2 layers96.6 × 82.8 mm
2 layers102.5 × 91.5 mm
Starbie
SYMAIN/Starbie- Size
- 102.5 × 91.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 26
- Pads
- 54
- Tracks, vias
- 30, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 12 Oct 2026
- Updated
- 12 Oct 2026
Overview
Starbie is an open-source printed circuit board by SYMAIN, from the SYMAIN/Starbie repository on GitHub, published under the MIT licence. It is a 2-layer board of 102.5 × 91.5 mm with 7 parts on 26 nets, routed with 30 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
README.mdStarbie
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x04_Pin | Project Starbie:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Project Starbie:MPU6050_Module | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U1 |
| 1 | XIAO-ESP32-C3-SMD | Project Starbie:XIAO-ESP32-C3-SMD | U2 |
Questions
How big is the Starbie PCB?
It measures 102.5 × 91.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starbie use?
7 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starbie KiCad files?
From the SYMAIN/Starbie repository on GitHub, at the commit this page was made from: the board is Starbie.kicad_pcb and its schematic Starbie.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starbie design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5