Skip to the content
2 layers10.4 × 55.2 mmC64 SkeletonKey, the printed circuit board in 3D

C64 SkeletonKey

tebl/C64-JoyKEY27

WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

Size
10.4 × 55.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
11
Pads
43
Tracks, vias
36, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
3 Dec 2020
Updated
14 Jan 2025

Overview

C64 SkeletonKey is an open-source printed circuit board by tebl, from the tebl/C64-JoyKEY repository on GitHub. It is a 2-layer board of 10.4 × 55.2 mm with 5 parts on 11 nets, routed with 36 tracks and 0 vias.

It belongs with the retro computing and games and keyboards and input boards of this library.

README

README.md

C64 JoyKEY

The C64 JoyKEY was born out of the desire to build my own joystick, and after having a look at the various options available I chose to build one using Cherry MX keyboard switches. They are around a dollar per piece, so after getting it all to work properly on my beloved Commodore 64 I looked into using it with a whole selection of vintage computer systems as well. There are two main versions of the C64 JoyKEY, the keyboard-variant already described and a board designed for use with Sanwa arcade parts instead.

Last build Last arcade

With options to handle multiple types of systems comes complexity, you'll have to make a few decisions on what you want out of the C64 JoyKEY. Do I only want to use it as a joystick replacement on vintage systems, ideally with 2-3 fire buttons where supported? If so, then you won't need the Arduino Pro Micro.

Want to use it on a modern system as a WASD-style keyboard or a gamepad, then install it - a common use of these types of devices is as a macro-keyboard or a stream-deck. Note that compared to many similar solutions, the microcontroller is not required for use with any of the vintage systems - the adapters actually follow the original circuit descriptions for controllers used with the actual vintage computers. What that means is that there is truly no chance of lag added by the controller. Ever.

The pictures below show the unit when connected to my Commodore 64, including the jumper settings used with it. As I've tried to keep things as close to the standard usually associated with Atari-style joysticks, there are two joystick connectors - this is because a lot of the Commodore 64 games supported using a second joystick for specific game functions.

Commodore 64 C64 Configuration

As with most C64 games port 2 is the one to use, port 1 is just there to connect additional fire buttons. When in doubt, just connect a cable for port 2 and you should have a good time. This was labelled after the way the controller is used on the Commodore 64.

Getting one

I won't be selling these, so if you want one you will probably have to build it yourself (or call your favourite friend, ideally someone with a reasonable quality soldering iron). I've created a separate documents on building a C64 JoyKEY, this is also where you'll find the BOM for this project (a list of needed parts and links to where PCBs can be ordered).

As with all things you're soldering together by yourself, the one who soldered it takes responsibility for it. I'll try answer any opened tickets as far as I am able, but know that this is a hobby-grade project and I might be busy on spending the little energy I have on other things (be patient, check out the schematic while you wait).

Setting it up

The C64 JoyKEY has a handful of jumpers that need to be set correctly in order to: A - function, B - not destroy your precious vintage computer and/or consoles. The necessary details have been put into a separate configuration-document, check it out for some information on the systems I've attempted to use the C64 JoyKEY with.

Parts

5
QtyValueFootprintReferences
1F2_POLsolder_bridge:select_rJP1
1F3_POLsolder_bridge:select_rJP2
1FIRE3_SELsolder_bridge:select_rJP3
1KEY_LEDsolder_bridge:bridge_rJP7
1SkeletonKEYConnector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_VerticalJ3

More from tebl/C64-JoyKEY

12
  • 2 layers99.7 × 74.9 mmC64 Joykey 2040, the printed circuit board in 3D

    C64 Joykey 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    69 parts27
  • 2 layers99.7 × 74.9 mmC64 Joykey, the printed circuit board in 3D

    C64 Joykey

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    62 parts27
  • 2 layers99.7 × 55.2 mmC64 Arcade, the printed circuit board in 3D

    C64 Arcade

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    49 parts27
  • 2 layers58.4 × 38.1 mmAmiga CD32, the printed circuit board in 3D

    Amiga CD32

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    30 parts27
  • 2 layers81.9 × 52.7 mmArcade 2040, the printed circuit board in 3D

    Arcade 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    29 parts27
  • 2 layers58.4 × 38.1 mmNEC PC Engine, the printed circuit board in 3D

    NEC PC Engine

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    26 parts27
  • 2 layers58.4 × 43.8 mmGameport, the printed circuit board in 3D

    Gameport

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    24 parts27
  • 2 layers70.7 × 46.7 mmAdapter 9 from 2040, the printed circuit board in 3D

    Adapter 9 from 2040

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    21 parts27
  • 2 layers58.4 × 38.1 mmSega Mega Drive, the printed circuit board in 3D

    Sega Mega Drive

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    21 parts27
  • 2 layers58.4 × 38.1 mmNES, the printed circuit board in 3D

    NES

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    20 parts27
  • 2 layers29.2 × 31.8 mmAtari 7800, the printed circuit board in 3D

    Atari 7800

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    10 parts27
  • 2 layers29.2 × 18.4 mmSega Master System, the printed circuit board in 3D

    Sega Master System

    tebl/C64-JoyKEY

    WASD-style joystick for vintage computers. With an added Arduino Pro Micro you can use it as a USB-keyboard, so if you wanted a DIY streamdeck or Macro-keyboard - then the C64 JoyKEY can do that as well.

    4 parts27

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the C64 SkeletonKey PCB?

It measures 10.4 × 55.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the C64 SkeletonKey use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the C64 SkeletonKey KiCad files?

From the tebl/C64-JoyKEY repository on GitHub, at the commit this page was made from: the board is C64 SkeletonKey/C64 SkeletonKey.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the C64 SkeletonKey design in my own project?

Its repository states no licence, so its author keeps all rights: ask tebl before reusing the design.