

Nafuda
KiCAD data
- Size
- 94 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 72
- Pads
- 318
- Tracks, vias
- 198, 82
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
Nafuda is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 2-layer board of 94 × 63 mm with 74 parts on 72 nets, routed with 198 tracks and 82 vias.
It is built around the ESP32-C3-WROOM-02-H4 and WS2812B-2020. Its parts include 48 diodes, 9 capacitors, 7 switches, 5 connectors and 3 resistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesWS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | WS2812B-2020 | Yamaha:ws2812b-2020 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 9 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 7 | SW_MEC_5E | Yamaha:SW_SKRPABE010 | SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 4 | Conn_01x01_Pin | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | J2, J3, J4, J5 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U1 |
| 1 | LOGO | Yamaha:koken_logo_new_20 | G*** |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

- 2 layers42.5 × 51 mm

Similar boards
- 4 layers105 × 60 mm

Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
162 parts26 - 2 layers65 × 100 mm

- 2 layers22 × 48.8 mm

- 2 layers45.1 × 43.2 mm

Star Notifier
aayanrahman/Star-Notifier
Star-shaped USB-C ESP32-C3 board that lights up when Claude or Cursor is done
40 parts - 4 layers23 × 31.3 mm

Temperature node
cegea/temperature_node_hw
PCB design for a temperature sensor based on SHT and ESP32
36 partsGPL-3.0 - 4 layers144 × 133 mm

- 4 layers35.5 × 74.5 mm

Room environment monitor
kevinlutzer/room-environment-monitor
An IOT device built of the raspberry pi
57 parts - 2 layers21 × 41 mm

Questions
How big is the Nafuda PCB?
It measures 94 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nafuda use?
74 parts, built around the ESP32-C3-WROOM-02-H4 and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nafuda KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is Nafuda/Nafuda.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nafuda design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.