

Ammeter
KiCAD data
- Size
- 25 × 15 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 58
- Pads
- 216
- Tracks, vias
- 316, 89
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Apr 2025
- Updated
- 5 Nov 2026
Overview
Ammeter is an open-source printed circuit board by Tert2, from the Tert2/KiCAD repository on GitHub. It is a 4-layer board of 25 × 15 mm with 45 parts on 58 nets, routed with 316 tracks and 89 vias.
It is built around the ATTINY1604-SSF, CH340E and TLV9001IDCK, with the AP63203WU and TMUXHS221NKGT among its other parts. Its parts include 16 resistors, 15 capacitors, 8 ICs, 3 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATTINY1604-SSF
SOIC-14-40℃~+125℃ 10bit 12 16KB 16MHz 1KB 2.7V~5.5V 256Byte 8 Bit AVR Built-in FLASH SOIC-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340E
MSOP-10150uA 20mA 2Mbps 3.3V、5V Transceiver USB 2.0 MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersTLV9001IDCK
SC-70-5-2.75V~-900mV、900mV~2.75V -40℃~+125℃ 1 1.6mV 1.8V~5.5V 1MHz 2V/us 2pA 4.7nV/√Hz@1kHz 40mA 5pA 600nV/℃ 60uA 86dB EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierAP63203WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.3V 3.8V~32V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersTMUXHS221NKGT
UQFN-10(1.4x1.8)-40℃~+125℃ 1.7pF 16us 2:1 3.3GHz 3V~3.6V 500ns 80ps 8Ω UQFN-10(1.4x1.8) Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
README
README.mdOverview
- This is the KiCAD Projects Repository.
- I recommend not to use these KiCAD data.
- Some projects are unfinished or have issues in the circuit.
- I designed these circuits based on whether I can solder them, not on whether the average person can.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 4.7k | Yamaha:R1005 | R3, R4, R9, R10, R11, R13, R14 |
| 5 | 0.1u | Yamaha:1005 | C1, C2, C3, C6, C13 |
| 5 | 10k | Yamaha:R1005 | R1, R2, R8, R12, R16 |
| 3 | 1u | Yamaha:1005 | C7, C8, C9 |
| 3 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J1, J2, J3 |
| 2 | 1n | Yamaha:1005 | C4, C5 |
| 2 | 22u | Yamaha:C1608 | C14, C15 |
| 2 | 4.7u | Yamaha:1005 | C10, C11 |
| 2 | SW_MEC_5E | Yamaha:SKRPABE010 | SW1, SW2 |
| 1 | 100 | Yamaha:R1005 | R6 |
| 1 | 100k | Yamaha:R1005 | R7 |
| 1 | 10u | Yamaha:1005 | C12 |
| 1 | 1k | Yamaha:R1005 | R15 |
| 1 | 4.7u | Yamaha:C2520 | L1 |
| 1 | 8m | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | AP63203WU | Package_TO_SOT_SMD:TSOT-23-6 | U7 |
| 1 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | INA181 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | MCP1501-12xRW | Package_DFN_QFN:WDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm | U1 |
| 1 | TLV9001IDCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U2 |
| 1 | TMUXHS221NKGT | Yamaha:TMUXHS221NKGT | IC1 |
| 1 | ~ | Yamaha:X032-6032TSWAG02-H14 F | U5 |
More from Tert2/KiCAD
12- 2 layers100 × 100 mm

- 2 layers83 × 100 mm

- 2 layers58.4 × 68.6 mm

- 2 layers86 × 89 mm

- 2 layers83.3 × 75.6 mm

- 2 layers26.8 × 90 mm

- 2 layers72 × 72 mm

- 2 layers100 × 99 mm

- 2 layers80 × 90 mm

- 2 layers94 × 63 mm

- 2 layers80 × 100 mm

- 2 layers72 × 47.5 mm

Similar boards
- 2 layers48 × 73 mm

- 4 layers110 × 64 mm

SYCL Badge 2024
ZigEmbeddedGroup/sycl-badge
The badge for the SYCL conference! https://zigembeddedgroup.github.io/sycl-badge/
145 parts39 - 4 layers101.5 × 44.8 mm

- 4 layers94.3 × 81.8 mm

YukaLink revA
Misaka0x2730/YukaLink
Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.
321 parts3GPL-3.0 - 4 layers85 × 56 mm

- 2 layers46.7 × 20.3 mm

- 4 layers

- 2 layers145 × 100 mm

Questions
How big is the Ammeter PCB?
It measures 25 × 15 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ammeter use?
45 parts, built around the ATTINY1604-SSF, CH340E, TLV9001IDCK and AP63203WU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ammeter KiCad files?
From the Tert2/KiCAD repository on GitHub, at the commit this page was made from: the board is ammeter/ammeter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ammeter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Tert2 before reusing the design.