0402_1005Metric | C3, C31, C32, C41, C91, C93 |
| 6 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C11, C12, C21, C22, C112 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R21, R41, R51, R61, R62 |
| 4 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3, FID4 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C51, C101, C102 |
| 2 | 120R/0.6A | Inductor_SMD:L_0402_1005Metric | FB1, FB2 |
| 2 | 390pF | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | Extension | Herald_Extras:TE_1-2328724-3_2Rows_13Pins_P0.3mm_Horizontal | J2, J3 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 100nF/100V | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 10M | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C23 |
| 1 | 1V8 | TestPoint:TestPoint_Pad_D1.0mm | TP101 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L31 |
| 1 | 3.9k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y71 |
| 1 | 5.6k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 6.8M | Resistor_SMD:R_0402_1005Metric | R23 |
| 1 | ACCINT1 | TestPoint:TestPoint_Pad_D1.0mm | TP41 |
| 1 | ACCINT2 | TestPoint:TestPoint_Pad_D1.0mm | TP42 |
| 1 | APDS-9250 | OptoDevice:Broadcom_DFN-6_2x2mm_P0.65mm | U5 |
| 1 | BC833 | Herald_Extras:Fanstel_BC833x | U1 |
| 1 | BIOINT | TestPoint:TestPoint_Pad_D1.0mm | TP91 |
| 1 | BTSTAT | TestPoint:TestPoint_Pad_D1.0mm | TP22 |
| 1 | CHSTAT | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | DT1446-04V | Herald_Extras:SOT-563 | U8 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | LED_ARBG | Herald_Extras:LED_Kingbright_APHF1608 | D1 |
| 1 | LIS2DE12 | Package_LGA:LGA-12_2x2mm_P0.5mm | U4 |
| 1 | LiPo | Herald_Extras:Herald_Battery_Solder_Pads | BT1 |
| 1 | MAX30102 | OptoDevice:Maxim_OLGA-14_3.3x5.6mm_P0.8mm | U9 |
| 1 | MCP73832-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MISO | TestPoint:TestPoint_Pad_D1.0mm | TP14 |
| 1 | MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | MX25R8035FZxxx0 | Herald_Extras:USON-8-1EP_2x3mm_P0.5mm_EP0.25x1.65mm | U6 |
| 1 | MountingHole | MountingHole:MountingHole_2mm | H1 |
| 1 | PCF85063ATL | Herald_Extras:DFN-10-1EP_2.6x2.6mm_P0.5mm_EP1.25x2.15mm | U7 |
| 1 | RTCINT | TestPoint:TestPoint_Pad_D1.0mm | TP72 |
| 1 | S-85S1A | Herald_Extras:SNT-6A | U3 |
| 1 | SCL | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | SCLK | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | SDA | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | SWDCLK | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_D1.0mm | TP11 |
| 1 | TCR3UFxxA | Package_TO_SOT_SMD:SOT-23-5 | U10 |
| 1 | TMP1075 | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U11 |
| 1 | TMPINT | TestPoint:TestPoint_Pad_D1.0mm | TP111 |
| 1 | ThPad | TestPoint:TestPoint_Pad_D4.0mm | TP112 |
| 1 | ThermalSlot | Herald_Extras:MillSlot_8.0x1.0mm | H2 |
| 1 | USB_C_Receptacle_USB2.0 | Herald_Extras:USB_C_Receptacle_IPxx | J1 |
| 1 | VBUS | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | VDD | TestPoint:TestPoint_Pad_D1.0mm | TP31 |

theheraldproject/herald-hardware
Permissively licensed opensource hardware designs for Herald powered wearables and beacons. Supports digital contact tracing and other eHealth approaches.

golioth/elixir-hw
An open source hardware device that has cellular, wifi, bluetooth, GPS, and more!




ninjatill/PCB-Capacitive-Touch-Synth
A Raspberry Pi-based synthesizer with capacitive touch keys directly on a PCB.


marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.

It measures 28 × 34.7 mm and has 4 copper layers, 0.8 mm thick.
82 parts, built around the APDS-9250, MAX30102, TMP1075D and DT1446-04V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the theheraldproject/herald-hardware repository on GitHub, at the commit this page was made from: the board is wearable/pcb/wearable.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask theheraldproject before reusing the design.