Skip to the content
PCBKitNew board
ADP124ARHZ-3.3-R7 on a board, in 3D

ADP124ARHZ-3.3-R7

Analog Devices

-40℃~+125℃ 1 230mV@(500mA) 3.3V 5.5V 500mA 55uVrms 60dB@(100kHz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive TSSOP-8-EP-3.0mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Extended
DatasheetJLCPCBLCSCadi/ADP124ARHZ-3.3-R7
Category
Voltage Regulators Linear, Low Drop Out (LDO) Regulators
Package
TSSOP-8-EP-3.0mm
Pins
9

Overview

The ADP124ARHZ-3.3-R7 is a voltage Regulators Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSSOP-8-EP-3.0mm package with 9 pins. -40℃~+125℃ 1 230mV@(500mA) 3.3V 5.5V 500mA 55uVrms 60dB@(100kHz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive TSSOP-8-EP-3.0mm Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (agg-kicad:ADP124, from Agg-kicad) and its footprint (agg:MSOP-8-EP-AD, from Agg-kicad), ready for a KiCad board. 186 are in stock at JLCPCB (part C69505). 6 open-source boards in 2 repositories on GitHub use it.

Symbol

VIN8VIN7EN5NC6VOUT1VOUT2SENSE3GND4GNDEP
agg-kicad:ADP124From Agg-kicad

Footprint

12345678EPEPEPEPEP
agg:MSOP-8-EP-ADFrom Agg-kicad

Parameters

12
Features
Built-in soft-start
Noise
55uVrms
Number of Outputs
1
Operating Temperature
-40℃~+125℃
Output Configuration
Positive
Output Current
500mA
Output Type
Fixed
Output Voltage
3.3V
Power Supply Rejection Ratio (PSRR)
60dB@(100kHz)
Voltage - Supply
5.5V
Voltage Dropout
230mV@(500mA)
standby current
45uA

Order codes

1

Pinout

9
The pins of the ADP124ARHZ-3.3-R7
PinNameType
1VOUTPower out
2VOUTPower out
3SENSEInput
4GNDPower in
5ENInput
6NCNot connected
7VINPower in
8VINPower in
EPGNDPower in

Open-source boards using it

All 6
  • 6 layers89 × 69 mmZynqBoard2, the printed circuit board in 3D

    ZynqBoard2

    tamapochi1/DigitalViolin

    291 parts2
  • 4 layers29 × 93.3 mmSmart penetrometer, the printed circuit board in 3D

    Smart penetrometer

    ARTS-Laboratory/SPECIES

    Design and development of a deployable UAV smart penetrometer

    34 parts6CC-BY-SA-4.0
  • 4 layers29 × 93.3 mmSmart penetrometer, the printed circuit board in 3D

    Smart penetrometer

    ARTS-Laboratory/SPECIES

    Design and development of a deployable UAV smart penetrometer

    31 parts6CC-BY-SA-4.0
  • 4 layers29 × 93.3 mmSmart penetrometer.kicad pro, the printed circuit board in 3D

    Smart penetrometer.kicad pro

    ARTS-Laboratory/SPECIES

    Design and development of a deployable UAV smart penetrometer

    33 parts6CC-BY-SA-4.0
  • 2 layers111 × 275 mmTouchSensor, the printed circuit board in 3D

    TouchSensor

    tamapochi1/DigitalViolin

    54 parts2
  • 6 layersZynqBoard, the printed circuit board in 3D

    ZynqBoard

    tamapochi1/DigitalViolin

    284 parts2

Show this part on your page

A live frame, for any web page
<iframe src="https://pcbkit.io/embed/parts/adi/ADP124ARHZ-3.3-R7" title="ADP124ARHZ-3.3-R7 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>
A picture
<img src="https://pcbkit.io/embed/parts/adi/ADP124ARHZ-3.3-R7.jpg" alt="ADP124ARHZ-3.3-R7" width="1200" height="900">
A picture that opens the part, for a README
[![ADP124ARHZ-3.3-R7](https://pcbkit.io/embed/parts/adi/ADP124ARHZ-3.3-R7.jpg?size=s)](https://pcbkit.io/parts/adi/ADP124ARHZ-3.3-R7)

Questions

Is there a KiCad symbol and footprint for the ADP124ARHZ-3.3-R7?

Yes. The symbol is agg-kicad:ADP124 and the footprint agg:MSOP-8-EP-AD, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP124ARHZ-3.3-R7?

TSSOP-8-EP-3.0mm, with 9 pins. Its footprint is drawn on this page.

Where is the ADP124ARHZ-3.3-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP124ARHZ-3.3-R7?

JLCPCB lists it as part C69505, with 186 in stock; the sellers' links on this page open their listings.

What can replace the ADP124ARHZ-3.3-R7?

Parts like it in the library: the ADP124ACPZ-3.3-R7 by Analog Devices, the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW and the ME6211C33M5G-N by MICRONE. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP124ARHZ-3.3-R7?

6 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Parts like it

8