

PCB Controller
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 29
- Pads
- 121
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Jun 2026
- Updated
- 26 Jun 2026
Overview
PCB Controller is an open-source printed circuit board by Taran-the-Idiot, from the Taran-the-Idiot/Flippy repository on GitHub, published under the MIT licence. It is a 2-layer board with 15 parts on 29 nets.
It is built around the MCP23017-E/SS. Its parts include 3 connectors, 2 resistors, 1 capacitor, 1 IC and 1 switch.
Main components
1README
README.mdFlippy
Custom Flip dot
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | ~ | Taranium-libs:3P_Bridge | B1, B2, B3 |
| 2 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1, J3 |
| 1 | 100nf | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C32 |
| 1 | 10k | Resistor_SMD:R_01005_0402Metric | R1 |
| 1 | 300 | Resistor_SMD:R_01005_0402Metric | R2 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | MCP23017 | Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm | U6 |
| 1 | SW_Push | Taranium-libs:C720477 | SW1 |
More from Taran-the-Idiot/Flippy
2- 2 layers

- 2 layers68 × 17 mm

Similar boards
- 2 layers126.6 × 21.4 mm

ADBv2
mattchesters/zmk-apple-desktop-bus-keyboard
ZMK shield for Apple Desktop Bus Keyboard
17 parts168MIT - 2 layers40 × 100 mm

Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0 - 2 layers182.8 × 158.9 mm

ErgoDone
ktec-hq/ErgoDone
ErgoDox using pro micro. Original work by Dox. Brainhole association present
152 parts123GPL-3.0 - 2 layers100 × 100 mm

- 2 layers137.5 × 78.5 mm

Cntrlr Turnout
djbristow/RAILS
RAILS is a software model and implementation of an automated system to assist the model railroader achieve realism in the operation of a model railroad. The model then drives the development of software.
12 parts19 - 2 layers176 × 82.6 mm

- 2 layers115 × 57.2 mm

- 2 layers100 × 49.7 mm

Questions
What parts does the PCB Controller use?
15 parts, built around the MCP23017-E/SS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB Controller KiCad files?
From the Taran-the-Idiot/Flippy repository on GitHub, at the commit this page was made from: the board is PCB-Controller/PCB-Controller.kicad_pcb and its schematic PCB-Controller/PCB-Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB Controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).