2 layers100 × 100 mm
TeslaDriver
kavionic/TeslaDriver
Firmware, support software, and CAD files for my tesla coil project.
118 parts2GPL-3.0
2 layers160.5 × 100.6 mm
ADB-3020-CDV
Testato/ADB-3020-CDV5CDV (Community Digital Version) of the switching power supply ADB-3020
- Size
- 160.5 × 100.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 124
- Nets
- 54
- Pads
- 267
- Tracks, vias
- 393, 0
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 27 May 2017
- Updated
- 30 Jan 2018
Overview
ADB-3020-CDV is an open-source printed circuit board by Testato, from the Testato/ADB-3020-CDV repository on GitHub. It is a 2-layer board of 160.5 × 100.6 mm with 124 parts on 54 nets, routed with 393 tracks and 0 vias.
It is built around the LM2576WT, NE5532N and NE555, with the BC337, IRFP4310ZPBF and BDX53 among its other parts. Its parts include 40 resistors, 31 capacitors, 8 connectors, 6 diodes and 5 ICs. It belongs with the power boards of this library.
Main components
6
LM2576WT
TO-220-5-40℃~+125℃@(TJ) 1 1.23V~37V 3A 4V~40V 52kHz Adjustable Buck Buck Built-in No TO-220-5 DC-DC Converters ROHSMicrochip TechnologyDC-DC Converters
NE5532N
DIP-8-22V~22V 0℃~+70℃ 100dB 10MHz 11V/us 2 5.5mA 500nA 5mV 5nA 8nV/√Hz@1kHz DIP-8 Operational Amplifier ROHSHGSEMIOperational Amplifier
NE555
SOP-8-20℃~+70℃ 1 1.5mA 200mA 4.5V~15V Adjustable duty cycle oscillation、Reset function、Duty cycle stabilization SOP-8 555 Timers / Counters ROHSGRTimers / Counters
BC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
IRFP4310ZPBF
TO-247AC-3-55℃~+175℃ 1 N-channel 100V 134A 170nC@10V 220pF 280W 490pF 4V 6.86nF 6mΩ@10V N-Channel TO-247AC-3 MOSFETs ROHSInfineon TechnologiesMOSFETs
BDX53
TO-220C-65℃~+150℃ 2.5V 200uA 2V 5V 60W 750 80V 8A NPN TO-220C Darlington Transistors ROHSSPTECHDarlington Transistors
README
README.mdADB-3020-CDV
The ADB-3020 is an excellent switching power supply designed by an Italian team and licensed under Creative Commons (the original project and credits are in the adb_2030_Original subfolder).
The CDV (Community Digital Version) fork is intended to start with version 2.1 (last published on the fork date) and then extend it with digital functions via MCU. The project started with the creation of Eagle .sch because the original authors have decided not to release the productions files. Now Eagle file is deprecated, the project is ported on KiCAD.
The CDV version is released under the same license as the original project:
Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitors_SMD:C_0805 | C4, C5, C6, C7, C8, C12, C38, C39 |
| 6 | 1k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R7, R12, R16, R34, R39 |
| 6 | MountingHole_3.2mm_M3 | Mounting_Holes:MountingHole_3.2mm_M3 | M3, M3, M3, M3, M3, M3 |
| 5 | 100n | Capacitors_SMD:C_1206 | C22, C23, C27, C31, C32 |
| 4 | 10n | Capacitors_SMD:C_1206 | C20, C21, C26, C28 |
| 4 | 22k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R8, R29, R30 |
| 4 | TEST_1P | Wire_Pads:SolderWirePad_single_1mmDrill | PAD1, PAD2, PAD3, PAD4 |
| 3 | 10n | Capacitors_SMD:C_0805 | C2, C11, C35 |
| 3 | 1N4148 | Diodes_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2, D3 |
| 3 | 4.7k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R11, R31 |
| 2 | + IN | customparts:faston_6.3mm | J1, J5 |
| 2 | + OUT | customparts:faston_6.3mm | J3, J7 |
| 2 | - IN | customparts:faston_6.3mm | J2, J6 |
| 2 | - OUT | customparts:faston_6.3mm | J4, J8 |
| 2 | 10000u | Capacitors_THT:CP_Radial_D30.0mm_P10.00mm_SnapIn | C16, C17 |
| 2 | 1000u | Capacitors_THT:CP_Radial_D16.0mm_P7.50mm | C19, C25 |
| 2 | 100u | Capacitors_THT:CP_Radial_D6.3mm_P2.50mm | C36, C37 |
| 2 | 10k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R17, R28 |
| 2 | 10k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R13 |
| 2 | 10m | Resistors_SMD:R_2512 | R26, R27 |
| 2 | 1N4148 | Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D4, D5 |
| 2 | 1k | Potentiometers:Potentiometer_Trimmer_Bourns_3296Y | R19, R35 |
| 2 | 30k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5, R10 |
| 2 | 4.7k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R22, R23 |
