6 layers89 × 69 mm
2 layers111 × 275 mm
TouchSensor
tamapochi1/DigitalViolin2- Size
- 111 × 275 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 45
- Pads
- 179
- Tracks, vias
- 330, 41
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Aug 2018
- Updated
- 15 Jul 2019
Overview
TouchSensor is an open-source printed circuit board by tamapochi1, from the tamapochi1/DigitalViolin repository on GitHub. It is a 2-layer board of 111 × 275 mm with 54 parts on 45 nets, routed with 330 tracks and 41 vias.
It is built around the R5F51303ADFN#10, TS20 and ADP124ARHZ-3.3-R7, with the DSC1001CL5-008.0000T among its other parts. Its parts include 34 connectors, 10 capacitors, 3 resistors, 2 ICs and 1 inductor.
Main components
4
R5F51303ADFN#10
LQFP-80(12x12)-40℃~+85℃ 1.8V~5.5V 10KB 12bit 32 Bit 32MHz 64KB 68 8KB 8bit Built-in FLASH RX LQFP-80(12x12) Microcontrollers (MCU/MPU/SOC) ROHSRenesas ElectronicsMicrocontrollers (MCU/MPU/SOC)
TS20
TSSOP-28-20℃~+75℃ 2.5V~5V 20 85uA 8kV 9uA Capacitive Touch、PWM Control、自动灵敏度校准、集成LED驱动器 TSSOP-28 Touch Sensors ROHSAD SemiconTouch Sensors
ADP124ARHZ-3.3-R7
TSSOP-8-EP-3.0mm-40℃~+125℃ 1 230mV@(500mA) 3.3V 5.5V 500mA 55uVrms 60dB@(100kHz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive TSSOP-8-EP-3.0mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
DSC1001CL5-008.0000T
SMD3225-4P-40℃~+105℃ 1.8V~3.3V 6.3mA 8MHz CMOS ±10ppm SMD3225-4P Programmable Oscillators ROHSMicrochip TechnologyProgrammable Oscillators
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1u | Capacitors_SMD:C_0603_HandSoldering | C2, C3, C5, C8, C9, C10 |
| 3 | 4.7k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3 |
| 3 | 4.7u | Capacitors_SMD:C_0603_HandSoldering | C1, C4, C6 |
| 2 | TS33 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J30, J31 |
| 1 | 10n | Capacitors_SMD:C_0603_HandSoldering | C7 |
| 1 | ADP124ARHZ-3.3-R7 | KiCad_Footprints:8-MSOP-EP_0.65mm | U1 |
| 1 | BLM18KG331BH1D | Inductors_SMD:L_0603_HandSoldering | L1 |
| 1 | Conn_JTAG | KiCad_Footprints:JTAG | P2 |
| 1 | Conn_Universal | Pin_Headers:Pin_Header_Angled_2x05_Pitch2.54mm | P1 |
| 1 | DSC1001CL5-008.0000T | KiCad_Footprints:4-CDFN_3.2x2.5mm | O1 |
| 1 | LOGO | KiCad_Footprints:electrode | G*** |
| 1 | R5F51303ADFN | KiCad_Footprints:QFP-80_12x12_Pitch0.5mm | U2 |
| 1 | TS0 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J1 |
| 1 | TS1 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J2 |
| 1 | TS10 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J11 |
| 1 | TS11 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J12 |
| 1 | TS12 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J13 |
| 1 | TS13 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J14 |
| 1 | TS14 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J15 |
| 1 | TS15 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J16 |
| 1 | TS16 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J17 |
| 1 | TS17 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J18 |
| 1 | TS18 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J19 |
| 1 | TS19 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J20 |
| 1 | TS2 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J3 |
| 1 | TS20 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J21 |
| 1 | TS21 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J22 |
| 1 | TS22 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J23 |
| 1 | TS27 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J24 |
| 1 | TS28 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J25 |
| 1 | TS29 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J26 |
| 1 | TS3 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J4 |
| 1 | TS30 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J27 |
| 1 | TS31 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J28 |
| 1 | TS32 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J29 |
| 1 | TS34 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J32 |
| 1 | TS4 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J5 |
| 1 | TS5 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J6 |
| 1 | TS6 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J7 |
| 1 | TS7 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J8 |
| 1 | TS8 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J9 |
| 1 | TS9 | Wire_Pads:SolderWirePad_single_0-8mmDrill | J10 |
The 52 most common of 54 parts.
More from tamapochi1/DigitalViolin
2- 6 layers
Similar boards
- 4 layers29 × 93.3 mm
Smart penetrometer
ARTS-Laboratory/SPECIES
Design and development of a deployable UAV smart penetrometer
34 parts6CC-BY-SA-4.0 - 2 layers88.9 × 63.5 mm
Picotouch drumcard
todbot/picotouch_drumcard
Card-sized drum synth / sequencer with MIDI In/Out
80 parts7GPL-3.0 - 2 layers180 × 110 mm
- 2 layers114.3 × 59.7 mm
- 4 layers158.4 × 66 mm
- 2 layers296.5 × 175.3 mm
- 2 layers203 × 26.6 mm
- 2 layers30 × 50 mm
Questions
How big is the TouchSensor PCB?
It measures 111 × 275 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TouchSensor use?
54 parts, built around the R5F51303ADFN#10, TS20, ADP124ARHZ-3.3-R7 and DSC1001CL5-008.0000T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TouchSensor KiCad files?
From the tamapochi1/DigitalViolin repository on GitHub, at the commit this page was made from: the board is TouchSensor/PCB/TouchSensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TouchSensor design in my own project?
Its repository states no licence, so its author keeps all rights: ask tamapochi1 before reusing the design.