
RPi IFaceBoard
Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects
Arduino++ is an open-source printed circuit board by Aghosh993, from the Aghosh993/EE_HWDEV_KiCAD repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 50.5 × 66 mm with 83 parts on 67 nets, routed with 1,409 tracks and 139 vias.
It is built around the ATMEGA328PB-AU, FT231XS-R and TS5A23159, with the LSM6DS3H among its other parts. Its parts include 30 capacitors, 16 resistors, 11 ICs, 8 connectors and 5 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1 uF | Capacitors_SMD:C_0402 | C1, C2, C3, C4, C5, C8, C9, C10, C11, C13, C14, C15, C18, C19, C20, C21 |
| 8 | 4.7k | Resistors_SMD:R_0402 | R5, R6, R7, R8, R9, R10, R11, R12 |
| 6 | 15 uF | Capacitors_SMD:C_0805_HandSoldering | C12, C16, C17, C22, C23, C30 |
| 5 | TEST_1P | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | W2, W6, W7, W8, W9 |
| 4 | 22 uF | Capacitors_SMD:C_1206 | C26, C27, C28, C29 |
| 4 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P2, P4, P6, P7 |
| 4 | PTH | mechanical:PTH | TH1, TH2, TH3, TH4 |
| 2 | 27 | Resistors_SMD:R_0603 | R2, R4 |
| 2 | 30 pF | Capacitors_SMD:C_0402 | C24, C25 |
| 2 | 4.7K | Resistors_SMD:R_0402 | R1, R13 |
| 2 | 47 pF | Capacitors_SMD:C_0603 | C6, C7 |
| 2 | A3909 | PowerPackages:MSOP10-3x3-EP | U5, U6 |
| 2 | D_Zener | PowerPackages:DO-214AA | D3, D4 |
| 2 | LM5050-1 | PowerPackages:SOT-23-6-SC70 | U9, U10 |
| 2 | Q_NMOS_DGS | PowerPackages:SOT2-3_FET | Q1, Q2 |
| 2 | Schottky_Vf=220mV | PowerPackages:SOD-882 | D1, D2 |
| 2 | TS5A23159 | Housings_SSOP:TSSOP-10_3x3mm_Pitch0.5mm | U3, U4 |
| 1 | 10K | Resistors_SMD:R_0603 | R15 |
| 1 | 120 | Resistors_SMD:R_0603 | R3 |
| 1 | 30 | Resistors_SMD:R_0402 | R16 |
| 1 | 374 | Resistors_SMD:R_0603 | R14 |
| 1 | 40-Ohm FB | Capacitors_SMD:C_0805_HandSoldering | L1 |
| 1 | ATMEGA328PB-A | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | IC1 |
| 1 | CONN_01X18 | Pin_Headers:Pin_Header_Straight_1x18 | P1 |
| 1 | CONN_01X21 | Pin_Headers:Pin_Header_Straight_1x21 | P5 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P8 |
| 1 | Crystal | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | FT231XS | smd_tssop:SSOP-20-8.66x3.91_0.635mm | U1 |
| 1 | LD1085C | PowerPackages:DPAK | U8 |
| 1 | LED | LEDs:LED-0603 | D5 |
| 1 | LSM6DS3H | sensors:LCC-14 | U7 |
| 1 | TAR5SB33 | housings_sot_custom:SC-74A_SOT23-5 | U2 |
| 1 | USB_OTG | Connect:USB_Micro-B | P3 |

Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects

Aghosh993/EE_HWDEV_KiCAD
Repository containing all KiCAD schematic, layout and project files for PCB schematic capture and layout projects




Telekomak/FiresportTimer
An open source firesport timer designed for "fire attack" discipline


sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

shorepine/tulipcc
The Tulip Creative Computer and AMYboard - portable Python synthesizers
It measures 50.5 × 66 mm and has 4 copper layers, 1.6 mm thick.
83 parts, built around the ATMEGA328PB-AU, FT231XS-R, TS5A23159 and LSM6DS3H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Aghosh993/EE_HWDEV_KiCAD repository on GitHub, at the commit this page was made from: the board is arduino++/arduino++.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).