Skip to the content
2 layers110 × 75 mmFT MainBoard, the printed circuit board in 3D

An open source firesport timer designed for "fire attack" discipline

Size
110 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
71
Nets
58
Pads
223
Tracks, vias
423, 27
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
18 Sep 2023
Updated
14 May 2025

Overview

FT MainBoard is an open-source printed circuit board by Telekomak, from the Telekomak/FiresportTimer repository on GitHub. It is a 2-layer board of 110 × 75 mm with 71 parts on 58 nets, routed with 423 tracks and 27 vias.

It is built around the ATMEGA328PB-AU, FT231XS-R and L78M05ABDT-TR, with the BZX384-B5V1,115-JSM and PMBT3904,215 among its other parts. Its parts include 22 resistors, 16 capacitors, 5 diodes, 5 connectors and 5 switches. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

5

Parts

71
QtyValueFootprintReferences
7TestPoint_Pad_1.0x1.0mmTestPoint:TestPoint_Pad_1.0x1.0mmL, R, RESET, RX, START, STOP, TX
61000RResistor_SMD:R_0603_1608MetricR6, R7, R8, R9, R10, R11
6100nFCapacitor_SMD:C_0603_1608MetricC1, C2, C5, C16, C17, C18
41.2KCapacitor_SMD:C_0603_1608MetricR13, R14, R19, R20
410KResistor_SMD:R_0603_1608MetricR12, R17, R18, R22
4330RResistor_SMD:R_0603_1608MetricR2, R3, R15, R16
3100nCapacitor_SMD:C_0603_1608MetricC8, C9, C10
3SW_PushButton_Switch_THT:SW_PUSH-12mmSW1, SW2, SW3
21nCapacitor_SMD:C_0603_1608MetricC14, C15
222pFCapacitor_SMD:C_0603_1608MetricC3, C4
227RResistor_SMD:R_0603_1608MetricR4, R5
247pFCapacitor_SMD:C_0603_1608MetricC6, C7
2BZX384-B5V1,115Diode_SMD:D_SOD-323D1, D2
2Conn_01x02_Pincustom_components:CON_2_pinCON1, CON4
2Conn_01x04_Pincustom_components:CON_4_pinCON3, CON5
2PMBT3904,215Package_TO_SOT_SMD:SOT-23Q1, Q2
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmOSC1
1200RResistor_SMD:R_0603_1608MetricR1
1330nFCapacitor_SMD:C_0603_1608MetricC11
14K7Resistor_SMD:R_0603_1608MetricR21
174HC3G14DP,125 Package_SO:MSOP-8_3x3mm_P0.65mmIC3
1ATmega328PB-AUPackage_QFP:TQFP-32_7x7mm_P0.8mmIC1
1AVR-ISP-6Connector_IDC:IDC-Header_2x03_P2.54mm_VerticalCON6
1Conn_01x16_PinConnector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalHDR1
1FT231XS-R Package_SO:SSOP-20_3.9x8.7mm_P0.635mmIC2
1GREENLED_SMD:LED_0603_1608MetricLED2
1L78M05ABDT-TRPackage_TO_SOT_SMD:TO-252-2IC4
1LOGOcustom_components:QRG***
1LOGOcustom_components:screwG***
1REDLED_SMD:LED_0603_1608MetricLED3
1SW_Pushcustom_components:switchSW4
1SW_SPSTButton_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mmSW5
1Vishay 64X 10KConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalRV1
1YELLOWLED_SMD:LED_0603_1608MetricLED1

More from Telekomak/FiresportTimer

4
  • 2 layers110 × 121 mmPanel, the printed circuit board in 3D

    Panel

    Telekomak/FiresportTimer

    An open source firesport timer designed for "fire attack" discipline

    116 parts
  • 2 layers40 × 40 mmFT TargetSwitch, the printed circuit board in 3D

    FT TargetSwitch

    Telekomak/FiresportTimer

    An open source firesport timer designed for "fire attack" discipline

    9 parts
  • 2 layers8 × 17 mmFT Hall, the printed circuit board in 3D

    FT Hall

    Telekomak/FiresportTimer

    An open source firesport timer designed for "fire attack" discipline

    5 parts
  • 2 layers25 × 25 mmFT USB, the printed circuit board in 3D

    FT USB

    Telekomak/FiresportTimer

    An open source firesport timer designed for "fire attack" discipline

    2 parts

Similar boards

  • 4 layers51.2 × 51.2 mmThe extender, the printed circuit board in 3D

    The extender

    H3wastooshort/the_extender

    it extends your phones storage, battery life, and audio interfaces

    123 parts2GPL-3.0
  • 4 layers85 × 57.5 mmFirefly, the printed circuit board in 3D

    Firefly

    jdthorpe/kicad-module-parser

    A PegJS parser for Kicad Modules

    104 parts12
  • 4 layers50.5 × 66 mmArduino++, the printed circuit board in 3D

    Arduino++

    Aghosh993/EE_HWDEV_KiCAD

    Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

    83 parts1GPL-3.0
  • 2 layers100 × 88 mmArduinoDCC++, the printed circuit board in 3D

    ArduinoDCC++

    danielvilas/DigitalTrains

    Digital Trains

    94 partsMIT
  • 2 layers70 × 79 mmIntegrated circuits, the printed circuit board in 3D

    Integrated circuits

    LilyTronics/lily_kicad_lib

    KiCad library by LilyTronics

    37 parts2MIT
  • 4 layers76 × 100 mmChlorine revD, the printed circuit board in 3D

    Chlorine revD

    kanengomibako/Chlorine

    206 parts11Unlicense
  • 4 layers164 × 118 mmOpenEFI rev4 bkp, the printed circuit board in 3D

    OpenEFI rev4 bkp

    Churrosoft/OpenEFI-PCB

    Coleccion de PCB y planos recomendados para montar una OpenEFI

    345 parts8CERN-OHL-S-2.0
  • 4 layers100 × 100 mmPico Dev iCE, the printed circuit board in 3D

    Pico Dev iCE

    frohro/pico-dev-ice

    This is a direct down conversion (DDC) HF transceiver & VNA using the Raspberry Pi Pico and the iCE40UP5K.

    294 parts3

Questions

How big is the FT MainBoard PCB?

It measures 110 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the FT MainBoard use?

71 parts, built around the ATMEGA328PB-AU, FT231XS-R, L78M05ABDT-TR and BZX384-B5V1,115-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the FT MainBoard KiCad files?

From the Telekomak/FiresportTimer repository on GitHub, at the commit this page was made from: the board is PCB/FT_MainBoard/FT_MainBoard.kicad_pcb and its schematic PCB/FT_Hall/FT_Hall.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the FT MainBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask Telekomak before reusing the design.