

Spar sensor
General purpose modules for handling wing duties
- Size
- 40.3 × 15.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 39
- Pads
- 124
- Tracks, vias
- 155, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Aug 2025
- Updated
- 26 Oct 2025
Overview
Spar sensor is an open-source printed circuit board by hpvdt, from the hpvdt/falcon_wing_module repository on GitHub. It is a 2-layer board of 40.3 × 15.8 mm with 34 parts on 39 nets, routed with 155 tracks and 8 vias.
It is built around the HX711, 2N7002KQ-7-ES and MMSS8550-H. Its parts include 11 resistors, 7 capacitors, 6 connectors, 2 ICs and 2 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
3HX711
SOP-16-40℃~+85℃ 1.4mA 10Hz、80Hz 1MHz~20MHz、11.0592MHz 2 2.6V~5.5V 20mV、40mV、80mV 24 Built-in External、Built-in SPI Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSAvia SemiconAnalog To Digital Converters (ADC)2N7002KQ-7-ES
SOT-23-55℃~+150℃ 1 N-channel 1.6V 1.85Ω@10V、2.05Ω@4.5V 1.8nC@4.5V 11pF 28pF 300mA 350mW 4pF 60V N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETsMMSS8550-H
SOT-23SOT-23 Bipolar (BJT) ROHSFUXINSEMIBipolar (BJT)
README
README.mdfalcon_wing_module
General purpose modules for handling wing duties
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C7 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7 |
| 4 | ADD | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 100 | Resistor_SMD:R_0402_1005Metric | R2, R3, R9 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 510 | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 5k6 | Resistor_SMD:R_0402_1005Metric | R1, R8 |
| 2 | Conn_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J2, J3 |
| 1 | 2N7002KQ-7 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ATtiny1616-MNR | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U1 |
| 1 | AVR-UPDI-6 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | HX711 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | MMSS8550 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | ORNG | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | STRAIN | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J6 |
| 1 | TORSION | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J4 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
More from hpvdt/falcon_wing_module
3- 4 layers50 × 21 mm

- 2 layers55 × 56 mm

- 2 layers17 × 15.6 mm

Similar boards
- 2 layers65 × 22 mm

Propellor pitch bluetooth
hpvdt/falcon_propellor_controller
Firmware for propellor control board
54 parts - 4 layers58.4 × 68.6 mm

- 4 layers27.2 × 32 mm

DSpico
GerardGascon/fanzine-ds-hardware
This repository is based on LNH-team's DSpico Hardware repository. It removes the microSD card slot and microUSB port from the cartridge in order to make it be a potential reprogramable board for the NDS.
33 parts - 4 layers100 × 176.5 mm

Elevation Pivot Daughter Board
mauro-starspec/Elevation_Pivot_Daughter-Board
KiCad 9 daughter board for the Starspec elevation/pivot controller.
263 parts - 2 layers15.3 × 19.3 mm

Kicad hx711 tyny85
IvDm/Z-probe-on-smd-resistors-2512
Auto bed level strain gage for 3D printer using resistors 2512 instead of strain gauges.
18 parts150GPL-3.0 - 2 layers109.2 × 74.9 mm

- 4 layers81.2 × 81.2 mm

- 2 layers128 × 77 mm

Questions
How big is the Spar sensor PCB?
It measures 40.3 × 15.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Spar sensor use?
34 parts, built around the HX711, 2N7002KQ-7-ES and MMSS8550-H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Spar sensor KiCad files?
From the hpvdt/falcon_wing_module repository on GitHub, at the commit this page was made from: the board is hardware/spar_sensor/spar_sensor.kicad_pcb and its schematic hardware/indicator_rev_2/indicator_rev_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Spar sensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask hpvdt before reusing the design.