

Keyboard
KiCAD data
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 53
- Pads
- 231
- Tracks, vias
- 407, 39
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
Keyboard is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 2-layer board of 80 × 100 mm with 73 parts on 53 nets, routed with 407 tracks and 39 vias.
It is built around the 74LS148P-E and 74HC00D. Its parts include 21 resistors, 21 diodes, 16 switches, 4 capacitors and 3 ICs. It belongs with the keyboards and input boards of this library.
Main components
274LS148P-E
DIP-16-20℃~+75℃ 10mA 15ns@5V,15pF 4.75V~5.25V 400uA 74LS 8mA Decoder DIP-16 Signal Switches, Multiplexers, Decoders ROHSRenesas ElectronicsSignal Switches, Multiplexers, Decoders74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | R_Small | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 +5 |
| 20 | LED_Small | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20 +4 |
| 16 | SW_Push_45deg | keyboards:chocswbrown | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 3 | , , | ||
| 3 | C_Small | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3 |
| 2 | 74LS148 | Package_DIP:DIP-16_W7.62mm | U1, U2 |
| 1 | 74HC00 | Package_DIP:DIP-14_W7.62mm_SMDSocket_SmallPads | U3 |
| 1 | C_Polarized_Small | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | LED_Small | LED_THT:LED_Rectangular_W3.0mm_H2.0mm | D21 |
The 69 most common of 73 parts.
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers72 × 47.5 mm

- 2 layers42.5 × 51 mm

Similar boards
- 2 layers528.3 × 165.1 mm

- 4 layers160 × 100 mm

Rosco m68k
rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)
140 parts200 - 2 layers134.6 × 208.3 mm

- 6 layers243.8 × 243.8 mm

Raven
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack
331 parts87 - 4 layers214 × 170 mm

.C68
ProbablyNotArtyom/Blitz
Blitz is a 68030 based homebrew computer I designed over the course of nearly 3 years, starting in late 2017.
185 parts51GPL-2.0 - 2 layers159.5 × 99.8 mm

- 4 layers340 × 210 mm

- 2 layers58.4 × 68.4 mm

Questions
How big is the Keyboard PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyboard use?
73 parts, built around the 74LS148P-E and 74HC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyboard KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is alu/keyboard/keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.