

TEACar motor controller
This repo contains the KiCAD files of the schematic and PCB layout for the TEACar BLDC motor controller
- Size
- 120.1 × 59.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 145
- Nets
- 94
- Pads
- 360
- Tracks, vias
- 809, 244
- Pours
- 29
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 24 Apr 2026
- Updated
- 24 Apr 2026
Overview
TEACar motor controller is an open-source printed circuit board by TEALab-UF, from the TEALab-UF/bldc_esc_pcb repository on GitHub. It is a 4-layer board of 120.1 × 59.2 mm with 145 parts on 94 nets, routed with 809 tracks and 244 vias.
It is built around the STSPIN32G4, STT6N3LLH6 and STD44N4LF6, with the STPS0530Z and M20-9990246 among its other parts. Its parts include 59 resistors, 30 capacitors, 8 diodes, 7 connectors and 6 transistors. It belongs with the robots and motor control boards of this library.
Main components
5STSPIN32G4
VFQFPN-64(9x9)-40℃~+125℃ 1A 3 5.5V~15V I2C、SPI、UART、CAN No Three Phase VFQFPN-64(9x9) Brushless DC (BLDC) Motor Driver ROHSSTMicroelectronicsIntelligent Power Modules (IPM)STT6N3LLH6
SOT-23-6-55℃~+150℃ 1 N-channel 2.5V 2W 30V 32mΩ@4.5V 32pF 345pF 4.1nC@4.5V 55pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETsSTD44N4LF6
DPAKMOSFETsSTMicroelectronicsSTPS0530Z
SOD-123-40℃~+150℃ 1 Independent 130uA@30V 30V 430mV@500mA 5.5A 500mA SOD-123 Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesM20-9990246
插件,P=2.54mm-40℃~+105℃ 1 2.54mm 2.54mm 2P 3A 3mm 6.1mm Black Brass Pin Header Through Hole Tin 插件,P=2.54mm Pin Headers ROHSHarwinPin Headers
README
README.mdTEACar BLDC Motor Controller
This repository contains the KiCad schematic and PCB design files for the TEACar BLDC motor controller.
Contents
- Schematic design
- PCB layout
- Supporting design files
Bill of Materials (BOM)
The BOM can be found in the BOM/ folder.
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8 |
| 8 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 7 | BAT30K | footprints:SOD-523_STM | CR1, CR2, CR3, CR4, CR7, CR8, CR9 |
| 6 | 1.5k | Resistor_SMD:R_0603_1608Metric | R22, R25, R27, R28, R32, R33 |
| 6 | 100 | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R14, R15 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C5, C7, C9, C10, C13, C28 |
| 6 | 22k | Resistor_SMD:R_0603_1608Metric | R23, R24, R29, R30, R34, R35 |
| 6 | 33 | Resistor_SMD:R_0603_1608Metric | R20, R21, R56, R57, R58, R59 |
| 6 | BAT48J | Diode_SMD:D_SOD-323 | D2, D3, D4, D5, D6, D7 |
| 6 | STD44N4LF6 | footprints:DPAKTO-252_STM | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 4 | 220n | Capacitor_SMD:C_0805_2012Metric | C2, C11, C16, C18 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R9, R49, R50, R51 |
| 3 | 10m | Resistor_SMD:R_2512_6332Metric | R16, R17, R18 |
| 3 | 11k | Resistor_SMD:R_0603_1608Metric | R26, R31, R36 |
| 3 | 1n | Capacitor_SMD:C_0603_1608Metric | C25, C26, C27 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C3, C17 |
| 3 | 220u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C22, C23, C24 |
| 3 | 27k | Resistor_SMD:R_0603_1608Metric | R38, R41, R44 |
| 3 | 3.9k | Resistor_SMD:R_0603_1608Metric | R39, R42, R45 |
| 3 | 330 | Resistor_SMD:R_0603_1608Metric | R46, R47, R48 |
| 3 | 4.7k | Resistor_SMD:R_0805_2012Metric | R19, R52, R53 |
| 3 | 68k | Resistor_SMD:R_0603_1608Metric | R37, R40, R43 |
| 3 | 82n | Capacitor_SMD:C_0603_1608Metric | C19, C20, C21 |
| 3 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2, NT3 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric | C4, C12 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C6, C8 |
| 2 | 33n | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 6.8p | Capacitor_SMD:C_0402_1005Metric | C29, C30 |
| 2 | Conn_01x03_Pin | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2, J7 |
| 2 | STPS0530Z | footprints:SOD-123_STM | CR5, CR6 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R55 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | 200 | Resistor_SMD:R_0603_1608Metric | R54 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 24.000MHZ | footprints:XTAL_ABM11W-48.0000MHZ-7-D1X-T3 | Y1 |
| 1 | 3.01k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 6.8u | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 72.3k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | B6B-ZR_LF__SN_ | Connector_JST:JST_ZH_B6B-ZR_1x06_P1.50mm_Vertical | J4 |
| 1 | Conn_01x02_Pin | Connector_Wire:SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm | J3 |
| 1 | Conn_01x03_Pin | Connector_Wire:SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mm | J5 |
| 1 | Conn_01x06_Pin | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J6 |
| 1 | LOGO | LOGO | G*** |
| 1 | M20-9990246 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J1 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D8 |
| 1 | STSPIN32G4 | footprints:QFN_IN32G4_STM | U2 |
| 1 | STT6N3LLH6 | footprints:SOT_6N3LLH6_STM | U8 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | YELLOW | LED_SMD:LED_0805_2012Metric | D1 |
Similar boards
- 2 layers100 × 50 mm

- 2 layers132.5 × 38 mm

Emfi
Ledger-Donjon/silicon-toaster
SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:
81 parts60LGPL-3.0 - 2 layers30 × 43 mm

Hayashi light control
Ledger-Donjon/hayashi-light-remote
USB remote control dongle for Hayashi LA-150CE halogen lamp
34 parts2 - 4 layers82 × 55 mm

Spark
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
202 parts1 - 4 layers45 × 35 mm

- 4 layers34 × 63 mm

STSPIN32G4 V2
Scouttman/ZombieServo
Motor Driver for some aliexpress robotic serovos powered by simpleFOC and a STSPIN32g4
91 parts6 - 4 layers125 × 80 mm

- 4 layers

Questions
How big is the TEACar motor controller PCB?
It measures 120.1 × 59.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the TEACar motor controller use?
145 parts, built around the STSPIN32G4, STT6N3LLH6, STD44N4LF6 and STPS0530Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TEACar motor controller KiCad files?
From the TEALab-UF/bldc_esc_pcb repository on GitHub, at the commit this page was made from: the board is TEACar_motor_controller.kicad_pcb and its schematic MCU_and_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TEACar motor controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask TEALab-UF before reusing the design.