
Workshop 1
Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces
Flex PCB is an open-source printed circuit board by Tessavana, from the Tessavana/Soft-interfaces-files repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 92 × 40 mm with 265 parts on 4 nets, routed with 21 tracks and 0 vias.
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces https://softinterfaces.com/EOP.html
| Qty | Value | Footprint | References |
|---|---|---|---|
| 256 | TestPoint | TP_Library:TP | TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10, TP10 +240 |
| 8 | , , , , , , , | ||
| 1 | Conn_01x04_Pin | FPC:FPC_Conn_4 | J1 |

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces

Tessavana/Soft-interfaces-files
Sharing all circuit, PCB, code and design files to be able to replicate EOP soft interfaces




jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.

ai03-2725/duet-switch-tester
Switch tester designed for two of each switch for display and testability


SolderedElectronics/Soldered-Inkplate-6-COLOR-hardware-design
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-6-COLOR designed by Soldered Electronics.

girishji/optical-keyboard
Keyboard PCB for Gateron optical switches (KiCad project).
It measures 92 × 40 mm and has 2 copper layers, 0.29 mm thick.
265 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Tessavana/Soft-interfaces-files repository on GitHub, at the commit this page was made from: the board is Electronics/Electrodes/flex PCB.kicad_pcb and its schematic Electronics/Electrodes/Workshop 1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).