

ATtiny pcb
KiCAD data
- Size
- 42.5 × 51 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 25
- Pads
- 468
- Tracks, vias
- 672, 102
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
ATtiny pcb is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 2-layer board of 42.5 × 51 mm with 66 parts on 25 nets, routed with 672 tracks and 102 vias.
It is built around the ATTINY1604-SSF and CH340K. Its parts include 18 resistors, 12 capacitors, 12 ICs, 12 connectors and 6 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY1604-SSF
SOIC-14-40℃~+125℃ 10bit 12 16KB 16MHz 1KB 2.7V~5.5V 256Byte 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340K
ESSOP-10-150mil-1mm-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial ESSOP-10-150mil-1mm USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2 |
| 12 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R1, R1, R1, R1, R1, R2, R2, R2, R2, R2, R2 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R4, R4, R4, R4, R4 |
| 6 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U1, U1, U1, U1, U1 |
| 6 | CH340K | Package_SO:SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U2, U2, U2, U2, U2, U2 |
| 6 | Conn_02x07_Counter_Clockwise | Package_DIP:DIP-14_W10.16mm | J2, J2, J2, J2, J2, J2 |
| 6 | LED_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D2, D2, D2, D2, D2 |
| 6 | SW_MEC_5E | Yamaha:SW_SKRPABE010 | SW1, SW1, SW1, SW1, SW1, SW1 |
| 6 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1, J1, J1, J1, J1, J1 |
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

Similar boards
- 2 layers100 × 90 mm

- 2 layers58 × 58 mm

- 2 layers60 × 100 mm

- 2 layers19.8 × 17.8 mm

- 4 layers40 × 27 mm

- 2 layers50 × 40.9 mm

GR ATTiny LFO
GadgetReboot/ATTiny_LFO
Dual low frequency oscillators using ATTiny and MCP4725 DACs
36 parts3 - 2 layers77.2 × 50.3 mm

- 2 layers58.3 × 98.6 mm

Questions
How big is the ATtiny pcb PCB?
It measures 42.5 × 51 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ATtiny pcb use?
66 parts, built around the ATTINY1604-SSF and CH340K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ATtiny pcb KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is ATtiny/ATtiny_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ATtiny pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.