
FPGBA
teejaytiger/FPGBA
Full overhaul of the GBA mainboard to free ourselves from supply chain death

Full overhaul of the GBA mainboard to free ourselves from supply chain death
Restore backup 2026-07-22T16-07-43-759 is an open-source printed circuit board by teejaytiger, from the teejaytiger/FPGBA repository on GitHub. It is a 4-layer board of 78.8 × 40 mm with 60 parts on 127 nets, routed with 1,116 tracks and 289 vias.
It is built around the XC7S50-L1CSGA324I, TLV62569DBV and W25Q128JVSIQ, with the IP5306, LM3880-1AC and TLV75518PDBV among its other parts. Its parts include 20 capacitors, 17 resistors, 9 ICs, 6 connectors and 3 inductors. It belongs with the FPGA and CPLD boards of this library.
Still in the early stages! Check back for more later!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Resistor_SMD:R_0603_1608Metric | C1, C6, C16 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R11, R12, R16 |
| 3 | 1uF | Resistor_SMD:R_0603_1608Metric | C5, C13, C14 |
| 3 | 33k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R10, R17 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C15, C19 |
| 2 | 10uF | LED_SMD:LED_0805_2012Metric | C2, C10 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C12, C17 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | 2.2uH | FPGBA:1206 (metric 2832) | L1, L3 |
| 2 | 22uF | Capacitor_SMD:C_1206_3216Metric | C8, C9 |
| 2 | 5.1k | Capacitor_SMD:C_0603_1608Metric | R5, R6 |
| 2 | SolderWirePad_1x01_SMD_1x2mm | Connector_Wire:SolderWirePad_1x01_SMD_1x2mm | B-, B+ |
| 1 | .1uF | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 180k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 1nF | Resistor_SMD:R_0603_1608Metric | C7 |
| 1 | 1uH | FPGBA:LPS4018 | L2 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | 2479774-2 | FPGBA:24797742 | J1 |
| 1 | 453k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | Cartridge Conn | AGBRE:AGB Cart Pin | J6 |
| 1 | Conn_01x06_Pin | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J3 |
| 1 | IP5306 | FPGBA:SOIC127P600X165-9N | IC1 |
| 1 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | LM3880 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | Left Daughter Connector | Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J4 |
| 1 | MAX98357A | Package_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U2 |
| 1 | Right Daughter Connector | Connector_FFC-FPC:Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal | J5 |
| 1 | Screen zif FFC/FPC | Connector_FFC-FPC:Hirose_FH12-32S-0.5SH_1x32-1MP_P0.50mm_Horizontal | J9 |
| 1 | Speaker | Connector_PinHeader_2.00mm:PinHeader_2x01_P2.00mm_Vertical | LS1 |
| 1 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | TLV75518PDBV | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | TPS22917DBV | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | TPS62822DLC | Package_SON:Texas_VSON-HR-8_1.5x2mm_P0.5mm | U7 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U5 |
| 1 | XC7S50-L1CSGA324I | Package_BGA:BGA-324_15x15mm_Layout18x18_P0.8mm | IC6 |
| 1 | test | TestPoint:TestPoint_Pad_1.0x1.0mm | vclk |

teejaytiger/FPGBA
Full overhaul of the GBA mainboard to free ourselves from supply chain death

teejaytiger/FPGBA
Full overhaul of the GBA mainboard to free ourselves from supply chain death

teejaytiger/FPGBA
Full overhaul of the GBA mainboard to free ourselves from supply chain death

teejaytiger/FPGBA
Full overhaul of the GBA mainboard to free ourselves from supply chain death

kitspace-forks/reform-kintex-som
This is the open hardware system-on-module featuring the Xilinx/AMD Kintex-7 FPGA (XC7K160T or XC7K325T) and 2GB DDR3 RAM.



hwkim3330/sfp-auto-ethernet
SFP modules that speak SGMII to the host and 100/1000BASE-T1, 1000BASE-T or 10BASE-T1S to the world (KiCad)

SaiSundarP/Smart-Rover-Safety-Telemetry-Module
24-hour embedded systems design challenge submission.


LakoMoor/open-pocket-gbc
Game Boy / Game Boy Color on the Sipeed Tang Nano 20K: HDMI, Pocket-style menu, ST7735 LCD, USB remote. Open-source FPGA toolchain only.

atricreations/Electronic-Dice-Roller
Repo containing all the neccessary files for the Electronic Dice Roller by Atricreations.
It measures 78.8 × 40 mm and has 4 copper layers, 1.6 mm thick.
60 parts, built around the XC7S50-L1CSGA324I, TLV62569DBV, W25Q128JVSIQ and IP5306. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the teejaytiger/FPGBA repository on GitHub, at the commit this page was made from: the board is Mainboard/_restore_backup_2026-07-22T16-07-43-759/Mainboard.kicad_pcb and its schematic FPGBA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask teejaytiger before reusing the design.