

Zf vga
Homebrew Z80 hobby computer
- Size
- 143 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 133
- Pads
- 430
- Tracks, vias
- 845, 146
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Mar 2021
- Updated
- 4 Oct 2026
Overview
Zf vga is an open-source printed circuit board by tangent3D, from the tangent3D/Z-FIGHTER repository on GitHub, published under the MIT licence. It is a 2-layer board of 143 × 85 mm with 62 parts on 133 nets, routed with 845 tracks and 146 vias.
It is built around the 74HC541D, 74HC00D and 74HC04D, with the 74HC165D, 74HC74D and BC547 among its other parts. Its parts include 22 capacitors, 14 ICs, 10 resistors, 4 connectors and 2 crystals. It belongs with the FPGA and CPLD boards of this library.
Main components
674HC541D
SO-20-300mil-40℃~+125℃ 1 12ns@4.5V,50pF 160uA 2V~6V 7.8mA 7.8mA 74HC 8 Output enable Tri-State Unidirectional SO-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers74HC00D
SOP-14-40℃~+125℃ 1.5V、3.15V、4.2V 1.9V、3.7V、5.9V 100mV、400mV、400mV 2 2V~6V 4 40uA 5.2mA 5.2mA 500mV~1.8V 74HC Series 7ns@6V,50pF NAND Gate SOIC-14 Logic Gates ROHSNexperiaLogic Gates74HC04D
SOP-14-40℃~+125℃ 1 1.5V~4.2V 1.9V、3.7V、5.2V 100mV、400mV、400mV 14ns@6V,50pF 2V~6V 2uA 5.2mA 5.2mA 500mV~1.8V 6 74HC SOIC-14 Inverters ROHSNexperiaInverters74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip FlopsBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
README
readme.mdDescription
Z-FIGHTER is a Z80 hobby computer loosely based on Grant Searle's CP/M on breadboard project. As a fully assembled unit in its custom 3D-printed enclosure, Z-FIGHTER has a handheld-style form factor with front panel accessories intended for user-created software and games. Connected via serial to a computer or terminal, Z-FIGHTER can be used to enjoy a full CP/M 2.2 environment or Microsoft BASIC in ROM. Finally, a parallel port and external CPU control pins are provided to the user for hardware hacking and expansion.
Specifications
- Z80 CPU @ 7.3728MHz
- CompactFlash interface for CP/M 2.2 operating system and file storage
- Z80 SIO/0 with dual 115200 bps RS-232 ports
- Jumper-selectable optional clock oscillator (X2) for SIO/0 port B (e.g. 614.4 KHz/64 for 9600 bps)
- Jumper-selectable RS-232 CTS flow control
- i8255 PPI-based parallel port reserved for front panel accessory daughterboard
- i8255 PPI-based user parallel port
- 512K ROM with external DIP-3 switches for manual ROM paging and ATF22V10C SPLD for memory map customization
- USB type-B power connector
- DS1233 supervisory circuit
- Optional jumpers to supply +5V to pin 9 on RS-232 ports (non-standard, for use at user's own risk)
- External CPU control header exposing #INT, #NMI, #WAIT, #RESET, system clock and SIO Ch. B clock signals
Accessory board specifications
- 8x Cherry MX key switches
- ST7920 128x64 LCD module with software-controllable backlight
- Electromagnetic buzzer (CPU-controlled)





Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 0.1uF | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 |
| 5 | 470pF | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C2, C3, C6, C7 |
| 5 | 74HC541 | Package_DIP:DIP-20_W7.62mm_LongPads | U5, U6, U12, U13, U14 |
| 5 | 75Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6, R7, R8 |
| 4 | MountingHole_3.2mm_M3_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | Mount1, Mount2, Mount3, Mount4 |
| 3 | 220Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | 1KΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10 |
| 2 | 22pF | Capacitor_THT:C_Disc_D7.5mm_W2.5mm_P5.00mm | C4, C5 |
| 2 | 4040 | Package_DIP:DIP-16_W7.62mm_LongPads | U1, U2 |
| 2 | DB9_Male | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J4, J5 |
| 2 | GAL16V8 | Package_DIP:DIP-20_W7.62mm_LongPads | U3, U4 |
| 1 | |||
| 1 | 74HC00 | Package_DIP:DIP-14_W7.62mm_LongPads | U7 |
| 1 | 74HC04 | Package_DIP:DIP-14_W7.62mm_LongPads | U8 |
| 1 | 74HC165 | Package_DIP:DIP-16_W7.62mm_LongPads | U10 |
| 1 | 74HC74 | Package_DIP:DIP-14_W7.62mm_LongPads | U9 |
| 1 | AS6C6264 | Package_DIP:DIP-28_W7.62mm_LongPads | U11 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | CXO_DIP14 | Oscillator:Oscillator_DIP-8_LargePads | X1 |
| 1 | CXO_DIP14 | Oscillator:Oscillator_DIP-14_LargePads | X1 |
| 1 | DB15_Female | zf_vga:L77HDE15SD1CH4FVGA | J3 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LOGO | zf_vga:Tangent_Head | G*** |
| 1 | LOGO | zf_vga:Z-FIGHTER_Logo | G*** |
| 1 | SW_DIP_x03 | Package_DIP:DIP-6_W7.62mm_LongPads | SW1 |
| 1 | Z-FIGHTER Expansion Port | Z-FIGHTER:Z-FIGHTER_Expansion_Port | J2 |
More from tangent3D/Z-FIGHTER
7- 2 layers100 × 150 mm

- 2 layers100 × 75 mm

- 2 layers40 × 31 mm

- 2 layers55.9 × 38.1 mm

- 2 layers100 × 50 mm

- 2 layers16.5 × 41 mm

- 2 layers27 × 53.3 mm

Similar boards
- 2 layers299.7 × 198.1 mm

Cisc-8
nailed-barnacle/Cisc-8-ttl-processor
A cut-down version of the 8080 processor using HCTTL and including a discrete ALU and instruction decoder
319 parts1MIT - 2 layers219 × 88 mm

- 2 layers200 × 150 mm

- 2 layers99.7 × 99.7 mm

- 4 layers88.9 × 43.2 mm

- 4 layers271.8 × 147.3 mm

- 2 layers233.4 × 280 mm

- 2 layers165 × 135 mm

Questions
How big is the Zf vga PCB?
It measures 143 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Zf vga use?
62 parts, built around the 74HC541D, 74HC00D, 74HC04D and 74HC165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zf vga KiCad files?
From the tangent3D/Z-FIGHTER repository on GitHub, at the commit this page was made from: the board is hardware/peripherals/vga/module/kicad/zf_vga.kicad_pcb and its schematic hardware/peripherals/usb_serial_power_module/KiCad/usb_serial_power_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zf vga design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).