Skip to the content
2 layers53.3 × 28.2 mmIRIS, the printed circuit board in 3D

You will also need: - soldering iron and solder - glue (for the case) - double sided tape (for battery, pcb and charging module) - cutting pliers

Size
53.3 × 28.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
12
Pads
35
Tracks, vias
46, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Apr 2026
Updated
23 May 2026

Overview

IRIS is an open-source printed circuit board by szpuszi, from the szpuszi/IRIS-V1 repository on GitHub, published under the MIT licence. It is a 2-layer board of 53.3 × 28.2 mm with 13 parts on 12 nets, routed with 46 tracks and 0 vias.

It is built around the ATTINY85-20PU and IRLZ44N. Its parts include 4 resistors, 3 capacitors, 2 diodes, 1 IC and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

IRIS (Infra-Red Interrupt System)

IRIS is an open-hardware project designed to teach the basics of electronics, soldering and basic components. With this device you can shut down almost any IR-controlled device, like TVs.

Why I made it?

I created IRIS for people interested in hardware hacking. It help young enthusiasts understand how different components communicate. By soldering the PCB themselves, makers see the connections between the code and the physical hardware.

How it works?

  1. Brain: The ATtiny85 microcontroller stores the IR codes.
  2. Logic: When the button is pressed the MCU wakes up and sends a modulated signal.
  3. Driver: Since IR LEDs require more current than the MCU can provide, we use a IRLZ44N MOSFET.
  4. Output: Two TSAL6100 IR diodes transmit the signal.

Power

IRIS uses LP403035. The battery is charged using PiMoroni PIM611.

What will you learn?

  • Basic Components: Understanding why we use resistors, electrolytic and ceramic capacitors and how they work.
  • Soldering: Working with THT and SMD components. Cold joints etc.
  • Transistor Logic: Understanding how a MOSFET uses a tiny voltage to control a much larger current flow.
  • Power Management: Learning to work with Li-Po batteries safely, including charging.
  • Programming: How to turn an Arduino into an ISP programmer to flash firmware onto standalone microcontrollers like the ATtiny85.
  • Microcontroller Basics: Getting to know ATtiny85, compact and universal microcontroller. How the ATtiny85 manages "deep sleep" mode to save battery (almost no use) and wakes up with instantly on a button press.
  • Reading Schematics: Learn how to understand schematics. Turning a digital circuit design into a working device.
  • Ethical Hacking: What you can, and what you shouldn't do.
  • Ordering your PCB: Learn how to order your PCB.

BOM

BOM is located Here

Total is ≈ 60USD

You will also need:

  • soldering iron and solder
  • glue (for the case)
  • double sided tape (for battery, pcb and charging module)
  • cutting pliers

Guide

The educational manual and Troubleshooting FAQ are currently being written.

The full assembly guide is planned and will begin development as soon as the parts arrive.

Fallout Zine Page

zine_page

Gallery

PCB

obraz

Schematic

obraz

3D PCB

obraz obraz obraz obraz

Case

obraz-removebg-preview(1) obraz-removebg-preview

Parts

13
QtyValueFootprintReferences
21.5RResistor_SMD:R_2512_6332MetricR1, R4
21000uFCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1, C3
2IRLEDLED_THT:LED_D5.0mmD1, D2
1100nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC2
110KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
1220RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
1ATtiny85-20PPackage_DIP:DIP-8_W7.62mmU1
1ButtonButton_Switch_THT:SW_PUSH_6mmSW1
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1IRLZ44NPackage_TO_SOT_THT:TO-220-3_VerticalQ1

Similar boards

  • 2 layers30.7 × 76.1 mmRepeater v2, the printed circuit board in 3D

    Repeater v2

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    17 parts95CC0-1.0
  • 2 layers101.5 × 54 mmSimkarte, the printed circuit board in 3D

    Simkarte

    osmocom/osmocom-analog

    Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog

    15 parts32GPL-3.0
  • 2 layers76.2 × 50.8 mmJerboa-8, the printed circuit board in 3D

    Jerboa-8

    strickyak/jerboa-attiny85-mod-synth

    Modular Synthesizer using an ATtiny85 chip for each module.

    23 parts31MIT
  • 2 layersCastVolumeKnob, the printed circuit board in 3D

    CastVolumeKnob

    WebmasterTD/CastVolumeKnob

    Hardware Volume Knob for Google Cast devices

    18 parts25
  • 2 layers55.9 × 55.9 mmPrintplaat, the printed circuit board in 3D

    Printplaat

    floriaanpost/wonderfoon

    Een nieuwe implementatie van de wonderfoon

    14 parts24
  • 2 layers71.1 × 40.6 mmTiny blinky, the printed circuit board in 3D

    Tiny blinky

    Hack-a-Day/Remoticon_KiCad_Blender

    support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop

    21 parts22
  • 2 layers242 × 60 mmRoothubs, the printed circuit board in 3D

    Roothubs

    gkiefer/home2l

    The Home2Ls - Smart Tools for a Private Home

    178 parts21

Questions

How big is the IRIS PCB?

It measures 53.3 × 28.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the IRIS use?

13 parts, built around the ATTINY85-20PU and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the IRIS KiCad files?

From the szpuszi/IRIS-V1 repository on GitHub, at the commit this page was made from: the board is hardware/IRIS.kicad_pcb and its schematic hardware/IRIS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the IRIS design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).