
Mixerli
stahlnow/mixerli
Battery powered 10 channel (4x2 + 1x2) stereo mixer featuring stereo input level control slider and stereo rotary aux send level control.

USB PD adapter for bread board
USB PD BB is an open-source printed circuit board by takeru0x5569, from the takeru0x5569/USB_PD_BB repository on GitHub. It is a 2-layer board of 30 × 16 mm with 13 parts on 21 nets, routed with 27 tracks and 6 vias.
It is built around the AO3400A and UJC-HP-3-SMT-TR. Its parts include 4 resistors, 2 capacitors, 1 IC, 1 connector and 1 switch. It belongs with the power boards of this library.
USB PD adapter for bread board
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k | Basic:REG1608m | R3, R4 |
| 2 | 5.1k | Basic:REG1608m | R1, R2 |
| 2 | ~ | Jumper:SolderJumperSel | JP1, JP2 |
| 1 | 1uF/50V | Basic:CAP1608m | C1 |
| 1 | 2MS1-T1-B4-VS2-S-E | Switch:2MS1-T1-B4-VS2-Q-E-S | SW1 |
| 1 | AO3400A | Discrete:AO3400A | TR1 |
| 1 | IP2721D | IC:IP2721D | U3 |
| 1 | PinHeader3x2 | PinHeader:PinHeader3x2 | PH1 |
| 1 | UJC-HP-3-SMT-TR | Connector:UJC-HP-3-SMT-TR | CN1 |
| 1 | Value | Basic:CAP1608m | C2 |

stahlnow/mixerli
Battery powered 10 channel (4x2 + 1x2) stereo mixer featuring stereo input level control slider and stereo rotary aux send level control.



arthurbenemann/OPA_PHONO
Phono amplifier for MM cartridges, base on TI's OPA lineup


perriestudios/SMD-Soldering-PCB
A PCB I designed as a TA for EE 201 at UW over the Winter 2024

AdamPrystupa/ESP32_carrier_board
ESP32 carrier board that will be included in weater station

alex1324575/snake-pcb-business-card
STM32-powered PCB business card with a 10x9 LED Snake game, USB-C power, and passive NFC. KiCad hardware, C firmware, and verification reports.
It measures 30 × 16 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the AO3400A and UJC-HP-3-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the takeru0x5569/USB_PD_BB repository on GitHub, at the commit this page was made from: the board is USB_PD_BB.kicad_pcb and its schematic USB_PD_BB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask takeru0x5569 before reusing the design.