Skip to the content
PCBKitNew board
FC-135 on a board, in 3D

FC-135

Unknown maker

unknown/FC-135
Category
Uncategorised
Pins
2

Overview

The FC-135 is an uncategorised made by Unknown maker with 2 pins.

PCBKit's library has its KiCad symbol (OPL_Crystal_Oscillator:SMD-CRYSTAL-ABS07-32.768KHZ-7PF-20PPM-70K(2P-3.2X1.5MM), from Eagle libraries) and its footprint (OPL_Crystal_Oscillator:X2-SMD-3.2X1.5X0.55MM, from Eagle libraries), ready for a KiCad board. 7 open-source boards in 7 repositories on GitHub use it.

Symbol

1221
OPL_Crystal_Oscillator:SMD-CRYSTAL-ABS07-32.768KHZ-7PF-20PPM-70K(2P-3.2X1.5MM)From Eagle libraries

Footprint

12
OPL_Crystal_Oscillator:X2-SMD-3.2X1.5X0.55MMFrom Eagle libraries

Pinout

2
The pins of the FC-135
PinNameType
11Passive
22Passive

Open-source boards using it

All 7
  • 2 layers101.8 × 57.8 mmSc64v2, the printed circuit board in 3D

    Sc64v2

    Polprzewodnikowy/SummerCart64

    SummerCart64 - a fully open source N64 flashcart

    96 parts1.2kGPL-3.0
  • 4 layers58.4 × 68.6 mmTessel v2, the printed circuit board in 3D

    Tessel v2

    tessel/t2-hardware

    Tessel 2 KiCad design files

    315 parts29
  • 2 layers38.1 × 220.3 mmWifi voice clock v3, the printed circuit board in 3D

    Wifi voice clock v3

    ktmizugaki/wifi-voice-clock

    ESP32 Small Alarm Clock

    78 parts1
  • 4 layers118.6 × 108.9 mmSingle board, the printed circuit board in 3D

    Single board

    ChenSiyun1234/Rover_Contest-Electrical_Subteam

    Motor Controller PCB

    121 parts
  • 4 layers18 × 50 mmSTM32H503CBT6, the printed circuit board in 3D

    STM32H503CBT6

    r-pv/STM32H503CBT6

    ST development board based on the STM32H503CBT6 MCU. Compatible with Arduino.

    37 partsGPL-3.0
  • 2 layers104.5 × 67 mmEsp32 smart clock, the printed circuit board in 3D

    Esp32 smart clock

    rokube015/esp32_smart-clock

    This repository provides firmware and PCB design for a clock with environmental monitoring project using the ESP-IDF framework.

    68 partsApache-2.0
  • 2 layers86.4 × 94 mmT2-hw test rig, the printed circuit board in 3D

    T2-hw test rig

    tessel/t2-test-rig-hw

    KiCAD design files for test rigs for Technical Machine's Tessel 2

    157 parts

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/unknown/FC-135" title="FC-135 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/unknown/FC-135.jpg" alt="FC-135" width="1200" height="900">
A picture that opens the part, for a README
[![FC-135](https://pcbkit.io/embed/parts/unknown/FC-135.jpg?size=s)](https://pcbkit.io/parts/unknown/FC-135)

Questions

Is there a KiCad symbol and footprint for the FC-135?

Yes. The symbol is OPL_Crystal_Oscillator:SMD-CRYSTAL-ABS07-32.768KHZ-7PF-20PPM-70K(2P-3.2X1.5MM) and the footprint OPL_Crystal_Oscillator:X2-SMD-3.2X1.5X0.55MM, both drawn on this page. PCBKit places them on a board for you when you design with it.

What can replace the FC-135?

Parts like it in the library: the FC-135R32.7680KA-AC3 by Seiko Epson. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the FC-135?

7 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

1