2 layers65 × 22 mm
Propellor pitch bluetooth
hpvdt/falcon_propellor_controller
Firmware for propellor control board
54 parts
4 layers58.4 × 68.6 mm
Tessel v2
tessel/t2-hardware29Tessel 2 KiCad design files
- Size
- 58.4 × 68.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 315
- Nets
- 253
- Pads
- 1,074
- Tracks, vias
- 5,637, 688
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Dec 2014
- Updated
- 18 Feb 2016
Overview
Tessel v2 is an open-source printed circuit board by tessel, from the tessel/t2-hardware repository on GitHub. It is a 4-layer board of 58.4 × 68.6 mm with 315 parts on 253 nets, routed with 5,637 tracks and 688 vias.
It is built around the FE1.1, S25FL256SAGNFI001 and MT9700, with the 2450BL15B100E, BLM21PG221SN1D and DMG2305UX among its other parts. Its parts include 136 capacitors, 85 resistors, 24 diodes, 14 connectors and 13 inductors. It belongs with the SAM D and SAM boards of this library.
Main components
9
FE1.1
LQFP-48(7x7)115mA 4 5V Controller USB 2.0 LQFP-48(7x7) USB Converters ROHSTERMINUSUSB Converters
S25FL256SAGNFI001
WSON-8-EP(6x8)-40℃~+85℃ 100,000 cycles 130ms@(64KB) 133MHz 2.7V~3.6V 20 Years 256Mbit 340us 70uA SPI WSON-8-EP(6x8) NOR FLASH ROHSInfineon TechnologiesNOR FLASH
MT9700
SOT-23-5-40℃~+85℃ 1 2.4V~5.5V 2A 80mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-5 Power Distribution Switches ROHS西安航天民芯Power Distribution Switches2450BL15B100E
0805-40℃~+85℃ 0.85mm 1.25mm 180°@±10° 1dB 2.4GHz~2.5GHz 2dB 2mm 50Ω:100Ω 9.5dB 0805 Balun ROHSJohanson DielectricsBalun
BLM21PG221SN1D
08051 220Ω@100MHz 2A 45mΩ ±25% 0805 Ferrite Beads ROHSMurataFerrite Beads
DMG2305UX
SOT-23-55℃~+150℃ 1 P-Channel 1.7W 190pF 1V 20V 4.1A 52mΩ@4.5V 7.8nC 740pF P-Channel SOT-23 MOSFETs ROHSTECH PUBLICMOSFETs
FC-135
UncategorisedUnknown maker
HR911105A
插件0℃~+70℃ 1 Filtered Gold Non-PoE Phosphor bronze RJ45 Jack Right Angle Shielded With LED 插件 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSHANRUNEthernet Connectors / Modular Connectors (RJ45 RJ11)MMSS8550-H
SOT-23SOT-23 Bipolar (BJT) ROHSFUXINSEMIBipolar (BJT)
README
README.mdt2-hardware
KiCAD design files for the Tessel 2
To download TM's KiCAD library, containing all the schematic symbols and footprints, run this command:
git submodule update --initNotes
- We use the daily builds of KiCAD (for Ubuntu and OS X) and you should too!
- As a general rule, do not assume that schematic, layout, and manufacturing exports were kept abreast on each commit. Do a fresh export (or use tagged releases) if you intend to actually send off gerbers.
Troubleshooting
No components rendered in 3D viewer (OS X): You may need to change the environment variable for the 3D model path. Run this command and reset KiCad; this fix will work for the duration of your logged in session on the computer:
launchctl setenv KISYS3DMOD "/Library/Application Support/kicad/packages3d"License
CC-BY-SA and/or Solderpad at your option except where otherwise noted.
See license.txt.
