

MotorDrive
- Size
- 60 × 75 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 142
- Pads
- 502
- Tracks, vias
- 957, 649
- Pours
- 666
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Dec 2025
- Updated
- 18 Dec 2025
Overview
MotorDrive is an open-source printed circuit board by takushio2525, from the takushio2525/motorDrive repository on GitHub. It is a 4-layer board of 60 × 75 mm with 127 parts on 142 nets, routed with 957 tracks and 649 vias.
It is built around the A3921KLPTR-T, CT426-HSN820MR and DMT3020LSDQ-13-VB, with the 2N7002-7-F-ES and P4KE15A among its other parts. Its parts include 51 capacitors, 37 resistors, 15 transistors, 10 ICs and 7 connectors.
Main components
5A3921KLPTR-T
TSSOP-28-EP-40℃~+150℃ No TSSOP-28-EP Brushed DC Motor Drivers ROHSAllegro MicroSystems, LLCBrushed DC Motor DriversCT426-HSN820MR
SOIC-8-40℃~+125℃ 1MHz 1mΩ 20A 300ns 3500Vrms 3V~3.6V 50mV/A 6mA Support SOIC-8 Current Sensors ROHSAllegro MicroSystems, LLCCurrent SensorsDMT3020LSDQ-13-VB
SO-8-55℃~+150℃ 140pF 16mΩ@10V、20mΩ@4.5V 2 N-Channel 3.1W 30V 660pF 7.1nC@4.5V、14.5nC@10V 8.5A 86pF N-Channel SO-8 MOSFETs ROHSVBsemi ElecMOSFETs2N7002-7-F-ES
SOT-23-55℃~+150℃ 1 N-channel 1.6V 1.85Ω@10V、2.05Ω@4.5V 1.8nC@4.5V 11pF 28pF 300mA 350mW 4pF 60V N-Channel SOT-23 MOSFETs ROHSElecSuperMOSFETsP4KE15A
DO-41-55℃~+150℃ 12.8V 14.25V 18.87A 1uA 21.2V 400W TVS Unidirectional DO-41 ESD and Surge Protection (TVS/ESD) ROHSLGEESD And Surge Protection (TVS/ESD)
Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 10k | motorDrive:R_0603_1608Metric | R201, R202, R203, R204, R205, R206, R301, R302, R303, R304, R305, R306, R401, R402, R403, R404 +14 |
| 10 | 0.022u | motorDrive:C_0603_1608Metric | C205, C206, C305, C306, C405, C406, C505, C506, C605, C606 |
| 10 | DMT3020LSDQ-13 | motorDrive:SOIC127P600X170-8N | Q202, Q203, Q302, Q303, Q402, Q403, Q502, Q503, Q602, Q603 |
| 6 | 220u | motorDrive:CP_Elec_6.3x5.9 | C101, C207, C307, C407, C507, C607 |
| 5 | 0.1u | motorDrive:C_0603_1608Metric | C204, C304, C404, C504, C604 |
| 5 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C209, C309, C409, C509, C609 |
| 5 | 0.44uf | motorDrive:C_0603_1608Metric | C201, C301, C401, C501, C601 |
| 5 | 0.47u | motorDrive:C_0603_1608Metric | C203, C303, C403, C503, C603 |
| 5 | 100p | motorDrive:C_0603_1608Metric | C208, C308, C408, C508, C608 |
| 5 | 10u | motorDrive:C_0603_1608Metric | C202, C302, C402, C502, C602 |
| 5 | 1u | motorDrive:C_0603_1608Metric | C210, C310, C410, C510, C610 |
| 5 | 2N7002-7-F | motorDrive:SOT95P240X100-3N | Q201, Q301, Q401, Q501, Q601 |
| 5 | 3.3k | motorDrive:R_0603_1608Metric | R207, R307, R407, R507, R607 |
| 5 | A3921KLPTR-T | motorDrive:A3944KLPTRT | IC201, IC301, IC401, IC501, IC601 |
| 5 | CT426-HSN820MR | motorDrive:SOIC127P600X172-8N | IC202, IC302, IC402, IC502, IC602 |
| 5 | Conn_01x02_Pin | motorDrive:AMASS_XT30U-M_MOTOR | J103, J104, J105, J106, J107 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 5051102296 | motorDrive:5051102296 | J102 |
| 1 | Conn_01x02_Pin | motorDrive:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J101 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED | motorDrive:LED_0603_1608Metric | D102 |
| 1 | P4KE15A | motorDrive:D_A-405_P10.16mm_Horizontal | D101 |
| 1 | R5.1k | motorDrive:R_0603_1608Metric | R101 |
The 123 most common of 127 parts.
Similar boards
- 2 layers84.3 × 49.7 mm

- 2 layers84.3 × 48.4 mm

- 2 layers110 × 100 mm

ESP32-S3-IO DEVICE
noritama-lab/esp32io-hw
ESP32 ベースの I/O ボードのハードウェア設計をまとめたリポジトリです。 / Hardware designs for an ESP32‑based PLC‑compatible I/O board.
85 parts2 - 2 layers100 × 100 mm

ShutterClock
0kam/ShutterClock
Low-power BLE interval timer for fixed-point Nikon DSLR cameras (XIAO nRF52840, Zephyr, Web Bluetooth)
61 parts - 2 layers99 × 75 mm

- 2 layers99 × 75 mm

THRValveControlModule
tokai-student-rocket-project/H-62-Avionics
H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO
54 parts - 2 layers65 × 56.5 mm

SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600 - 4 layers46.4 × 99.8 mm

Trimix Analyzer
magnus188/aegir
Open-source ESP32-P4 trimix analyzer prototype for technical diving,
171 parts14
Questions
How big is the MotorDrive PCB?
It measures 60 × 75 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MotorDrive use?
127 parts, built around the A3921KLPTR-T, CT426-HSN820MR, DMT3020LSDQ-13-VB and 2N7002-7-F-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorDrive KiCad files?
From the takushio2525/motorDrive repository on GitHub, at the commit this page was made from: the board is motorDrive.kicad_pcb and its schematic ST_motor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorDrive design in my own project?
Its repository states no licence, so its author keeps all rights: ask takushio2525 before reusing the design.