2 layers128 × 88 mm
Fireball revD
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
64 parts223
2 layers
Smd pen
tdarlic/smd_pen2Pick and Place Pen
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 41
- Pads
- 152
- Tracks, vias
- 236, 4
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Jul 2016
- Updated
- 7 Jul 2016
Overview
Smd pen is an open-source printed circuit board by tdarlic, from the tdarlic/smd_pen repository on GitHub. It is a 2-layer board with 65 parts on 41 nets, routed with 236 tracks and 4 vias.
It is built around the LM317AEMP, LM555N and MBRS540T3G-FS, with the BC847, BC817-40 and SS34 among its other parts. Its parts include 20 resistors, 11 connectors, 9 capacitors, 5 diodes and 3 ICs.
Main components
6
LM317AEMP
SOT-223-4-40℃~+125℃@(Tj) 0.003%Vout 1 1.2V~37V 1A 40V 50uA 65dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM555N
DIP-80℃~+70℃ 4.5V~16V DIP-8 555 Timers / Counters ROHSHGSEMITimers / Counters
MBRS540T3G-FS
SMC(DO-214AB)-65℃~+150℃ 190A 300uA@40V 40V 500mV@5A 5A Independent SMC(DO-214AB) Schottky Diodes ROHSFUXINSEMISchottky Diodes
BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BC817-40
SOT-23-65℃~+150℃ 1 NPN 100MHz 100nA 250 345mW 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdsmd_pen
Pick and Place Pen Kicad Repository
Videos of development can be found on following links: (1) https://youtu.be/k6m5PAlaBAs (2) https://youtu.be/d-iJDVw1978 (3) https://youtu.be/Q16PoXZDJyo (4) https://youtu.be/s9xIzmQ8K6c
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0R | Resistors_SMD:R_1206_HandSoldering | R6, R7, R8, R9, R15 |
| 4 | 1k | Resistors_SMD:R_1206 | R10, R11, R12, R13 |
| 4 | 1k | Resistors_SMD:R_1206_HandSoldering | R2, R3, R5, R17 |
| 4 | HOLE | Local:Mounting_hole_r3 | H1, H2, H3, H4 |
| 4 | TST | Local:S1751-46R | P6, P7, P8, P9 |
| 3 | 100R | Resistors_SMD:R_1210 | R18, R19, R20 |
| 3 | MBRS540T3G | Local:MBRS540T3G | D2, D3, D4 |
| 2 | 10u | Capacitors_SMD:c_elec_6.3x7.7 | C3, C8 |
| 2 | 1u | Capacitors_SMD:c_elec_4x4.5 | C2, C9 |
| 2 | BC847 | Housings_SOT-23_SOT-143_TSOT-6:SOT23 | Q1, Q3 |
| 2 | CP | Capacitors_SMD:c_elec_6.3x7.7 | C6, C7 |
| 2 | FOOT_SWITCH | Pin_Headers:Pin_Header_Straight_1x02 | P2, P3 |
| 2 | R | Resistors_SMD:R_1206_HandSoldering | R14, R16 |
| 2 | SOLENOID | Local:SOLENOID_6V_EBAY_1 | S1, S2 |
| 1 | 10U | Capacitors_SMD:c_elec_6.3x7.7 | C4 |
| 1 | 10n | Capacitors_SMD:C_1206_HandSoldering | C5 |
| 1 | 1N4148 | Local:1N4148_SMD | D1 |
| 1 | 220k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 220u | Capacitors_SMD:c_elec_6.3x7.7 | C1 |
| 1 | 3.3k | Resistors_SMD:R_1206_HandSoldering | R4 |
| 1 | BC817-40 | Housings_SOT-23_SOT-143_TSOT-6:SOT23 | Q2 |
| 1 | Buck_regulator_module_6V | Local:BUCK_REG_6V_EBAY | U2 |
| 1 | CONN_01X02 | Local:TERMBLOCK2_5MM | P1 |
| 1 | F_Small | Local:FUSE_15_MM_THPCB | F1 |
| 1 | Foot on LED | Pin_Headers:Pin_Header_Straight_1x03 | P5 |
| 1 | JUMPER | Local:JUMER_LONG | JP1 |
| 1 | LM317AEMP | Local:SOT-223_LM317 | U1 |
| 1 | LM555N | SOIC_Packages:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | POWER_ON | Local:TERMBLOCK2_5MM | P10 |
| 1 | PUMP | Local:VACUUM_PUMP_6V_EBAY_1 | M1 |
| 1 | Power on LED | Pin_Headers:Pin_Header_Straight_1x03 | P11 |
| 1 | Reduced voltage LED | Pin_Headers:Pin_Header_Straight_1x03 | P4 |
| 1 | Relay_2PDT | Local:SCHRACK_RP310006 | RY1 |
| 1 | SS34 | Diodes_SMD:Diode-SMC_Standard | D5 |
The 61 most common of 65 parts.
Questions
What parts does the Smd pen use?
65 parts, built around the LM317AEMP, LM555N, MBRS540T3G-FS and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Smd pen KiCad files?
From the tdarlic/smd_pen repository on GitHub, at the commit this page was made from: the board is SMD_pen.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Smd pen design in my own project?
Its repository states no licence, so its author keeps all rights: ask tdarlic before reusing the design.
Similar boards
- 2 layers55 × 55 mm
LeafNode v3.1
leafai-io/leaf-node-v3.x
Modular node for sensor monitoring and device control in grow environments.
91 parts47 - 2 layers95.9 × 90.2 mm
- 2 layers50 × 100 mm
ActiveLoad
ahessling/ActiveLoad
Small 12 Watt Active Load (dummy load) with STM32 microcontroller
83 parts5MIT - 2 layers100 × 80 mm
- 2 layers91.1 × 66 mm
Nano Breakout V1
Kokiri-AK/tools_nano-breakout
Arduino Nano sensor breakout board. Useful for a variety of simple prototyping needs.
24 partsCERN-OHL-P-2.0 - 4 layers182 × 73 mm
Trainbuttons left board
RavuAlHemio/trainbuttons
Two boards providing buttons for controlling a train (simulator).
47 partsCC0-1.0 - 2 layers120 × 70 mm
BRNG
valerionew/Banana-Random-Number-Generator
Random number generator based on radioactivity from bananas
93 parts37