Skip to the content
4 layers35 × 50 mmControlPanelV3, the printed circuit board in 3D
Size
35 × 50 mm
Copper layers
4
Thickness
1.6 mm
Parts
45
Nets
44
Pads
192
Tracks, vias
369, 151
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 May 2019
Updated
6 Sep 2026

Overview

ControlPanelV3 is an open-source printed circuit board by synthesissolutions, from the synthesissolutions/geeksforkids repository on GitHub. It is a 4-layer board of 35 × 50 mm with 45 parts on 44 nets, routed with 369 tracks and 151 vias.

It is built around the STM32G031G8U6, LPW5209AB5F and 0402WGF1002, with the BM03B-SRSS-TBT(LF)(SN), CL05B104KB54PNC and M2.5 among its other parts. Its parts include 19 resistors, 8 connectors, 7 ICs, 6 capacitors and 1 diode. It belongs with the STM32 boards of this library.

Main components

10

README

README.md

geeksforkids

car_firmware - Code for RC/Joytick controlled cars

Parts

45
QtyValueFootprintReferences
1810kΩResistor_SMD:R_0402_1005MetricR2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 +2
6JST SHUseful Modifications:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_VerticalJ3, J4, J5, J6, J7, J8
6TPS2041BPackage_TO_SOT_SMD:SOT-23-5U2, U3, U4, U5, U6, U7
4100nFCapacitor_SMD:C_0402_1005MetricC1, C2, C5, C6
3M2.5MountingHole:MountingHole_2.7mm_M2.5_Pad_ViaH1, H2, H3
210uFCapacitor_SMD:C_0603_1608MetricC3, C4
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1470ΩCapacitor_SMD:C_0402_1005MetricR1
18P8CUseful Modifications:RJ45_x08_Tab_UpJ1
1RedCapacitor_SMD:C_0603_1608MetricD1
1TC2030Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ2
1UFQFPN-28Useful Modifications:STM32G031G8U6U1

More from synthesissolutions/geeksforkids

12

Similar boards

  • 4 layers76 × 76.9 mmDsp amplifier x4, the printed circuit board in 3D

    Dsp amplifier x4

    blus-audio/hardware

    Audio hardware

    179 parts1CERN-OHL-S-2.0
  • 4 layers32.8 × 36.3 mmEsp32, the printed circuit board in 3D

    Esp32

    gdoor-org/gdoor

    Wifi adapter and bus protocol documentation for the Gira TKS Door System

    68 parts57GPL-3.0
  • 4 layers50 × 20 mmGigaPower200V, the printed circuit board in 3D

    GigaPower200V

    kaminaris/GigaESC-Power200V

    Compact 50 × 20 mm non-isolated power-supply module for the modular GigaESC platform, intended for the 200 V version. Provides 12 V, 5 V and 3.3 V rails through a separate output connector.

    70 parts
  • 4 layers97.1 × 26 mmDiveCAN Head2, the printed circuit board in 3D

    DiveCAN Head2

    QuickRecon/DiveCANHead

    An open source rebreather head controller

    157 parts13MIT
  • 2 layers84.3 × 39.4 mmShutdown manager mainboard, the printed circuit board in 3D

    Shutdown manager mainboard

    testudor/shutdown-manager-mainboard

    Power input module for 3D printers capable of performing safe shutdown procedures for SBCs like Raspberry PIs

    28 parts1CC-BY-SA-4.0
  • 4 layers65 × 75 mmRp2040 audioboard, the printed circuit board in 3D

    Rp2040 audioboard

    lzptr/rp2040_audioboard

    Mixed signal audio board using the rp2040

    124 partsMIT
  • 2 layers37.3 × 31.8 mmKeyChain, the printed circuit board in 3D

    KeyChain

    Brammert42/EPKeychain

    A keychain equipped with a RP2040 and a E-ink

    88 parts
  • 4 layers100 × 60 mmGigaDFN56, the printed circuit board in 3D

    GigaDFN56

    kaminaris/GigaESC-DFN5x6

    Compact, modular three-phase ESC power board for the GigaESC project. Designed in KiCad 10 on a 100 × 60 mm, four-layer PCB, with separate plug-in control and power-supply boards.

    234 parts

Questions

How big is the ControlPanelV3 PCB?

It measures 35 × 50 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ControlPanelV3 use?

45 parts, built around the STM32G031G8U6, LPW5209AB5F, 0402WGF1002 and BM03B-SRSS-TBT(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ControlPanelV3 KiCad files?

From the synthesissolutions/geeksforkids repository on GitHub, at the commit this page was made from: the board is hardware/Drive Systems/Control Panel (New)/ControlPanelV3/ControlPanelV3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ControlPanelV3 design in my own project?

Its repository states no licence, so its author keeps all rights: ask synthesissolutions before reusing the design.