2 layers50 × 40 mm
2 layers
LED Controller
tedmyers/led_controller_kicadKiCad files for the LED Controller Project Group
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 33
- Pads
- 165
- Tracks, vias
- 282, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Feb 2016
- Updated
- 5 Mar 2016
Overview
LED Controller is an open-source printed circuit board by tedmyers, from the tedmyers/led_controller_kicad repository on GitHub. It is a 2-layer board with 43 parts on 33 nets, routed with 282 tracks and 24 vias.
It is built around the ATMEGA328P-PU, STS8DN3LLH5 and L7805CV. Its parts include 15 resistors, 7 connectors, 3 capacitors, 3 transistors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
STS8DN3LLH5
SOIC-8MOSFETsSTMicroelectronics
L7805CV
TO-2200℃~+125℃@(Tj) 1 1.5A 2V@(1A) 35V 5V 68dB@(120Hz) 8mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | LED_controller_footprints:SMD_1206 | R1, R2, R3, R4, R5, R6, R7, R10, R11, R12 |
| 5 | CONNECTOR | LED_controller_footprints:OUTPUT_HOLES | CON1, CON2, CON3, CON4, CON7 |
| 3 | 0 | LED_controller_footprints:SMD_1206 | R13, R14, R15 |
| 3 | Rotary_Encoder | LED_controller_footprints:Rotary_encoder | E1, E2, E3 |
| 3 | STS8DN3LLH5 | SMD_Packages:SO-8_PowerPAK_Vishay_Single | Q1, Q2, Q3 |
| 2 | 10uF | LED_controller_footprints:SMD_1206 | C1, C3 |
| 2 | LED | LEDs:LED-3MM | D1, D2 |
| 2 | Terminal_Block_2pin | LED_controller_footprints:Screw_Terminal | TB1, TB2 |
| 1 | .1uF | LED_controller_footprints:SMD_1206 | C2 |
| 1 | 499 | LED_controller_footprints:SMD_1206 | R9 |
| 1 | 820 | LED_controller_footprints:SMD_1206 | R8 |
| 1 | ATMEGA328P-P | Housings_DIP:DIP-28_W7.62mm_LongPads | IC1 |
| 1 | AVR-ISP-10 | Connect:IDC_Header_Straight_10pins | CON6 |
| 1 | FUSE | LED_controller_footprints:12V_PWR_HOLES | F1 |
| 1 | Heatsink_50x50mm | LED_controller_footprints:Heatsink_50x50mm | H1 |
| 1 | L7805CV | LED_controller_footprints:L7805CV | VR1 |
| 1 | PWR_CON | LED_controller_footprints:12V_PWR_HOLES | CON5 |
The 39 most common of 43 parts.
Questions
What parts does the LED Controller use?
43 parts, built around the ATMEGA328P-PU, STS8DN3LLH5 and L7805CV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Controller KiCad files?
From the tedmyers/led_controller_kicad repository on GitHub, at the commit this page was made from: the board is LED_Controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask tedmyers before reusing the design.
Similar boards
- 2 layers111.8 × 81.9 mm
- 2 layers77 × 52 mm
BackupProjects chepjune personal 3 20260226
Mitchkal/kicad
A repo of my kicd pcb projects
23 partsGPL-3.0 - 2 layers52.1 × 116.8 mm
DIY Uncertainty
oamodular/uncertainty
This readme needs to be updated to reflect this and to talk about the many other languages that people have used to create new firmware for Uncertainty.
67 parts43 - 2 layers55 × 90.8 mm
- 2 layers100 × 80 mm
- 2 layers377.2 × 318 mm
Three phase bridge
arcoslab/open-coroco-legacy
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.
105 parts6 - 2 layers127 × 91.5 mm
Accumulator Board
formulaslug/fs-3-schematics
Electrical Design Repository for fs-3 schematics and PCBs
110 parts5