| 2 | 470u | Capacitors_THT:CP_Radial_D10.0mm_P5.00mm | C1, C3 |
| 2 | BC337 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | T1, T2 |
| 2 | IRFP4310ZPBF | TO_SOT_Packages_THT:TO-247_TO-3P_Horizontal | Q1, Q2 |
| 2 | TEST | Wire_Pads:SolderWirePad_single_1mmDrill | TP1, TP2 |
| 1 | 100 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R20 |
| 1 | 100u | customparts:biginductor | L4 |
| 1 | 10k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R33 |
| 1 | 10k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 1 | 11k | Potentiometers:Potentiometer_Trimmer_ACP_CA9v_Horizontal_Px10.0mm_Py5.0mm | R36 |
| 1 | 12V AC | Connectors_Phoenix:PhoenixContact_MCV-G_02x5.08mm_Vertical | LOGIC_POWER41 |
| 1 | 15k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R25 |
| 1 | 1M | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R18 |
| 1 | 1N4148 | Diodes_THT:D_DO-35_SOD27_P12.70mm_Horizontal | D6 |
| 1 | 1k | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R38 |
| 1 | 1k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 1 | 1k | Resistors_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R40 |
| 1 | 2.2k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R14 |
| 1 | 220 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R21 |
| 1 | 2200u | Capacitors_THT:CP_Radial_D18.0mm_P7.50mm | C18 |
| 1 | 22k | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R15 |
| 1 | 4.7u | Capacitors_THT:CP_Radial_D5.0mm_P2.00mm | C9 |
| 1 | 470n | Capacitors_SMD:C_0805 | C15 |
| 1 | 560 | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R32 |
| 1 | 6.8 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R24 |
| 1 | 6.8u | customparts:smallinductor | L3 |
| 1 | 60k | Potentiometers:Potentiometer_Trimmer_ACP_CA9v_Horizontal_Px10.0mm_Py5.0mm | R37 |
| 1 | 7812T | TO_SOT_Packages_THT:TO-220_Vertical | IC1 |
| 1 | BDX53 | TO_SOT_Packages_THT:TO-126_Vertical | Q4 |
| 1 | CC Reset | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | RESET41 |
| 1 | CC_reset | Buttons_Switches_THT:SW_PUSH_6mm | S1 |
| 1 | D_Bridge_+A-A | Diodes_THT:Diode_Bridge_Round_D9.8mm | B1 |
| 1 | IR2184D | Housings_DIP:DIP-8_W7.62mm_LongPads | IC5 |
| 1 | LM2576 | TO_SOT_Packages_THT:TO-220-5_Pentawatt_Multiwatt-5_Vertical_StaggeredType1 | IC3 |
| 1 | LOGO | customparts:bunny | G*** |
| 1 | LOGO | customparts:t_logo | G*** |
| 1 | LOGO | customparts:5N_logo | G*** |
| 1 | NE5532N | Housings_DIP:DIP-8_W7.62mm_LongPads | IC2 |
| 1 | NE555 | Housings_DIP:DIP-8_W7.62mm_LongPads | IC4 |
| 1 | PTCPTH | Resistors_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | F1 |
| 1 | V-A Meter supply | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | V-A_METER_SUPPLY41 |
| 1 | blue | LEDs:LED_D3.0mm | ON1 |
| 1 | fan | Connectors_Phoenix:PhoenixContact_MCV-G_02x5.08mm_Vertical | FAN1 |
| 1 | green | LEDs:LED_D3.0mm | HEAT1 |
| 1 | jp1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | red | LEDs:LED_D3.0mm | FAULT1 |
| 1 | yellow | LEDs:LED_D3.0mm | LIMITER1 |
Similar boards
- 2 layers124.5 × 125.3 mm
MegaGRRLDesktop
denjhang/MegaGRRL-Desktop-Mini-USB
I have been using the desktop version of MegaGRRL for 4 years. As my PCB drawing skills improve, I have the confidence to realize all my ideas and changes.
133 parts3MIT - 2 layers70 × 70 mm
- 2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers37.1 × 24.1 mm
- 2 layers80.8 × 55.4 mm
- 2 layers129 × 66 mm
DC22-PCB1
Le-Dome-RDS/hope-bike
An open source Pedalling Assistant Sytem for 26" wheeled bikes
92 parts8 - 4 layers143 × 55 mm
Questions
How big is the ADB-3020-CDV PCB?
It measures 160.5 × 100.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ADB-3020-CDV use?
124 parts, built around the LM2576WT, NE5532N, NE555 and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ADB-3020-CDV KiCad files?
From the Testato/ADB-3020-CDV repository on GitHub, at the commit this page was made from: the board is KiCAD_files/ADB-3020-CDV.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ADB-3020-CDV design in my own project?
Its repository states no licence, so its author keeps all rights: ask Testato before reusing the design.