TeFka/PeatMonitoringProject1This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
LPS28Report is an open-source printed circuit board by TeFka, from the TeFka/PeatMonitoringProject repository on GitHub. It is a 2-layer board of 20 × 20 mm with 5 parts on 6 nets, routed with 39 tracks and 6 vias.
Its parts include 1 capacitor and 1 connector.
Designed by Oliver Davies
The main PCB for STM32 chip. Provides SPI, I2C, UART and analogue connections that allow communicaton with all relevant components. Connection to the battery is also availalbe to provide power.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | SAO_GND1, SAO_Vdd1 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | Conn_01x05_Male | Connector_PinHeader_1.00mm:PinHeader_1x05_P1.00mm_Vertical_SMD_Pin1Left | J1 |
| 1 | LPS28DFWTR | Sensor_Pressure:LPS28DFWTR | PressureS1 |
It measures 20 × 20 mm and has 2 copper layers, 1.6 mm thick.
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the TeFka/PeatMonitoringProject repository on GitHub, at the commit this page was made from: the board is Hardware/PressureSensor/LPS28Report.kicad_pcb and its schematic Hardware/PressureSensor/LPS28Report.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask TeFka before reusing the design.
TeFka/PeatMonitoringProject
This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
TeFka/PeatMonitoringProject
This is the repository for used for storage of all software code and other components produced during the project of developing the peat monitoring device or University of Nottingham EEEE4019 Group Project.
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.