Parts
315| Qty | Value | Footprint | References |
|---|---|---|---|
| 53 | 100nF | tm-kicad-lib:SMD-0402-C | C205, C206, C211, C216, C218, C219, C221, C222, C223, C225, C228, C229, C232, C233, C234, C235 +37 |
| 22 | 10uF | tm-kicad-lib:SMD-0805-C | C231, C301, C304, C305, C306, C309, C310, C311, C315, C316, C320, C321, C323, C408, C409, C412 +6 |
| 14 | 22R | tm-kicad-lib:SMD-0402-R | R202, R404, R405, R407, R408, R409, R410, R411, R412, R413, R414, R503, R504, R716 |
| 11 | 1uF | tm-kicad-lib:SMD-0402-C | C201, C208, C209, C220, C230, C238, C325, C329, C406, C908, C919 |
| 11 | 4.7kR | tm-kicad-lib:SMD-0402-R | R201, R203, R417, R418, R419, R420, R601, R603, R720, R801, R802 |
| 9 | 100kR | tm-kicad-lib:SMD-0402-R | R314, R315, R401, R604, R712, R718, R721, R901, R903 |
| 9 | CV0402VT6030T | tm-kicad-lib:SMD-0402-R | D401, D403, D404, D901, D902, D903, D904, D905, D906 |
| 8 | 100pF | tm-kicad-lib:SMD-0402-C | C401, C601, C606, C607, C608, C609, C703, C903 |
| 8 | 10kR | tm-kicad-lib:SMD-0402-R | R309, R310, R311, R406, R416, R421, R904, R908 |
| 8 | CV0402VT6001T | tm-kicad-lib:SMD-0402-R | D705, D706, D707, D708, D709, D710, D711, D712 |
| 7 | 10uF DNP | tm-kicad-lib:SMD-0805-C | C215, C217, C224, C226, C308, C324, C327 |
| 6 | 10nF | tm-kicad-lib:SMD-0402-C | C213, C302, C313, C317, C501, C506 |
| 6 | 4.7uF | tm-kicad-lib:SMD-0603-C | C207, C210, C227, C303, C314, C319 |
| 6 | TP | tm-kicad-lib:Testpoint | TP301, TP302, TP401, TP402, TP403, TP404 |
| 6 | fiducial | tm-kicad-lib:fiducial | F101, F102, F103, F104, F105, F106 |
| 5 | 10pF | tm-kicad-lib:SMD-0402-C | C202, C203, C204, C402, C404 |
| 5 | 330R | tm-kicad-lib:SMD-0402-R | R402, R403, R713, R714, R715 |
| 4 | 1.8pF | tm-kicad-lib:SMD-0402-C | C612, C613, C616, C617 |
| 4 | 10kR DNP | tm-kicad-lib:SMD-0603-R | R701, R702, R703, R704 |
| 4 | 120R | tm-kicad-lib:SMD-0402-R | R305, R306, R505, R722 |
| 4 | 18pF | tm-kicad-lib:SMD-0402-C | C212, C214, C907, C909 |
| 4 | 2.2pF | tm-kicad-lib:SMD-0402-C | C602, C603, C604, C605 |
| 4 | 3nH | tm-kicad-lib:SMD-0402-R | L601, L602, L603, L604 |
| 4 | 49.9R 1% | tm-kicad-lib:SMD-0402-R | R705, R706, R707, R708 |
| 4 | HOLE | Mounting_Holes:MountingHole_2-5mm | H101, H102, H103, H104 |
| 3 | 1kR | tm-kicad-lib:SMD-0402-R | R415, R717, R719 |
| 3 | CONN_01X01 | tm-kicad-lib:Testpoint | J601, J602, J701 |
| 3 | GREEN | LEDs:LED-0603 | D301, D302, D704 |
| 3 | MT9700 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U301, U302, U304 |
| 2 | 0.8pF | tm-kicad-lib:SMD-0402-C | C610, C611 |
| 2 | 0R DNP | tm-kicad-lib:SMD-0603-R | R902, R905 |
| 2 | 0R DNP | tm-kicad-lib:SMD-0402-R | R909, R910 |
| 2 | 100kR 1% | tm-kicad-lib:SMD-0402-R | R308, R313 |
| 2 | 100kR DNP | tm-kicad-lib:SMD-0603-R | R709, R710 |
| 2 | 100kR DNP | tm-kicad-lib:SMD-0402-R | R301, R302 |
| 2 | 100pF DNP | tm-kicad-lib:SMD-0402-C | C614, C615 |
| 2 | 2.2uH | tm-kicad-lib:SWPA5020S | L301, L303 |
| 2 | 2.4nH | tm-kicad-lib:SMD-0402-R | L605, L606 |
| 2 | 2450BL15B100 | tm-kicad-lib:EIA-0805 | T601, T602 |
| 2 | 27kR | tm-kicad-lib:SMD-0402-R | R303, R304 |
| 2 | 3.9nH | tm-kicad-lib:SMD-0402-R | L201, L202 |
| 2 | 4.7kR 1% | tm-kicad-lib:SMD-0402-R | R501, R502 |
