2 layers60 × 57.5 mm
2 layers
Timelapse
MarSik/timelapseTimelapse controller based on msp430g2553 CPU
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 39
- Pads
- 137
- Tracks, vias
- 328, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Jul 2016
- Updated
- 20 Dec 2017
Overview
Timelapse is an open-source printed circuit board by MarSik, from the MarSik/timelapse repository on GitHub. It is a 2-layer board with 37 parts on 39 nets, routed with 328 tracks and 11 vias.
It is built around the MSP430G2553CY and IRLML6402. Its parts include 10 resistors, 8 capacitors, 5 ICs, 5 switches and 2 diodes. It belongs with the MSP430 boards of this library.
Main components
2Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | smd-handsolder:C_1206_HandSoldering | C101, C106, C107, C108 |
| 4 | 10n | smd-handsolder:C_1206_HandSoldering | C102, C103, C104, C105 |
| 4 | 1k | smd-handsolder:R_1206_HandSoldering | R101, R105, R108, R109 |
| 4 | SW_PUSH | th-normal:Button_B3F-315X | SW102, SW103, SW104, SW105 |
| 3 | 1k | th-npth:Resistor_Horizontal_RM10mm | R102, R103, R104 |
| 2 | 10k | smd-handsolder:R_1206_HandSoldering | R106, R107 |
| 2 | Cosmo_1010-817 | th-npth:DIP-4_W300mil_LongPads | U102, U103 |
| 2 | LED | th-normal:LED_L-1384_AL-1 | D101, D102 |
| 1 | 0R | smd-handsolder:C_1206_HandSoldering | R99 |
| 1 | Battery_LiPol_JST-2 | smd-handsolder:Connector_JST-2_SMD_HandSoldering | BT101 |
| 1 | CONN_01X03 | th-normal:Pin_Header_Angled_1x03 | P101 |
| 1 | IRLML6402 | smd-handsolder:SOT-23_HandSoldering | Q103 |
| 1 | LCD_Nokia_5510 | th-normal:LCD_Nokia_5510 | LCD101 |
| 1 | LP2992AIM5-3.3CT-ND | smd-handsolder:SOT-23-5_HandSoldering | U105 |
| 1 | MAX1555 | smd-handsolder:SOT-23-5_HandSoldering | U104 |
| 1 | MSP430G2553 | th-npth:DIP-20_W300mil_LongPads | U101 |
| 1 | Raltron_32_768kHz_R26 | th-normal:Crystal_Round_Vertical_2mm | Q102 |
| 1 | SWITCH_DT | th-normal:Button_C&K_OS102011MA1QN1 | SW101 |
| 1 | USB_MINI_B_GMe | smd-normal:Connector_USB-Mini-B_GMe_SMD | CONN101 |
The 36 most common of 37 parts.
Questions
What parts does the Timelapse use?
37 parts, built around the MSP430G2553CY and IRLML6402. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Timelapse KiCad files?
From the MarSik/timelapse repository on GitHub, at the commit this page was made from: the board is hw/timelapse.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Timelapse design in my own project?
Its repository states no licence, so its author keeps all rights: ask MarSik before reusing the design.
Similar boards
- 2 layers49.5 × 56.4 mm
Toadstool MSPg2553
CrashBangProto/Toadstool-MSPg2553
The Toadstool family is made up of breadboard-friendly prototyping boards that house a microcontroller, and modules called Caps that connect using a standard header.
27 partsGPL-3.0 - 4 layers142.2 × 82.6 mm
A10-A20-OLINUXINO MICRO-4GB Rev D
lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script
558 parts429GPL-2.0 - 2 layers
- 4 layers81.6 × 88.8 mm
Cheetah MX4-Mini
KaiPereira/Cheetah-MX4-Mini
A powerful yet compact 3D printer motherboard that supports TMC stepsticks, fans, heaters, screens and thermistors
171 parts179 - 4 layers60 × 28 mm
- 2 layers57.2 × 35.1 mm
- 2 layers68.6 × 53.3 mm
