Skip to the content
2 layers110 × 100 mmESP32-S3-IO DEVICE, the printed circuit board in 3D

ESP32-S3-IO DEVICE

noritama-lab/esp32io-hw2

ESP32 ベースの I/O ボードのハードウェア設計をまとめたリポジトリです。 / Hardware designs for an ESP32‑based PLC‑compatible I/O board.

Size
110 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
85
Nets
86
Pads
288
Tracks, vias
490, 3
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
24 Mar 2026
Updated
24 Jul 2026

Overview

ESP32-S3-IO DEVICE is an open-source printed circuit board by noritama-lab, from the noritama-lab/esp32io-hw repository on GitHub. It is a 2-layer board of 110 × 100 mm with 85 parts on 86 nets, routed with 490 tracks and 3 vias.

It is built around the ESP32-S3-DEVKITC-1-N8, NJU7043D and 2SK4017(Q), with the P4KE15A and P6KE33A among its other parts. Its parts include 31 resistors, 22 diodes, 14 ICs, 9 connectors and 6 transistors. It belongs with the ESP32 boards of this library.

Main components

5

README

README.md

ESP32-S3 IO Device – Hardware Repository

このリポジトリは、ESP32-S3 を産業用途で扱うための
入出力回路(KiCad) と 筐体データ(FreeCAD / 3MF / STEP) を公開するものです。

本プロジェクトは、電子工作レベルではなく、
工場の 24V 機器と安全に接続できる小型 I/O デバイス
として利用できることを目標に設計しています。

⚠️ 本リポジトリは個人開発によるものであり、認証・第三者検証を受けたものではありません。
実運用前には、必ずご自身の環境・負荷条件に対する検証を行ってください。詳しくは 免責事項 を参照してください。

このハードウェアは、以下のソフトウェア群と組み合わせて使用することを想定しています。
This hardware is designed to work together with the following software components.

  • 🔧 HTTP版ファームウェア: esp32io-firmware — WiFi/HTTP経由での制御版
  • 🐍 HTTP版 Pythonクライアント: esp32io — PyPI公開
  • 🔧 MQTT版ファームウェア: esp32io-mqtt-firmware — MQTT + Home Assistant対応ファームウェア
  • 🐍 MQTT版 Pythonクライアント: esp32io-mqtt — PyPI公開

ESP32-S3 IO Device – Hardware Repository (English)

This repository provides the hardware design (KiCad) and mechanical data (FreeCAD / 3MF / STEP)
for an ESP32-S3 based I/O device intended for industrial 24V environments.

The goal of this project is to create a compact I/O module that can be safely connected
to factory equipment, rather than a hobby-level electronics board.

⚠️ This is an individually developed, open-source project. It has not been certified or independently verified.
Please validate the design against your own environment and load conditions before deploying it in production. See Disclaimer below.

This hardware is designed to be used together with:


含まれるデータ / Included Data

■ KiCad(回路図・基板) / KiCad (Schematics & PCB)

  • ESP32-S3-IO-DEVICE.kicad_sch – 回路図 / Schematic
  • ESP32-S3-IO-DEVICE.kicad_pcb – 基板データ / PCB layout
  • ESP32-S3-IO-DEVICE.kicad_pro – プロジェクト設定 / Project settings
  • sym-lib-table / fp-lib-table – ライブラリ設定 / Library tables

KiCad プロジェクトを開くだけで、
回路図 → 基板 → ガーバー まで完全に再現できます。
Opening the KiCad project allows full reproduction from schematic → PCB → Gerber.

基板自体はHTTP版・MQTT版どちらのファームウェアでも共通してお使いいただけます。
The same PCB can be used with either the HTTP or MQTT firmware.


■ FreeCAD / 3D データ(筐体・取付板)

FreeCAD / 3D Data (Enclosure & Mounting Parts)

  • .FCStd – FreeCAD モデル / FreeCAD models
  • .3mf – 3D プリント用 / For 3D printing
  • .step – 汎用 CAD 形式 / Standard CAD format

ケース、基板カバー、取付板など、
デバイスとして使える形にするための筐体データを含みます。
Includes mechanical parts required to assemble the device.