| 2 | 450kR | tm-kicad-lib:SMD-0402-R | R911, R912 |
| 2 | 5pF | tm-kicad-lib:SMD-0402-C | C513, C514 |
| 2 | ANTENNA | tm-kicad-lib:2.4GHz-INVERTED-F-ANTENNA | AE601, AE602 |
| 2 | AP3418 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23-5 | U303, U305 |
| 2 | BLM21PG221SN1D | tm-kicad-lib:SMD-0805-R | L901, L902 |
| 2 | BLUE | LEDs:LED-0603 | D402, D703 |
| 2 | CONN_02X05 DNP | tm-kicad-lib:CONN_02x05_0.05in | J201, J401 |
| 2 | MODULE_HEADER | tm-kicad-lib:MODULE_HEADER_TESSEL-backside | J403, J404 |
| 2 | UFL DNP | tm-kicad-lib:1909763-1 | J603, J604 |
| 1 | 10uH | tm-kicad-lib:SMD-0603-R | L401 |
| 1 | 12MHz | tm-kicad-lib:Seeed-xtal-12MHz | X901 |
| 1 | 2.7kR 1% | tm-kicad-lib:SMD-0402-R | R907 |
| 1 | 200kR 1% | tm-kicad-lib:SMD-0402-R | R312 |
| 1 | 20MHz | tm-kicad-lib:CTS-425 | X201 |
| 1 | 24kR 1% | tm-kicad-lib:SMD-0402-R | R605 |
| 1 | 4.7kR DNP | tm-kicad-lib:SMD-0402-R | R602 |
| 1 | 450kR 1% | tm-kicad-lib:SMD-0402-R | R307 |
| 1 | 6.19kR 1% | tm-kicad-lib:SMD-0402-R | R711 |
| 1 | 8.2kR 1% | tm-kicad-lib:SMD-0402-R | R906 |
| 1 | AIC1528-0PSTR | tm-kicad-lib:SOP-8 | U901 |
| 1 | AMBER | LEDs:LED-0603 | D701 |
| 1 | CONN_01X03 DNP | Pin_Headers:Pin_Header_Straight_1x03 | J301 |
| 1 | CONN_01X04 DNP | Pin_Headers:Pin_Header_Straight_1x04 | J704 |
| 1 | CONN_01X08 DNP | tm-kicad-lib:CONN_01x08_0.05in | J703 |
| 1 | DMG2305UX | Housings_SOT-23_SOT-143_TSOT-6:SOT-23 | Q302 |
| 1 | FC-135 | tm-kicad-lib:FC-135 | X401 |
| 1 | FE1.1 | tm-kicad-lib:CY7C65634-48AXCT | U902 |
| 1 | HR911105A | tm-kicad-lib:RB1-125BAG1A | J702 |
| 1 | MICROUSB-TH | tm-kicad-lib:Seeed-USB-Micro-320010028 | J402 |
| 1 | MMSS8550 | Housings_SOT-23_SOT-143_TSOT-6:SOT23 | Q301 |
| 1 | MT7620N | tm-kicad-lib:MT7620N | U201 |
| 1 | OSHW logo | tm-kicad-lib:OSHW-Silk | SILK102 |
| 1 | RED | LEDs:LED-0603 | D702 |
| 1 | S25FL256SAGNFI001 | tm-kicad-lib:WNG008 | U801 |
| 1 | SAMD21G17A-MU | tm-kicad-lib:QFN-48-1EP-7mm | U401 |
| 1 | SW_PUSH | tm-kicad-lib:TL1015AF160QG | SW401 |
| 1 | Tessel 2 logo | tm-kicad-lib:TESSEL-TEXT-LOGO-31.8mm8.1mm | SILK101 |
| 1 | Tessel logo | tm-kicad-lib:LOGO-FCC-5mm | SILK105 |
The 311 most common of 315 parts.
Questions
How big is the Tessel v2 PCB?
It measures 58.4 × 68.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Tessel v2 use?
315 parts, built around the FE1.1, S25FL256SAGNFI001, MT9700 and 2450BL15B100E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tessel v2 KiCad files?
From the tessel/t2-hardware repository on GitHub, at the commit this page was made from: the board is tessel-v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tessel v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask tessel before reusing the design.
Similar boards
- 2 layers40.3 × 15.8 mm
- 8 layers120 × 60 mm
DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
299 parts75MIT - 4 layers100 × 115.2 mm
- 8 layers110.3 × 59.1 mm
DFTBoard
SunnyYoshimitsu/CelestiCall
An attempt at making a somewhat modern smartphone with many functions.
313 parts1 - 8 layers120 × 65.6 mm
- 6 layers80 × 70 mm
IMX6 Demo Board from REF
ts-manuel/iMX6-Demo-Board
Demo board for the i.MX6ULL Single-Core Processor with Arm Cortex-A7 Core
504 parts10GPL-3.0 - 2 layers104 × 29.2 mm
