TeFka/PeatMonitoringProject1This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
GroupProjectCustom is an open-source printed circuit board by TeFka, from the TeFka/PeatMonitoringProject repository on GitHub. It is a 2-layer board of 72 × 64.6 mm with 73 parts on 84 nets, routed with 870 tracks and 130 vias.
It is built around the STM32L412RBT6P, TMP126EDBVRQ1 and 2N7002K. Its parts include 20 resistors, 16 capacitors, 5 transistors, 4 diodes and 3 ICs. It belongs with the STM32 boards of this library.
Designed by Oliver Davies
The main PCB for STM32 chip. Provides SPI, I2C, UART and analogue connections that allow communicaton with all relevant components. Connection to the battery is also availalbe to provide power.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C13, C14, C15, C16 |
| 7 | 1k | Resistor_SMD:R_0603_1608Metric | R4, R5, R11, R13, R14, R16, R18 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R12, R15, R17, R19, R20 |
| 5 | 2N7002K | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 4 | 10p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C11, C12 |
| 4 | 330 | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9 |
| 4 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C1, I2C2, I2C3, I2C4 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 3 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | ADC1, ADC2, ADC3 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | BTN1, BTN2, RST1 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C10 |
| 2 | Conn_01x05_Female | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | LPUART1, USART1 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 390 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | PWR1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06_Female | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SPI1 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J2 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | HSE1 |
| 1 | Crystal | Crystal:Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm_HandSoldering | LSE1 |
| 1 | FerriteBead_Small | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1 |
| 1 | STM32L412RBT6P | Custom_Footprints:STM32L412RBT6P_Foot | U2 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | BOOT1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | TMP126EDBVRQ1 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U3 |
It measures 72 × 64.6 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the STM32L412RBT6P, TMP126EDBVRQ1 and 2N7002K. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TeFka/PeatMonitoringProject repository on GitHub, at the commit this page was made from: the board is Hardware/STM32_board/GroupProjectCustom.kicad_pcb and its schematic Hardware/PressureSensor/LPS28Report.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TeFka before reusing the design.
TeFka/PeatMonitoringProject
This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
TeFka/PeatMonitoringProject
This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
enpeasant-09/Parikshit-Satellite-Interface-Board
This is the Interface board for performance assurance of the Parikshit Student Satellite.
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
AaronC81/delta-pico
Powerful scientific calculator based on the Raspberry Pi Pico
avenhaus/SO-ARM100-Encoders
It explores to use much cheaper magnetic encoders for the Leader Arm instead of the regular servos. These dummy servos are also much easier to move manually, as there is no gear train that needs to back drive the servo…
