
RP HAT Splitter2
tankhunter8192/Electronic_Designs
Collection of Electronic Scemetics and PCB Designs

Collection of Electronic Scemetics and PCB Designs
RP HAT Splitter is an open-source printed circuit board by tankhunter8192, from the tankhunter8192/Electronic_Designs repository on GitHub, published under the MIT licence. It is a 4-layer board of 65 × 56 mm with 41 parts on 53 nets, routed with 435 tracks and 35 vias.
It is built around the PCA9548ARGE and CAT24C256LI. Its parts include 19 resistors, 15 connectors and 2 ICs.
Collection of Electronic Scemetics and PCB Designs
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R103, R104, R105, R106, R107, R108, R109, R110, R111, R112, R113, R114, R115, R116, R117, R118 +1 |
| 6 | I2C1-Normal | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J104, J107, J110, J113, J114, J115 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H101, H102, H103, H104 |
| 2 | 3.9k | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R101, R102 |
| 1 | CAT24C256 | SamacSys:SOIC127P600X175-8M | U101 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J101 |
| 1 | I2C1-Multi0 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J102 |
| 1 | I2C1-Multi1 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J105 |
| 1 | I2C1-Multi2 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J108 |
| 1 | I2C1-Multi3 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J111 |
| 1 | I2C1-Multi4 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J112 |
| 1 | I2C1-Multi5 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J109 |
| 1 | I2C1-Multi6 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J106 |
| 1 | I2C1-Multi7 | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J103 |
| 1 | ID_WP | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels | JP101 |
| 1 | PCA9548ARGE | Package_DFN_QFN:Texas_RGE0024C_EP2.1x2.1mm | U102 |

tankhunter8192/Electronic_Designs
Collection of Electronic Scemetics and PCB Designs

tankhunter8192/Electronic_Designs
Collection of Electronic Scemetics and PCB Designs

Les-opossums/ELE_PAMI_2027
This repository contains the hardware design files for the PAMI2027A1 PCB (Rev A1), designed using KiCad 10.






eamars/RaspberryPi-Pico-Motor-Expansion-Board
A raspberry pi pico expansion board designed for OpenTrickler project
nullstalgia/NullWiiCon
AVR Firmware to convert Nintendo Extension port controllers to USB for use on Switch and PC
It measures 65 × 56 mm and has 4 copper layers, 1.6 mm thick.
41 parts, built around the PCA9548ARGE and CAT24C256LI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tankhunter8192/Electronic_Designs repository on GitHub, at the commit this page was made from: the board is Splitter/RP-HAT-Splitter/RP-HAT-Splitter.kicad_pcb and its schematic PowerDistributionXT60/PowerDistributionXT60/PowerDistributionXT60.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).