Skip to the content
1234

LM317AEMP

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 0.003%Vout 1 1.2V~37V 1A 40V 50uA 65dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/LM317AEMP
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223-4
Pins
4
In stock
819 at JLCPCB (C33586)
Used on
5 open-source boards

Overview

The LM317AEMP is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-223-4 package with 4 pins. -40℃~+125℃@(Tj) 0.003%Vout 1 1.2V~37V 1A 40V 50uA 65dB@(120Hz) Adjustable Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive SOT-223-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulators:REG3+1 1ADJ-2OUT-3IN+4OUT, from CERN's library) and its footprint (ICs And Semiconductors SMD:SOT230P700X180-4N, from CERN's library), ready for a KiCad board. 819 are in stock at JLCPCB (part C33586). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

3IN1ADJ2OUT4OUT
Regulators:REG3+1 1ADJ-2OUT-3IN+4OUTFrom CERN's library

Footprint

1234
ICs And Semiconductors SMD:SOT230P700X180-4NFrom CERN's library

Pinout

4
The pins of the LM317AEMP
PinNameType
1ADJPower in
2OUTPower in
3INInput
4OUTPower in

Open-source boards using it

5
  • 2 layers50 × 100 mmActiveLoad, the printed circuit board in 3D

    ActiveLoad

    ahessling/ActiveLoad

    Small 12 Watt Active Load (dummy load) with STM32 microcontroller

    83 parts5MIT
  • 2 layersSmd pen, the printed circuit board in 3D

    Smd pen

    tdarlic/smd_pen

    Pick and Place Pen

    65 parts2
  • 2 layers100 × 80 mmFreq shifter, the printed circuit board in 3D

    Freq shifter

    a5632645/freq-shifter

    analog dome filter based freq shifter(incomplete)

    324 parts
  • 2 layers91.1 × 66 mmNano Breakout V1, the printed circuit board in 3D

    Nano Breakout V1

    Kokiri-AK/tools_nano-breakout

    Arduino Nano sensor breakout board. Useful for a variety of simple prototyping needs.

    24 partsCERN-OHL-P-2.0
  • 4 layers182 × 73 mmTrainbuttons left board, the printed circuit board in 3D

    Trainbuttons left board

    RavuAlHemio/trainbuttons

    Two boards providing buttons for controlling a train (simulator).

    47 partsCC0-1.0

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the LM317AEMP?

Yes. The symbol is Regulators:REG3+1 1ADJ-2OUT-3IN+4OUT and the footprint ICs And Semiconductors SMD:SOT230P700X180-4N, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM317AEMP?

SOT-223-4, with 4 pins. Its footprint is drawn on this page.

Where is the LM317AEMP datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM317AEMP?

JLCPCB lists it as part C33586, with 819 in stock; the sellers' links on this page open their listings.

What can replace the LM317AEMP?

Parts like it in the library: the LM317EMP by Texas Instruments and the LM337IMP by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM317AEMP?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.