2 layers55 × 40 mm
2 layers60 × 57.5 mm
Controller
terjeio/PCBLaserSchematics8KiCad schematics and PCB designs for PCB Laser
- Size
- 60 × 57.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 61
- Pads
- 170
- Tracks, vias
- 398, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 1 Apr 2017
- Updated
- 21 Sep 2017
Overview
Controller is an open-source printed circuit board by terjeio, from the terjeio/PCBLaserSchematics repository on GitHub. It is a 2-layer board of 60 × 57.5 mm with 34 parts on 61 nets, routed with 398 tracks and 0 vias.
It is built around the MSP430G2553CY, FT232RL and 100UF/16V. Its parts include 8 resistors, 8 connectors, 7 capacitors, 4 ICs and 2 diodes. It belongs with the MSP430 boards of this library.
Main components
3MSP430G2553CY
-1.8V~3.6V 10bit 16 16MHz MSP430 CPU16 - Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB Converters
100UF/16V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdPCBLaserSchematics
KiCad schematics and PCB designs for my Laser PCB Exposer.
Related firmware in a separate project.
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0R | Resistors_SMD:R_1206 | R3, R7, R8 |
| 3 | 100nF | Capacitors_SMD:C_1206 | C1, C3, C4 |
| 2 | 100uF/16V | Capacitors_Elko_ThroughHole:Elko_vert_11.5x8mm_RM3.5 | C6, C7 |
| 2 | 6K8 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R4, R5 |
| 2 | LED | LEDs:LED-3MM | D1, D2 |
| 2 | POLOLU_A4988 | Engineering_Conn:Polulu_A4988 | U3, U4 |
| 2 | R | Resistors_SMD:R_1206 | R1, R2 |
| 1 | 10uF/16V | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_Reflow | C2 |
| 1 | 12V DC | Connect:BARREL_JACK | CON1 |
| 1 | 1nF | Capacitors_SMD:C_1206 | C5 |
| 1 | 47K | Resistors_SMD:R_1206 | R6 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P3 |
| 1 | CONN_02X08 | Pin_Headers:Pin_Header_Angled_2x08 | P4 |
| 1 | FT232RL | Housings_SSOP:SSOP-28_5.3x10.2mm_Pitch0.65mm | U1 |
| 1 | Ferrite bead | Choke_Axial_ThroughHole:Choke_Horizontal_RM10mm | L1 |
| 1 | MSP430G2553 | Engineering_Conn:TSSOP28 | U2 |
| 1 | PGM | Pin_Headers:Pin_Header_Straight_1x03 | P5 |
| 1 | SWPOWER | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
| 1 | USB_B | Connect:USB_B | P2 |
| 1 | XAXIS | Engineering_Conn:CONN_PWR_4P | P6 |
| 1 | YAXIS | Engineering_Conn:CONN_PWR_4P | P7 |
The 30 most common of 34 parts.
Questions
How big is the Controller PCB?
It measures 60 × 57.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller use?
34 parts, built around the MSP430G2553CY, FT232RL and 100UF/16V. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller KiCad files?
From the terjeio/PCBLaserSchematics repository on GitHub, at the commit this page was made from: the board is Controller/Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask terjeio before reusing the design.
More from terjeio/PCBLaserSchematics
2- 2 layers52 × 22.5 mm
Similar boards
- 2 layers49.5 × 56.4 mm
Toadstool MSPg2553
CrashBangProto/Toadstool-MSPg2553
The Toadstool family is made up of breadboard-friendly prototyping boards that house a microcontroller, and modules called Caps that connect using a standard header.
27 partsGPL-3.0 - 2 layers
- 2 layers98.5 × 50 mm
Controller
terjeio/PCBLaserMkII
Mechanical and electrical design files for revised version of my PCB Laser exposer
37 parts18 - 2 layers97.1 × 97 mm
- 2 layers97 × 97 mm
QO100 RX
barisdinc/N3B_SDR_Transceiver_HW
V/U/SHF and QO-100 SDR Transceiver Project
167 parts20GPL-3.0 - 2 layers97.1 × 97 mm
- 2 layers178 × 129.5 mm
Rgb board
skumlos/if-c01comg-clone-tht-full
A full sized SCART/BNC version of the IF-C01COMG clone base board
89 parts15WTFPL - 2 layers99.6 × 84.7 mm
Amplified WSPR Beacon v4
kholia/Easy-Beacons-STEM
Easy-Beacons project adapted for STEM education. Powered by Raspberry Pi Pico (W) boards. WSPR + FT8 beacons for science (TM).
54 parts13