
Workshop 4
Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces
Workshop 1 is an open-source printed circuit board by Tessavana, from the Tessavana/Soft-interfaces-files repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 286.6 × 44.5 mm with 5,539 parts on 16 nets, routed with 92 tracks and 0 vias.
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces https://softinterfaces.com/EOP.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5537 | 200V | TP_Library:TP 0.15mm | TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V**, TP_200V** +5521 |
| 1 | Conn_01x16_Pin | TP_Library:TEST FPC_1 | J3 |
The 5,538 most common of 5,539 parts.

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

idlehandsdev/black_rabbit
A low poly LED mask made completely out of circuit boards. Second version of a series of high tech face changing masks.

SolderedElectronics/Smart-LED-WS2812B-Pixel-hardware-design
Hardware design, BOM, gerbers and 3D files for Smart-LED-WS2812B-Pixel designed by Soldered Electronics.

electroniceel/protoboard
Advanced protoboard layout with 1.27mm pitch for smd parts

SolderedElectronics/Mini-PCB-breadboard-protoboard-hardware-design
Hardware design, BOM, gerbers and 3D files for Mini-PCB-breadboard-protoboard designed by Soldered Electronics.


tactilearena/tactilearena.github.io
Scalable high-density tactile arenas for measuring ground-contact forces in freely moving animals: hardware design files, firmware, acquisition and analysis software, and the project website.

SolderedElectronics/Accelerometer---Gyroscope---Magnetometer-LSM9DS1TR-breakout-hardware-design
Hardware design, BOM, gerbers and 3D files for Accelerometer-&-Gyroscope-&-Magnetometer-LSM9DS1TR-breakout designed by Soldered Electronics.
It measures 286.6 × 44.5 mm and has 2 copper layers, 0.29 mm thick.
5,539 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tessavana/Soft-interfaces-files repository on GitHub, at the commit this page was made from: the board is Electronics/Electrodes/Workshop 1.kicad_pcb and its schematic Electronics/Electrodes/Workshop 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).