2 layers40.3 × 15.8 mm
4 layers50 × 21 mm
Wing module rev 1
hpvdt/falcon_wing_moduleGeneral purpose modules for handling wing duties
- Size
- 50 × 21 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 64
- Nets
- 59
- Pads
- 240
- Tracks, vias
- 378, 86
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Aug 2025
- Updated
- 26 Oct 2025
Overview
Wing module rev 1 is an open-source printed circuit board by hpvdt, from the hpvdt/falcon_wing_module repository on GitHub. It is a 4-layer board of 50 × 21 mm with 64 parts on 59 nets, routed with 378 tracks and 86 vias.
It is built around the STM32F103T8U6, ADS131M03IRUK and TPS563201, with the TPS7A8101DRB among its other parts. Its parts include 25 capacitors, 15 resistors, 8 connectors, 6 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
4
STM32F103T8U6
VFQFPN-36(6x6)-40℃~+85℃ 12bit 20KB 26 2V~3.6V 32 Bit 64KB 72MHz ARM Cortex-M3 Built-in FLASH VFQFPN-36(6x6) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
ADS131M03IRUK
WQFN-20(3x3)-40℃~+125℃ 1.2V 102dB 2.4V~3.6V 20ppm/℃ 24 3 3.2mA 32kHz 64kHz 8.192MHz Built-in SPI、Serial port Sigma-Delta Support Yes WQFN-20(3x3) Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
TPS563201
UncategorisedTexas Instruments
TPS7A8101DRB
SON80.8V to 6V, 1A, Low-Noise, Wide-Bandwidth, High PSRR, Low-Dropout Linear RegulatorTexas InstrumentsUncategorised
README
README.mdfalcon_wing_module
General purpose modules for handling wing duties
Parts
64| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C7, C16, C17, C19, C20 |
| 6 | 10u | Capacitor_SMD:C_0603_1608Metric | C6, C10, C15, C23, C24, C25 |
| 6 | 120 | Resistor_SMD:R_0402_1005Metric | R2, R3, R10, R11, R12, R15 |
| 6 | 1u | Capacitor_SMD:C_0402_1005Metric | C5, C11, C13, C18, C21, C22 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R4, R5, R7, R9 |
| 5 | ADD | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5 |
| 3 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J4, J7, J8 |
| 2 | 10k 0.1% | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 470n | Capacitor_SMD:C_0402_1005Metric | C12, C14 |
| 2 | Conn_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J1, J2 |
| 1 | 30k9 | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 3u3 | Inductor_SMD:L_Changjiang_FNR6045S | L1 |
| 1 | 54k9 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | ADS131M03IRUK | Package_DFN_QFN:WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U5 |
| 1 | BL9161G-33 | Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U3 |
| 1 | Conn_ST_STDC14 | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | STM32F103T8U6 | Package_DFN_QFN:QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U1 |
| 1 | STRAIN | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J5 |
| 1 | TCAN3403 | Package_TO_SOT_SMD:TSOT-23-8 | U6 |
| 1 | TERM | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP6 |
| 1 | TORSION | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J6 |
| 1 | TPS563201 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | TPS7A8101 | Package_SON:VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm | U4 |
| 1 | WHITE | LED_SMD:LED_0805_2012Metric | D2 |
The 63 most common of 64 parts.
More from hpvdt/falcon_wing_module
3- 2 layers55 × 56 mm
- 2 layers17 × 15.6 mm
Similar boards
- 2 layers87.1 × 58.5 mm
Panel
ConfusedHello/STorM32-NT
A fork of the STorM32 NT controller board for my own purposes.
217 parts - 6 layers71 × 126 mm
QuasarSDR
petrinm/QuasarSDR-Hardware
Hardware design files are disrtributed under CERN Open Hardware Licence Version 2 - Weakly Reciprocal licence.
454 parts7CERN-OHL-W-2.0 - 4 layers96.9 × 71.6 mm
- 4 layers22 × 43.5 mm
- 2 layers100 × 60 mm
Ppse-2021
thomasnonis/ppse-2021
This is the repository for SALMO, the Solar Azimuth and eLevation Motorized lOcator. It is a PCB used for driving a tracking solar panel system, using GPS location and a MPPT algorithm to maximise the incident power.
133 parts5 - 4 layers150 × 100 mm
- 2 layers98.5 × 76 mm
Extension
dxy250312/-RK3588-PCB-YOLO-
基于 YOLOv11 与 ELF 2（RK3588）的 PCB 裸板缺陷检测系统。项目包含模型训练、数据集配置、RKNN 部署、Qt 可视化界面以及 RK3588 GPIO 控制示例，可用于学习边缘 AI 在工业视觉中的应用。
38 parts2MIT - 4 layers68.6 × 53.3 mm
Questions
How big is the Wing module rev 1 PCB?
It measures 50 × 21 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Wing module rev 1 use?
64 parts, built around the STM32F103T8U6, ADS131M03IRUK, TPS563201 and TPS7A8101DRB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wing module rev 1 KiCad files?
From the hpvdt/falcon_wing_module repository on GitHub, at the commit this page was made from: the board is hardware/wing_module_rev_1/wing_module_rev_1.kicad_pcb and its schematic hardware/indicator_rev_2/indicator_rev_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wing module rev 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hpvdt before reusing the design.