ℹ️ 基板取付板は現行基板でもそのままご利用いただけます。
基板カバーのみ旧基板に合わせた設計のため、現行基板とは適合しない場合があります。
最新基板に対応した基板カバーは今後更新予定です。

ℹ️ The board mounting plate is compatible with the current PCB as-is.
Only the board cover was designed for an older board revision and may not fit the current PCB.
An updated cover matching the latest board will be published in the future.


🏭 工場で使うための設計方針

Industrial Design Principles

本デバイスは、一般的な電子工作向けではなく、
工場・設備で使われる 24V 系信号を安全に扱うための回路構成を採用しています。
This device is designed for industrial 24V signals, not hobby electronics.

✔ DIO_OUT:NPN シンク出力 / NPN Sink Output

PLC と同じ方式で外部ソース負荷を駆動可能。
Compatible with PLC-style sourcing loads.

✔ DIO_IN:ソース入力(NPN シンク出力センサ対応)

Source Input (for NPN sensors)

トランジスタ+抵抗+Zener による保護回路を採用。
Protected using transistor + resistors + Zener.

✔ ADC:0〜10V アナログ入力 / 0–10V Analog Input

工場のアナログ信号に合わせて 分圧+可変抵抗+Zener を使用。
Uses voltage divider + trim resistor + Zener for safe conversion.

ℹ️ DI/DOはフォトカプラによりMCU側と絶縁されていますが、ADC(アナログ入力)は非絶縁です。
ℹ️ DI/DO channels are isolated from the MCU via optocouplers. The ADC (analog input) is not isolated.

✔ PWM:3.3V ロジック出力 / 3.3V Logic PWM

外部ドライバ・SSR の制御信号として使用。
Used as a control signal for external drivers or SSRs.


⚙️ 想定負荷 / Intended Load

DIO_OUT(NPNシンク出力)は、以下のような 小型DC24Vリレー の直接駆動を想定して設計・検証しています。
The DIO_OUT (NPN sink output) is designed and verified for driving small DC24V relays, such as:

  • オムロン LYシリーズ相当(コイル電流 目安 20〜40mA程度) / Omron LY-series relays or equivalent (coil current approx. 20–40mA)

より大きな消費電流のソレノイド・コンタクタ・AC駆動機器を直接駆動することは想定していません。
それらを制御する場合は、SSRやパワーリレーなど適切な中間段を介してください。
Larger solenoids, contactors, or AC-driven devices are not intended to be driven directly.
Use an appropriate intermediate stage (e.g. SSR or power relay) for such loads.

複数チャンネルを同時にON にする場合、COM+ライン全体に流れる電流(チャンネル数 × コイル電流)が、
使用する電源・配線の許容電流を超えないことをご確認ください。
When switching multiple channels simultaneously, verify that the total current on the COM+ line
(number of channels × coil current) does not exceed the current rating of your power supply and wiring.


ディレクトリ構成 / Directory Structure

/KiCad /3D_print

📷 組み立て後の完成写真、および使用部品表(BOM)は準備中です。追って追加予定です。
📷 Assembly photos and a bill of materials (BOM) are planned and will be added soon.


必要なソフトウェア / Required Software

  • KiCad 7+
  • FreeCAD 0.21+
  • 3D プリンタ(任意) / Any 3D printer (FDM recommended)

⚠️ 免責事項 / Disclaimer

本リポジトリで公開する回路・筐体データは、個人による設計・検証であり、
特定の安全規格・産業規格への適合を保証するものではありません。
実際の設備・機器へ接続する場合は、電圧・電流・絶縁・保護協調などについて、
利用者ご自身の責任において十分な検証を行ってください。
本データの利用によって生じたいかなる損害についても、作者は責任を負いません。

The circuit and enclosure data provided in this repository are individually designed and verified,
and do not guarantee compliance with any specific safety or industrial standard.
Before connecting this device to actual equipment, users are solely responsible for verifying
voltage, current, isolation, and protection coordination appropriate to their environment.
The author assumes no liability for any damage resulting from the use of this data.


