
Tag breakout l432-u375-lipo v1
tag-designs/hardware
Hardware designs for tags and bases

Hardware designs for tags and bases
Imutag is an open-source printed circuit board by tag-designs, from the tag-designs/hardware repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 18 × 9 mm with 27 parts on 43 nets, routed with 379 tracks and 34 vias.
It is built around the STM32L432KCU6, AK09940A and LPS22DF, with the MX25U12843GBBI00, LSM6DSV and RV-3028-C7 among its other parts. Its parts include 11 capacitors, 7 ICs, 6 connectors, 1 resistor and 1 diode. It belongs with the STM32 boards of this library.
Board and mechanical designs for the ultralight archival data loggers (tags) documented at https://tag-designs.github.io/.
| Path | Holds |
|---|---|
BoardDesigns/ | KiCad schematics and layouts for the tags and base boards, with their KiBot fabrication configurations |
Mechanical/ | OpenSCAD sources for cases, carriers and harness jigs |
docs/ | The hardware documentation site, published at https://tag-designs.github.io/hardware/ |
STM32_open_pin_data | ST's pin-data submodule, used by the design-rule helpers |
Board designs reach the shared symbol and footprint libraries through
${KIPRJMOD}/../../, so a board is tied to its depth in the directory tree.
Moving one between directories is more than a move.
The documentation's board renders and schematic PDFs are generated from the KiCad files and committed, because the workflow that publishes the site has no KiCad in it. After editing a board:
cmake -S BoardDesigns -B build-boards
cmake --build build-boards --target board-docsBoardDesigns/REGENERATING.md covers the
targets, the three checks that guard the figures, what each of their messages
means, and why generation is not done in CI. Read it before chasing a render
that looks wrong — in particular, kicad-cli reports nothing at all when it
cannot find a 3D model.
Copyright © 2018–2026 The Trustees of Indiana University.
This source describes Open Hardware and is licensed under the CERN Open
Hardware Licence Version 2 — Permissive (CERN-OHL-P-2.0). You may
redistribute and modify this source and make products using it under the terms
of that licence, whose full text is in LICENSE and at
https://ohwr.org/cern_ohl_p_v2.txt.
This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the licence for applicable conditions.
The STM32_open_pin_data submodule is ST's and carries its own license. The
software that runs on these boards lives in a separate repository under the MIT
License; see the
project licensing summary.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uf | Capacitor_SMD:C_0201_0603Metric | C1, C2, C3, C5, C9, C501, C502, C503 |
| 4 | Conn_01x01 | AccelTag:taghole1.1mm | J301, J302, J303, J304 |
| 2 | 1uf | Capacitor_SMD:C_0201_0603Metric | C7, C8 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | 4.7uf | Capacitor_SMD:C_0201_0603Metric | C4 |
| 1 | AK09940A | AccelTag:AK09940a | U2 |
| 1 | CONN_01X02 | AccelTag:batterypads | J401 |
| 1 | CONN_02X04 | AccelTag:tagpoints6 | J201 |
| 1 | D | Diode_SMD:D_0402_1005Metric | D401 |
| 1 | LPS22DF | Package_LGA:ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2y | U3 |
| 1 | LSM6DSV | AccelTag:LGA14-L_2P59X3P1X0P5_STM | U5 |
| 1 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-883 | Q501 |
| 1 | RV-3028-C7 | AccelTag:RV-8803-C7 | U501 |
| 1 | TPS7A2018PDQN | Package_SON:Texas_X2SON-4_1x1mm_P0.65mm | U4 |
| 1 | stm32l431kc | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U302 |
| 1 | ~ | AccelTag:IC_MX25U12843GBBI00 | U6 |

tag-designs/hardware
Hardware designs for tags and bases

tag-designs/hardware
Hardware designs for tags and bases

tag-designs/hardware
Hardware designs for tags and bases









tag-designs/hardware
Hardware designs for tags and bases

hardesk/zxx-pcb
Z80 CPU ,----------------..----------------. --> CLK 6| XCLK 22 48 io[13] |35 A5 --> D4 7| io[24] 62 42 io[ 8] |34 A4 --> D3 8| io[25] 2 43 io[ 9] |33 A3 --> D5 9| io[26] 3 44 io[10] |32 A2 --> D6 10| io[27] 4 46 io[12]…



MatthiasGeorgImhof/STMF405_Flight_Controller
A flight controller inspired by Speedybee F405 v3 but with CAN and flash memory instead of flash card.

MatthiasGeorgImhof/STMF765_Flight_Controller
A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.


nrwiersma/tasgdo
TasGDO is an ESP32 Garage Door Controller, intended to be used with Tasmota for a local Matter controller.

acha666/Zigbee-Air-Sensor
Low power air sensor with E-ink screen and ESP32-H2
It measures 18 × 9 mm and has 2 copper layers, 0.4 mm thick.
27 parts, built around the STM32L432KCU6, AK09940A, LPS22DF and MX25U12843GBBI00. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tag-designs/hardware repository on GitHub, at the commit this page was made from: the board is BoardDesigns/Tags/imutag/imutag.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).