

OmniDirectional UAV
- Size
- 75 × 75.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 130
- Pads
- 444
- Tracks, vias
- 1,325, 160
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 1 Nov 2022
- Updated
- 21 Feb 2023
Overview
OmniDirectional UAV is an open-source printed circuit board by Teruru-52, from the Teruru-52/Omnidirectional-UAV-pcb repository on GitHub. It is a 2-layer board of 75 × 75.6 mm with 77 parts on 130 nets, routed with 1,325 tracks and 160 vias.
It is built around the STM32F446RET6, DRV8835DSS and LPS25HB, with the BSS138 and IRLML6402 among its other parts. Its parts include 22 capacitors, 19 connectors, 13 ICs, 12 resistors and 5 diodes. It belongs with the STM32 boards of this library.
Main components
5STM32F446RET6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 128KB 12bit 12bit 180MHz 32 Bit 50 512KB ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)DRV8835DSS
WSON-12-EP(2x3)-40℃~+150℃ 1.5A 2 2V~7V 305mΩ 95nA Yes WSON-12-EP(2x3) Brushed DC Motor Drivers ROHSTexas InstrumentsStepper Motor DriverLPS25HB
HLGA-10(2.5x2.5)-30℃~+105℃ 0.1hpa 0.2hpa 1.7V~3.6V 26Kpa~1.26bar I2C、SPI No HLGA-10(2.5x2.5) Pressure Sensors ROHSSTMicroelectronicsPressure SensorsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsIRLML6402
SOT-23-55℃~+150℃ 1 P-Channel 1.3W 110pF 12nC 145pF 20V 3.7A 400mV 633pF 65mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSGuangdong HottechMOSFETs
README
README.mdOmnidirectional-UAV-pcb
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C7, C9, C10, C11, C13, C16, C17, C18, C19, C20 |
| 8 | DRV8835 | omni:DRV8835 | U1, U2, U3, U4, U5, U6, U7, U13 |
| 8 | motor | Connector_PinSocket_1.27mm:PinSocket_1x02_P1.27mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J19 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R9, R10 |
| 5 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R8, R11, R12 |
| 4 | conn | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J9, J10, J11, J12 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C12 |
| 2 | 0.01u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C21 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C15 |
| 2 | Conn_01x08_Female | Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J15, J17 |
| 2 | Conn_01x11_Female | Connector_JST:JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal | J16, J18 |
| 2 | SKRPACE | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW2, SW3 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 133 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 20u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J8 |
| 1 | IRLML6402 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LPS25HB | Package_LGA:ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y | U11 |
| 1 | LT1963AES3-3.3 | Package_TO_SOT_SMD:SOT-223 | U10 |
| 1 | LXDC55FAAA-203 | omni:LXDC55FAA | U9 |
| 1 | MPU9250 | Package_DFN_QFN:QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm | U8 |
| 1 | ST-Link | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J14 |
| 1 | STM32F446RE | Package_QFP:LQFP-64_10x10mm_P0.5mm | U12 |
| 1 | SW_DPDT_x2 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | SW1 |
| 1 | Speaker | omni:STM0440-T-R | LS1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13 |
Similar boards
- 2 layers50 × 74 mm

- 2 layers72.8 × 100 mm

- 2 layers61 × 38 mm

- 2 layers58 × 84 mm

- 2 layers36 × 40 mm

- 2 layers103 × 50 mm

- 2 layers74 × 72 mm

- 4 layers69 × 99 mm

Questions
How big is the OmniDirectional UAV PCB?
It measures 75 × 75.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OmniDirectional UAV use?
77 parts, built around the STM32F446RET6, DRV8835DSS, LPS25HB and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OmniDirectional UAV KiCad files?
From the Teruru-52/Omnidirectional-UAV-pcb repository on GitHub, at the commit this page was made from: the board is OmniDirectional_UAV.kicad_pcb and its schematic OmniDirectional_UAV.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OmniDirectional UAV design in my own project?
Its repository states no licence, so its author keeps all rights: ask Teruru-52 before reusing the design.