
Workshop 1
Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces
Workshop 2 is an open-source printed circuit board by Tessavana, from the Tessavana/Soft-interfaces-files repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 91.4 × 44.6 mm with 738 parts on 16 nets, routed with 90 tracks and 0 vias.
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces https://softinterfaces.com/EOP.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 736 | 200V | TP_Library:TP | TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V** +720 |
| 1 | 200V | TP_Library:TP 0.15mm | TP_200V** |
| 1 | Conn_01x16_Pin | TP_Library:TEST FPC_1 | J3 |

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

pris-digital/ManhattanBreakoutBoards-Panelized
A collection of breakout boards for manhattan style prototyping

johannesloetzsch/pillbus
Simple and configurable bus controllers based on STM32.


rraider/Seminarkurs2021
Entwicklung eines turingvollständigen, primitiven Microcontroller in der Software Digital

ytsurui/dcc-funcdecoder-pcb-t0507d
NMRA DCC Decoder Circuit Diagram / PCB Design Data for TOMIX 0507/0773

runger1101001/Magnetic_Encoders
Small (21x17mm) board for the SC60228 magnetic absolute angle sensor.

alxhoff/RGB-Mechanical-Keyboard
Mechanical keyboard with various configurations and "in-PCB" WS2812 RGB LEDs

romychs/Scorpion256TPlus
Scorpion ZS-256 Turbo+. Russian ZX Spectrum clone. Schematics and PCB.
It measures 91.4 × 44.6 mm and has 2 copper layers, 0.29 mm thick.
738 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tessavana/Soft-interfaces-files repository on GitHub, at the commit this page was made from: the board is Electronics/Electrodes/Workshop 2.kicad_pcb and its schematic Electronics/Electrodes/Workshop 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).