Skip to the content
4 layers27.2 × 32 mmDSpico, the printed circuit board in 3D

This repository is based on LNH-team's DSpico Hardware repository. It removes the microSD card slot and microUSB port from the cartridge in order to make it be a potential reprogramable board for the NDS.

Size
27.2 × 32 mm
Copper layers
4
Thickness
0.79 mm
Parts
33
Nets
55
Pads
151
Tracks, vias
420, 93
Pours
91
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
11 Jul 2026
Updated
11 Jul 2026

Overview

DSpico is an open-source printed circuit board by GerardGascon, from the GerardGascon/fanzine-ds-hardware repository on GitHub. It is a 4-layer board of 27.2 × 32 mm with 33 parts on 55 nets, routed with 420 tracks and 93 vias.

It is built around the RP2040, W25Q16JVUXIQ and AP2112K-3.3TRG1, with the SI2307CDS-T1-E3, 2N7002KQ-7-ES and XYDBPCNANF-12MHZ among its other parts. Its parts include 15 capacitors, 7 resistors, 3 ICs, 3 transistors and 2 connectors. It belongs with the RP2040 and PIC boards of this library.

Main components

6

README

README.md

Fanzine DS Hardware

This repository is based on LNH-team's DSpico Hardware repository. It removes the microSD card slot and microUSB port from the cartridge in order to make it be a potential reprogramable board for the NDS.

[!WARNING] There's an issue with this version where the PCB doesn't fit an original shell, as this model lacks the two holes in the middle as well as being slightly taller than an original PCB.

ds-cart comparison

Parts

33
QtyValueFootprintReferences
8100NFPCBLIB:C0402C4, C5, C6, C7, C8, C10, C11, C15
41uFPCBLIB:C0402C1, C2, C3, C9
2100KPCBLIB:R0402R1, R2
212PFPCBLIB:C0402C12, C13
21KPCBLIB:R0402R14, R15
2RC0402FR-0727RLPCBLIB:R0402R10, R11
2SI2307CDS-T1-E3PCBLIB:SOT-23_L2.9-W1.3-P1.90-LS2.4-BRQ1, Q2
110KPCBLIB:R0402R3
12.2uFPCBLIB:C0402C14
12N7002KQ-7PCBLIB:SOT-23_L2.9-W1.3-P1.90-LS2.4-BRQ3
1AP2112K-3.3TRG1PCBLIB:SOT95P285X140-5NU1
1LOGOPCBLIB:LogoG***
1NDS_CARDAPCBLIB:NDS_CARDJ3
1PROGRAM-PADPCBLIB:PROGRAM-PADJ1
1RP2040PCBLIB:QFN40P700X700X90-57NU2
1W25Q16JVUXIQPCBLIB:SON50P300X200X60-9NU3
1XYDBPCNANF-12MHZPCBLIB:OSC-SMD_4P-L2.5-W2.0-BLX1
1~PCBLIB:BOOTSELS2

Similar boards

  • 2 layers83.5 × 66 mmOpen ed Rev.B, the printed circuit board in 3D

    Open ed Rev.B

    krikzz/open-ed

    Open-ED is a very simple and cheap open source Genesis/Megadrive cartridge. The cartridge does not have its own processor or FPGA, it is built in the old school style using only memory and discrete logic.

    82 parts169MIT
  • 6 layers69 × 54 mmOpen control board, the printed circuit board in 3D

    Open control board

    variegated-coffee/all-purpose-espresso-controller

    Espresso electronics are usually proprietary affairs with little to no expandability. The purpose of this project is to give everyone an open source alternative with lots of features and flexibility.

    201 parts14CERN-OHL-P-2.0
  • 4 layers100 × 176.5 mmElevation Pivot Daughter Board, the printed circuit board in 3D

    Elevation Pivot Daughter Board

    mauro-starspec/Elevation_Pivot_Daughter-Board

    KiCad 9 daughter board for the Starspec elevation/pivot controller.

    263 parts
  • 2 layers40.3 × 15.8 mmSpar sensor, the printed circuit board in 3D

    Spar sensor

    hpvdt/falcon_wing_module

    General purpose modules for handling wing duties

    34 parts
  • 2 layers45.6 × 82.1 mmQingpi, the printed circuit board in 3D

    Qingpi

    u1f992/qingpi

    Qingpi aka NeoCtrlMod is a project for externally controlling the Nintendo 3DS.

    53 parts11GPL-3.0
  • 2 layers39.5 × 64.7 mmTesty, the printed circuit board in 3D

    Testy

    mmalex/wookash_thing

    a small rp2040 based thing for a livestream with wookash

    65 parts10MIT
  • 6 layers42.2 × 17.8 mmPicoROM, the printed circuit board in 3D

    PicoROM

    wickerwaka/PicoROM

    An RP2040-based ROM emulator

    56 parts336MIT
  • 2 layers48 × 44 mmSpacing drc, the printed circuit board in 3D

    Spacing drc

    ihsinoky/he-piantor-42

    42-key Hall-effect keyboard targeting a unified reverse-V assembly. D-015 defines reusable Main + Left/Right Wings; future Wing geometry must be project-owned or explicitly approved.

    49 parts

Questions

How big is the DSpico PCB?

It measures 27.2 × 32 mm and has 4 copper layers, 0.79 mm thick.

What parts does the DSpico use?

33 parts, built around the RP2040, W25Q16JVUXIQ, AP2112K-3.3TRG1 and SI2307CDS-T1-E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DSpico KiCad files?

From the GerardGascon/fanzine-ds-hardware repository on GitHub, at the commit this page was made from: the board is DSpico.kicad_pcb and its schematic DSpico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DSpico design in my own project?

Its repository states no licence, so its author keeps all rights: ask GerardGascon before reusing the design.