2 layers90 × 94 mm
Amiga Drawbridge
tebl/Amiga-DrawBridge
A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also includes a version of Greaseweazle.
19 parts51
2 layers90 × 94 mm
Greaseweazle
tebl/Amiga-DrawBridge51A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also includes a version of Greaseweazle.
- Size
- 90 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 28
- Pads
- 154
- Tracks, vias
- 290, 36
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Oct 2021
- Updated
- 6 Jun 2024
Overview
Greaseweazle is an open-source printed circuit board by tebl, from the tebl/Amiga-DrawBridge repository on GitHub. It is a 2-layer board of 90 × 94 mm with 26 parts on 28 nets, routed with 290 tracks and 36 vias.
Its parts include 9 resistors, 6 connectors, 2 diodes and 1 transistor. It belongs with the retro computing and games boards and the STM32 boards of this library.
README
faceplates/Greaseweazle FB1/README.mdGreaseweazle FB1
A faceplate designed to be installed onto the main Greaseweazle-module, it has cutouts for the 34-pin and 26-pin IDC sockets as well as the LEDs found on the module. For a version that does not include the 26-pin Amstrad-centric connector, see Greaseweazle FA1 instead.
Note that as the faceplate will sit a bit higher up on the standoffs, the LEDs will need to be soldered around a millimeter above the board - the recommended way of installing them is to insert them into the footprint (longer pin in the round hole), install the faceplate and then solder the LEDs into place with the LED flush against the faceplate.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7, R8 |
| 4 | Mounting | mounting:M3_pin | M1, M2, M3, M4 |
| 1 | 1.5k** | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 100* | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 1k* | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | FDC_Amstrad | Connector_IDC:IDC-Header_2x13_P2.54mm_Vertical | J6 |
| 1 | FDC_PC | Connector_IDC:IDC-Header_2x17_P2.54mm_Vertical | J1 |
| 1 | LED_ACT | LED_THT:LED_D5.0mm | D2 |
| 1 | LED_PWR | LED_THT:LED_D5.0mm | D1 |
| 1 | PWR_DRV | pwr_drv:PWR_DRV | J3 |
| 1 | PWR_IN1 | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | PWR_IN2 | pwr_drv:PWR_IN | J4 |
| 1 | PWR_SEL | solder_bridge:select | JP2 |
| 1 | SS_DS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | STM32_Blue_Pill | stm32_blue_pill:STM32_Blue_Pill | A1 |
| 1 | USB_TTL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J5 |
The 25 most common of 26 parts.
More from tebl/Amiga-DrawBridge
1Similar boards
- 2 layers57.3 × 19 mm
- 2 layers98 × 59.5 mm
MCP23017 PCB
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
26 parts915 - 2 layers142.9 × 98.5 mm
- 2 layers86.1 × 86.1 mm
- 2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers20.3 × 34.8 mm
L0 ESP32
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
26 parts546MIT - 2 layers40.6 × 50.8 mm
WALTsm
google/walt
A device for measuring latency of physical sensors and outputs on phones and computers
26 parts474Apache-2.0 - 2 layers158.5 × 75 mm
Questions
How big is the Greaseweazle PCB?
It measures 90 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Greaseweazle use?
26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Greaseweazle KiCad files?
From the tebl/Amiga-DrawBridge repository on GitHub, at the commit this page was made from: the board is Greaseweazle/Greaseweazle.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Greaseweazle design in my own project?
Its repository states no licence, so its author keeps all rights: ask tebl before reusing the design.