Skip to the content
2 layers285 × 95.1 mmOverboard, the printed circuit board in 3D

Overboard

t33chong/overboard
Full screenGitHub.kicad_pcb
Size
285 × 95.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
189
Nets
158
Pads
704
Tracks, vias
1,673, 100
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
13 Oct 2023
Updated
13 Oct 2023

Overview

Overboard is an open-source printed circuit board by t33chong, from the t33chong/overboard repository on GitHub. It is a 2-layer board of 285 × 95.1 mm with 189 parts on 158 nets, routed with 1,673 tracks and 100 vias.

It is built around the SK6812MINI-E and AST1109MLTRQ. Its parts include 56 diodes, 52 switches, 12 resistors, 5 connectors and 3 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

189
QtyValueFootprintReferences
531N4148User:Diode_THT_P7.62mmD00, D01, D02, D03, D10, D11, D12, D13, D20, D21, D22, D23, D30, D31, D32, D33 +37
51Key_SwitchUser:MXOnly-1UK00, K01, K02, K03, K10, K11, K12, K13, K20, K21, K22, K23, K30, K31, K32, K33 +35
48SK6812MINI-EUser:SK6812MINI-E_RGB_LED_3.2x2.8mmRGB1, RGB2, RGB10, RGB11, RGB12, RGB13, RGB14, RGB15, RGB16, RGB17, RGB18, RGB19, RGB20, RGB21, RGB22, RGB23 +32
4470User:Resistor_THT_P7.62mmR9, R10, R11, R12
3LEDUser:LED_D1.8mm_W3.3mm_H2.4mmLED1, LED2, LED3
21N4001User:1N4001DL1, DL2
21kUser:Resistor_THT_P7.62mmR6, R7
24.7kUser:Resistor_THT_P7.62mmR3, R4
25.1kUser:Resistor_THT_P7.62mmR1, R2
2Conn_01x04User:PinHeader_1x04_P2.54mm_Vertical_CenteredJ4, J5
2LUser:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalL1, L2
2Q_NPN_Darlington_BCEUser:TO-220-3Q1, Q2
2RotaryEncoder_SwitchUser:Panasonic_EVQ-WGD001_LargerCutoutENC1, ENC2
1100kUser:Resistor_THT_P7.62mmR5
110kUser:Resistor_THT_P7.62mmR8
12.2uFCapacitor_THT:C_Radial_D4.0mm_H7.0mm_P1.50mmC1
1AST1109MLTRQBuzzer_Beeper:Buzzer_Mallory_AST1109MLTRQLS1
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_HorizontalJ2
1G***User:Trackpoint_OutlineH1
1HRO-TYPE-C-31-M-12Type-C:HRO-TYPE-C-31-M-12-HandSolderingJ1
1OLED_I2CUser:128x64OLEDOLED1
1Q_NMOS_DGSUser:TO-220-3Q3
1Reset_SWUser:Panasonic_EVPAWSW1
1Teensy2.0++User:Teensy2.0++_43PinU1
1TrackpointConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_HorizontalJ3
1Val**User:Seal_Logo_12mmRef**

The 188 most common of 189 parts.

More from t33chong/overboard

1
  • 2 layers285.4 × 94.9 mmPlate, the printed circuit board in 3D

    Plate

    t33chong/overboard

    70 parts

Similar boards

  • 4 layers66 × 60 mmMainFlightComputer, the printed circuit board in 3D

    MainFlightComputer

    RockSat-X/RSXVT2026

    Our experiment aims to evaluate the use of optical navigation with Commercial-off-the-Shelf (COTS) products for use in spaceflight applications.

    72 parts3MIT
  • 2 layers342.9 × 95.3 mmDOMO70, the printed circuit board in 3D

    DOMO70

    DomRRuggeri/DOMO70

    70-Key Keyboard PCB Design

    167 parts1
  • 2 layers285.8 × 95.3 mmR60-std, the printed circuit board in 3D

    R60-std

    rpedde/r60-std

    A standard poker 60% board

    178 parts
  • 4 layers25 × 44 mmNordic clicker, the printed circuit board in 3D

    Nordic clicker

    yohummus/nordic-clicker

    Simple and small remote control based on the nRF52840 SoC

    58 parts
  • 4 layers234 × 84 mmMain panel, the printed circuit board in 3D

    Main panel

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    234 parts3kApache-2.0
  • 4 layers180.8 × 300.3 mmDilemma, the printed circuit board in 3D

    Dilemma

    Bastardkb/Dilemma

    The Dilemma is a vertical stagger low-profile keyboard with mods.

    383 parts590
  • 4 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    106 parts575GPL-2.0

Questions

How big is the Overboard PCB?

It measures 285 × 95.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Overboard use?

189 parts, built around the SK6812MINI-E and AST1109MLTRQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Overboard KiCad files?

From the t33chong/overboard repository on GitHub, at the commit this page was made from: the board is overboard.kicad_pcb and its schematic overboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Overboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask t33chong before reusing the design.