

AND8bit
KiCAD data
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 89
- Pads
- 330
- Tracks, vias
- 840, 142
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
AND8bit is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 2-layer board of 100 × 100 mm with 65 parts on 89 nets, routed with 840 tracks and 142 vias.
It is built around the 74AHC541D, MCP602-I/P and 74AHC1GU04SE, with the 74LS32SC and 74LS86 among its other parts. Its parts include 15 resistors, 15 ICs, 14 capacitors, 12 diodes and 5 connectors.
Main components
574AHC541D
SO-20-300mil-40℃~+125℃ 1 2V~5.5V 74AHC 8 80uA 8mA 8mA 9ns@5.5V,50pF Schmitt trigger Tri-State Unidirectional SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffer/Driver/TransceiverMCP602-I/P
PDIP-8-40℃~+85℃ 1pA 1pA 2 2.3V/us 2.5uV/℃ 2.7V~6V 2.8MHz 22mA 230uA 29nV/√Hz@1kHz 700uV 90dB Built-in compensation、ESD protection Rail-to-rail output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier74AHC1GU04SE
SOT-353-40℃~+85℃ 1 1 1.7V~4.4V 1.8V、2.7V、4V 1uA 200mV、300mV、500mV 2V~5.5V 300mV~1.1V 6mA 6mA 74AHC 7ns@5V,50pF SOT-353 Inverters ROHSDiodes IncorporatedInverters74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic Gates74LS86
DIP-14-20℃~+75℃ 10mA 2.7V 23ns@5V,15pF 2V 400mV 400uA 5V 74LS 800mV 8mA XOR Gate DIP-14 Logic Gates ROHSHITLogic Gates
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | C_Small | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C14 |
| 12 | LED_Small | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 12 | R_Small | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12 |
| 5 | 74AHC541 | Package_DIP:DIP-20_W7.62mm | U3, U4, U7, U8, U10 |
| 3 | 74LS08 | Package_DIP:DIP-14_W7.62mm | U1, U2, U14 |
| 3 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J2, J3 |
| 2 | , | ||
| 2 | 51k | Resistor_SMD:R_0603_1608Metric | R13, R15 |
| 2 | 74AHC1GU04 | Library:ssop5-p-0.65a | U9, U15 |
| 2 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U5, U6 |
| 2 | 74LS86 | Package_DIP:DIP-14_W7.62mm | U11, U12 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | C_Polarized_Small | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C9 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | MCP602 | Package_DIP:DIP-8_W7.62mm | U13 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
The 63 most common of 65 parts.
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

Similar boards
- 4 layers140 × 140 mm

- 2 layers50.8 × 25.4 mm

Esp jtag
Muriukidavid/esp-jtag
A JTAG programmer for esp targets based on esp-prog redone in KiCad
72 parts5Apache-2.0 - 4 layers145.5 × 89.6 mm

- 4 layers116 × 55 mm

- 4 layers80.9 × 100.6 mm

- 2 layers42 × 30 mm

Qwiic power switch
ayodhyaphanidurgaprasad-source/PCB-Projects
Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.
23 parts - 2 layers187.3 × 109.5 mm

Z80RP2350b
kysilv/z80-rp2350b-zx-compatible
Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA
131 parts9GPL-3.0 - 2 layers100 × 135 mm

Questions
How big is the AND8bit PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AND8bit use?
65 parts, built around the 74AHC541D, MCP602-I/P, 74AHC1GU04SE and 74LS32SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AND8bit KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is alu/AND8bit/AND8bit.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AND8bit design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.