

DO8 V1.2
STM32-based PLC system
- Size
- 100 × 77 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 121
- Pads
- 447
- Tracks, vias
- 859, 247
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Jul 2021
- Updated
- 2 Jun 2026
Overview
DO8 V1.2 is an open-source printed circuit board by Synthron, from the Synthron/SynPLC repository on GitHub. It is a 4-layer board of 100 × 77 mm with 126 parts on 121 nets, routed with 859 tracks and 247 vias.
It is built around the MAX485ED, SN65HVD232D and TLP291-4, with the ITS4880R, SM6T36A and BC846 among its other parts. Its parts include 51 resistors, 26 diodes, 15 capacitors, 11 connectors and 9 ICs. It belongs with the STM32 boards of this library.
Main components
9MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsSN65HVD232D
SOIC-8-40℃~+85℃ 17mA 1Mbps 3.3V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTLP291-4
SOIC16Quad Channel Optocoupler, Phototransistor OutputToshibaUncategorisedITS4880R
BSSOP-36-EP-11mm-30℃~+85℃ 11V~45V 150mΩ 625mA 8 Active High High Side Switch 过压保护、欠压锁定、反向电压保护、Overcurrent Protection、Over temperature protection、Short-Circuit Protection、负载突降保护 BSSOP-36-EP-11mm Power Distribution Switches ROHSInfineon TechnologiesPower Distribution SwitchesSM6T36A
SMB(DO-214AA)-55℃~+150℃ 1uA 34.2V 36V 4kW@8/20us 62A@8/20us 64.3V IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHSSTMicroelectronicsESD And Surge Protection (TVS/ESD)BC846
SOT-23-65℃~+150℃ 1 NPN 100mA 110 15nA 250mW 400mV 65V 6V 770MHz NPN SOT-23 Bipolar (BJT) ROHSNexperiaBipolar (BJT)LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesTBL009-500-02GY-2GY
插件,P=5mm1 10A 2 2P 300V 5mm Gray Through Hole Plugin,P=5mm Spring Clamp System Terminal Block ROHSCUISpring Clamp System Terminal BlockFQP27P06
TO-220-55℃~+175℃ 1 P-Channel 1.4nF 120W 27A 43nC@10V 4V 60V 70mΩ@10V TO-220 MOSFETs ROHSonsemiMOSFETs
README
README.mdSynPLC
Open Source modular PLC with Microcontrollers
WORK IN PROGRESS
To-Dos
Repo
- Rewrite documentation in english
- add reviewed PCBs
- fill out tech specs of modules once programmed
- Cleanup Repo
- better folder structure
- delete obsolete files
Hardware
- Order new PCBs with STM32s
- Assemble new PCBs
- Test new hardware
- DO
- DI
- AO
- AI
- XT
- New Modules
- CPU V2
- Layout
- Review
- Ordered
- Relais Module
- PWM Module
- CPU V2
Software
- Write Software for new PCBs
- CPU
- DO
- DI
- AO
- AI
- XT
- Porting of SR485 protocol to new hardware
- Make it use Interrupts
- Make it more efficient (processing)
- implement failsafes when no answer
- Define and program CAN protocol
- Write generalized Code for CPU
-
define structured Text(postponed) -
import structured text and parse into running code(postponed)
Possible Fixes
-
MAX485 with 5V supply voltage on all IO modules ?- changed to 3V3 on the CPU
- DIs and DO (alt. switches) re-soldering (dead channels)
- better connector for CPU
- parametrize RS485 lib a bit more (tbd)
issues
- weird additional bytes sent by slave after ACK and CS???
- resolved
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4, R10, R11, R12, R13, R14, R15, R16, R32, R35, R37, R39, R41, R43, R45 +8 |
| 13 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15 |
| 9 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34, R36, R38, R40, R42, R44, R46, R48, R49 |
| 9 | SM6T36A | Diode_SMD:D_SMB | D5, D6, D8, D9, D11, D13, D14, D16, D18 |
| 8 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R18, R19, R20, R21, R22, R23, R24 |
| 8 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R26, R27, R28, R29, R30, R31, R33 |
| 8 | BC846 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 8 | LED | LED_THT:LED_D3.0mm | D1, D2, D3, D4, D7, D10, D12, D15 |
| 8 | LL4148 | Diode_SMD:D_MiniMELF | D19, D20, D21, D22, D23, D24, D25, D26 |
| 5 | TBL009-500-02GY-2GY | KiCAD_Additional_Parts:TBL00950002GY2GY | J7, J8, J9, J10, J11 |
| 4 | TLP291-4 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | U5, U6, U7, U8 |
| 2 | 1µ | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 2 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Horizontal | J5, J6 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 8v2 | Diode_SMD:D_MiniMELF | D17 |
| 1 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | FQP27P06 | Package_TO_SOT_THT:TO-220-3_Vertical | Q9 |
| 1 | ITS4880R | KiCAD_Additional_Parts:PG-DSO-36 | IC1 |
| 1 | LOGO | KiCAD_personal:logo_new | G*** |
| 1 | MAX485E | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | SN65HVD232 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SW_DIP_x05 | Button_Switch_THT:SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm | SW1 |
The 124 most common of 126 parts.
More from Synthron/SynPLC
6- 4 layers100 × 77 mm

- 4 layers100 × 77 mm

- 4 layers100 × 77 mm

- 4 layers100 × 77 mm

- 4 layers100 × 77 mm

- 4 layers100 × 77 mm

Similar boards
- 2 layers110 × 46 mm

Rover panel supervisor
karimf1/rover-panel-pcb
This repository is continuation of rover panel repo. Power panel PCB layout is implemented in KiCAD based of AutoCAD version of rover panel .
106 partsMIT - 4 layers160 × 100 mm

- 2 layers49 × 59 mm

- 4 layers96 × 172 mm

- 2 layers95 × 85 mm

NUC980
TreeNewbeer/Coonix
Coonix is a funny project about building a application platform in Allwinner-v3s processor.
172 parts4 - 4 layers120 × 100 mm

- 2 layers57 × 38.5 mm

- 2 layers55.8 × 55.8 mm

ControlBoard
D3epCr3ature/RE-CPNV-ElectronicDice
Reverse engineering of an electronic dice assembled during my diploma of Vocational Education and Training (VET) in electronics.
27 parts
Questions
How big is the DO8 V1.2 PCB?
It measures 100 × 77 mm and has 4 copper layers, 1.6 mm thick.
What parts does the DO8 V1.2 use?
126 parts, built around the MAX485ED, SN65HVD232D, TLP291-4 and ITS4880R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DO8 V1.2 KiCad files?
From the Synthron/SynPLC repository on GitHub, at the commit this page was made from: the board is hardware/pcbs/DO8_V1.2/DO8_V1.2.kicad_pcb and its schematic hardware/pcbs/CPU_V2/CPU_PiggyBack/CPU_PiggyBack.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DO8 V1.2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Synthron before reusing the design.