ライセンス / License

  • 回路図・基板データ(KiCad): MIT License

  • 3D モデル(FreeCAD / STEP / 3MF): CC BY-SA 4.0

  • Schematic & PCB (KiCad): MIT License

  • 3D Models (FreeCAD / STEP / 3MF): CC BY-SA 4.0

Parts

85
QtyValueFootprintReferences
12PC817Package_DIP:DIP-4_W7.62mmU3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13, U14
8100ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR6, R7, R20, R21, R22, R23, R24, R25
810kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3, R5, R14, R15, R16, R17, R18, R19
61N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD11, D12, D13, D14, D15, D16
62SK4017Package_TO_SOT_THT:TO-126-3_VerticalQ1, Q2, Q3, Q4, Q5, Q6
6330ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR8, R9, R10, R11, R12, R13
647kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR26, R27, R28, R29, R30, R31
6BZX55C12VDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD5, D6, D7, D8, D9, D10
6E-202Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD17, D18, D19, D20, D21, D22
4Terminal_04TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_HorizontalJ1, J3, J5, J7
20.01μFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC2, C3
222kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2, R4
2P4KE15ADiode_THT:D_A-405_P7.62mm_HorizontalD1, D2
2Socket_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ2, J4
2Terminal_06TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_HorizontalJ8, J9
10.1μFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
11N5819Diode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD4
12.2kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1ESP32-S3-DevKitCEspressif:ESP32-S3-DevKitC_3rd_partyU2
1NJU7043DPackage_DIP:DIP-8_W7.62mmU1
1P6KE33ADiode_THT:D_A-405_P7.62mm_HorizontalD3
1Terminal_02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ6

Similar boards

  • 2 layers100 × 100 mmShutterClock, the printed circuit board in 3D

    ShutterClock

    0kam/ShutterClock

    Low-power BLE interval timer for fixed-point Nikon DSLR cameras (XIAO nRF52840, Zephyr, Web Bluetooth)

    61 parts
  • 2 layers210 × 140 mmGifu creation koubou, the printed circuit board in 3D

    Gifu creation koubou

    kinoshita-lab/gifu-creation-koubou-teaching-material

    109 parts3MIT
  • 2 layersAudio Line, the printed circuit board in 3D

    Audio Line

    Lathe-Mariel/Pmod

    Pmod boards

    43 parts
  • 4 layers60 × 75 mmMotorDrive, the printed circuit board in 3D

    MotorDrive

    takushio2525/motorDrive

    127 parts
  • 2 layers99 × 75 mmTHRValveControlModule, the printed circuit board in 3D

    THRValveControlModule

    tokai-student-rocket-project/Gen6-GSE-Elec

    第6世代自動GSE電装系

    59 parts2MIT
  • 2 layers99 × 75 mmTHRValveControlModule, the printed circuit board in 3D

    THRValveControlModule

    tokai-student-rocket-project/H-62-Avionics

    H-62搭載計器 すばる1.3 | 2025年度 夏季 能代 NOGO

    54 parts
  • 2 layers68.6 × 53.3 mmShoei, the printed circuit board in 3D

    Shoei

    CALIL/openbookcamera

    高速な書影撮影システム「オープンブックカメラ」

    28 parts23MIT
  • 2 layers100 × 100 mmPico router backup, the printed circuit board in 3D

    Pico router backup

    Dudestin/tinyEtherDeveloper

    Inexpensive FPGA board-based Ethernet evaluation board project. Consists mostly of DIP components and uses Tang PriMER. It can be built for about $50.

    98 parts2

Questions

How big is the ESP32-S3-IO DEVICE PCB?

It measures 110 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32-S3-IO DEVICE use?

85 parts, built around the ESP32-S3-DEVKITC-1-N8, NJU7043D, 2SK4017(Q) and P4KE15A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32-S3-IO DEVICE KiCad files?

From the noritama-lab/esp32io-hw repository on GitHub, at the commit this page was made from: the board is KiCad/ESP32-S3-IO-DEVICE/ESP32-S3-IO-DEVICE.kicad_pcb and its schematic KiCad/ESP32-S3-IO-DEVICE/ESP32-S3-IO-DEVICE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32-S3-IO DEVICE design in my own project?

Its repository states no licence, so its author keeps all rights: ask noritama-lab before reusing the design.